Shared STM32 Kconfig option definitions from the stm32 (F1/F2/F3/F4/G4/L1)
and stm32f0l0g0 (F0/L0/G0/C0) families moved into arch/arm/src/common/stm32.
Signed-off-by: raiden00pl <raiden00@railab.me>
BREAKING CHANGE: STM32F0/L0/G0/C0 Kconfig symbols were renamed from
CONFIG_STM32F0L0G0_* to CONFIG_STM32_*. Out-of-tree code must update defconfigs
and Kconfig references to the new CONFIG_STM32_* names.
The custom clock option is a special breaking case that does not follow the
family-to-common pattern:
CONFIG_ARCH_BOARD_STM32F0G0L0_CUSTOM_CLOCKCONFIG was renamed to CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG.
Signed-off-by: raiden00pl <raiden00@railab.me>
Add the shared STM32 Kconfig include and introduce the hidden
common ARCH_CHIP_STM32 selector used by concrete STM32 families.
Signed-off-by: raiden00pl <raiden00@railab.me>
Add CONFIG_NRF91_GPIOTE1_NS so the secure firmware can hand the non-secure
GPIOTE instance to the application, allowing a non-secure app to use GPIO
interrupts.
Signed-off-by: raiden00pl <raiden00@railab.me>
Port the GPIOTE driver from nrf53, which shares the same secure/non-secure
TrustZone split. The non-secure application uses GPIOTE1 (the register base
and interrupt are selected by the build security domain). This provides GPIO
edge interrupts, e.g. for board buttons.
Signed-off-by: raiden00pl <raiden00@railab.me>
Coexistence policy does not belong in the driver. Replace the in-driver
priority-boost arbitration (the NRF91_MODEM_GNSS_BOOST_PRIO knob and the
NOT_ENOUGH_WINDOW_TIME counter heuristic) with a user space mechanism:
SNIOC_GNSS_SET_PRIORITY toggles nrf_modem_gnss priority mode on request,
leaving the when-to-use-it decision to the application.
Signed-off-by: raiden00pl <raiden00@railab.me>
When calling Set RF Configuration command, a compromised user
process can trigger memory corruption in the kernel. This can
lead to a system crash or potentially arbitrary code execution
in the kernel.
It addresses an earlier incomplete fix.
Tested locally.
Signed-off-by: Your Name <catalin_visinescu@yahoo.com>
The GNSS datetime reported by the modem is UTC. mktime() interprets the
broken-down time as local time, so a configured timezone would skew the
reported epoch. Use timegm() to convert it directly as UTC.
Signed-off-by: raiden00pl <raiden00@railab.me>
When the GNSS sensor is opened before the LTE stack has powered the modem
on, the modem is not yet in a GNSS-capable functional mode. Instead of
failing the activate with -EACCES, remember the request (priv->pending)
and let the GNSS thread poll the modem functional mode (AT+CFUN?) and
start GNSS once it becomes GNSS-capable. The LTE stack keeps ownership of
modem power.
Extract the configure/start sequence into nrf91_gnss_start() so it can be
used both from nrf91_gnss_enable() and from the thread's CFUN poll.
Signed-off-by: raiden00pl <raiden00@railab.me>
Adds a pre-load permission check in exec_internal() to verify the
calling task has the required execute (x) bits for the target file.
Properly evaluates root (euid == 0), owner, group, and other permissions.
This ensures POSIX compliance and cleanly rejects unauthorized files
with -EACCES before they reach the ELF loader, preventing unnecessary
memory allocation and downstream hardware execution faults.
Signed-off-by: Abhishek Mishra <mishra.abhishek2808@gmail.com>
BREAKING CHANGE: Public STM32WL5 interfaces were renamed from stm32wl5_*
forms to canonical stm32_* forms across arch and board headers/sources.
Public type names in STM32WL5 timer/GPIO/EXTI and related API-facing
declarations were normalized to stm32_* equivalents.
The STM32WL5 root family header was renamed from stm32wl5.h to stm32.h;
all STM32WL5 arch/board includes were updated accordingly.
Signed-off-by: raiden00pl <raiden00@railab.me>
BREAKING CHANGE: Public STM32WB interfaces were renamed from stm32wb_*
forms to canonical stm32_* forms across arch and board headers/sources.
Public type names in STM32WB timer/dma/freerun/oneshot/GPIO/EXTI and
related API-facing declarations were normalized to stm32_* equivalents.
The STM32WB root family header was renamed from stm32wb.h to stm32.h;
all STM32WB arch/board includes were updated accordingly.
Signed-off-by: raiden00pl <raiden00@railab.me>
BREAKING CHANGE: Public STM32L5 interfaces were renamed from stm32l5_* forms
to canonical stm32_* forms across arch and board headers/sources.
Public type names in STM32L5 timer/GPIO/EXTI and related API-facing
declarations were normalized to stm32_* equivalents.
The STM32L5 root family header was renamed from stm32l5.h to stm32.h;
all STM32L5 arch/board includes were updated accordingly.
Signed-off-by: raiden00pl <raiden00@railab.me>
BREAKING CHANGE: Public STM32L4 interfaces were renamed from stm32l4_* forms to
canonical stm32_* forms across arch and board headers/sources.
Public type names were normalized to stm32_*
equivalents (including timer/lptimer/dma/freerun API-facing types), and
stm32l4can_initialize() was renamed to stm32_caninitialize().
The STM32L4 root family header was renamed from stm32l4.h to stm32.h;
all STM32L4 arch/board includes were updated accordingly.
Signed-off-by: raiden00pl <raiden00@railab.me>
BREAKING CHANGE: Public STM32F7 APIs were renamed from stm32f7_*
and stm32f7x9_* forms to canonical stm32_* names.
Signed-off-by: raiden00pl <raiden00@railab.me>
NuttX builtin up_udelay function uses BOARD_LOOPSPERMSEC configuration
value to determine how many loops need to be done to cause requested
delay. This does not match well with AVR DA/DB microcontrollers
because the CPU clock frequency is configurable.
A board configuration could therefore provide BOARD_LOOPSPERMSEC
valid for one frequency but for other frequencies, the user would
be required to calibrate the value and would still get incorrect
result when changing the clock speed during runtime.
This patch therefore implements dynamic architecture-specific
up_udelay function which determines current clock settings
and infers required loop count from that.
New function was tested by simple application that used up_udelay
to put delays between printf calls.
Signed-off-by: Kerogit <kr.git@kerogit.eu>
This patch adds support for reading CPU clock frequency when the MCU
is driven by clock source other than high frequency oscillator.
Signed-off-by: Kerogit <kr.git@kerogit.eu>
While attempting to create architecture-specific implementation
of up_udelay, it was discovered that the overriding function is not
included in the final binary, the weak implementation was used instead.
Further investigation and experimentation showed that the linker
only overrides the weak implementation with the custom one if
the custom one is present in a .c source file that contains at least
one other function that is called from somewhere. Some additional
testing revealed that at least one other already present up_udelay
override (rv32m1-vega:nsh) is affected by this.
In a short mailing list discussion it was determined that this
is a likely result of using static libraries during the build process
and it was suggested to introduce configuration option that will
exclude weak implementations of the function from the build altogether.
This patch does that.
This patch does not enable this configuration option for any existing
board/chip because doing so would change its behaviour and needs
to be tested by users of the hardware.
Also changed is the static assertion in sched/clock/clock_delay.c
to not prevent building the code when architecture declares that
it does not use BOARD_LOOPSPERMSEC to determine required loop count.
BOARD_LOOPSPERMSEC is made undefined in such case.
Patch was tested by building breadxavr:nsh (identical binary by SHA256),
rv32m1-vega:nsh (identical text section) and rv-virt:nsh (text section
differs because of different ordering of functions in the binary, ostest
passed though.)
Signed-off-by: Kerogit <kr.git@kerogit.eu>
This patch amends commit dfd3426aa5 which added support for running
with some signals disabled to AVR architecture. AVR DA/DB architecture
was not covered by the commit and failed to build
with CONFIG_ENABLE_ALL_SIGNALS unset (which includes building
with CONFIG_ENABLE_PARTIAL_SIGNALS, the default value.)
Change is replicated from the commit and tested by a custom stress
application which spawns some always-busy threads and uses preemptive
multitasking to switch between them. Additionally, ability to sleep
in the application was tested by a simple LED blinking application.
Signed-off-by: Kerogit <kr.git@kerogit.eu>
This patch amends commit f077c0321d which is a part of series that
changed (in commit 48db502daf) default value of BOARD_LATE_INITIALIZE
to yes. With this change, the boards are required to provide
board_late_initialize function.
Commit f077c0321d added this function to many AVR boards but
not to this one, making the build with default configuration
fail. This patch rectifies that and provides an empty function.
With this patch applied, the build no longer fails.
Signed-off-by: Kerogit <kr.git@kerogit.eu>
Add documentation for the conntrack command including usage, options,
output format, and examples for listing and monitoring connection
tracking entries.
Signed-off-by: hanzhijian <hanzhijian@zepp.com>
BREAKING CHANGE: STM32N6 non-standard hardware definition macros
(IRQ, peripheral-count, SRAM and related) were renamed to the common
STM32_* prefix. Out-of-tree code must update the affected references.
Signed-off-by: raiden00pl <raiden00@railab.me>
BREAKING CHANGE: STM32WL5 non-standard hardware definition macros
(IRQ, peripheral-count, SRAM and related) were renamed to the common
STM32_* prefix. Out-of-tree code must update the affected references.
Signed-off-by: raiden00pl <raiden00@railab.me>
BREAKING CHANGE: STM32WB non-standard hardware definition macros
(IRQ, peripheral-count, SRAM and related) were renamed to the common
STM32_* prefix. Out-of-tree code must update the affected references.
Signed-off-by: raiden00pl <raiden00@railab.me>
BREAKING CHANGE: STM32U5 non-standard hardware definition macros
(IRQ, peripheral-count, SRAM and related) were renamed to the common
STM32_* prefix. Out-of-tree code must update the affected references.
Signed-off-by: raiden00pl <raiden00@railab.me>
BREAKING CHANGE: STM32L5 non-standard hardware definition macros
(IRQ, peripheral-count, SRAM and related) were renamed to the common
STM32_* prefix. Out-of-tree code must update the affected references.
Signed-off-by: raiden00pl <raiden00@railab.me>
BREAKING CHANGE: STM32L4 non-standard hardware definition macros
(IRQ, peripheral-count, SRAM and related) were renamed to the common
STM32_* prefix. Out-of-tree code must update the affected references.
Signed-off-by: raiden00pl <raiden00@railab.me>
BREAKING CHANGE: STM32H7 non-standard hardware definition macros
(IRQ, peripheral-count, SRAM and related) were renamed to the common
STM32_* prefix. Out-of-tree code must update the affected references.
Signed-off-by: raiden00pl <raiden00@railab.me>
BREAKING CHANGE: STM32H5 non-standard hardware definition macros
(IRQ, peripheral-count, SRAM and related) were renamed to the common
STM32_* prefix. Out-of-tree code must update the affected references.
Signed-off-by: raiden00pl <raiden00@railab.me>
BREAKING CHANGE: STM32F7 non-standard hardware definition macros
(IRQ, peripheral-count, SRAM and related) were renamed to the common
STM32_* prefix. Out-of-tree code must update the affected references.
Signed-off-by: raiden00pl <raiden00@railab.me>
Adds comprehensive documentation for the POSIX three-tier user identity
model (real, effective, saved-set IDs) enabled by CONFIG_SCHED_USER_IDENTITY.
* Updates sched/Kconfig with detailed help text explaining the config.
* Adds user_identity.rst to formally document credential inheritance
and the privilege transition rules for setuid(), seteuid(), setgid(),
and setegid().
* Updates tasks_vs_threads.rst to list credentials as a shared task
group resource.
Signed-off-by: Abhishek Mishra <mishra.abhishek2808@gmail.com>
Adds tg_suid and tg_sgid fields to task_group_s to complete the
POSIX three-field identity model (real, effective, saved-set).
Updates group_inherit_identity() to propagate the new fields from
parent to child task group on task creation.
Fixes setuid(), setgid(), seteuid(), and setegid() to implement
correct POSIX privilege transition logic:
- Root (euid==0): may set any value; all three IDs updated by setuid/setgid
- Non-root: may only set effective ID to real or saved value; else EPERM
Signed-off-by: Abhishek Mishra <mishra.abhishek2808@gmail.com>
This fixes an issue where ostest robust mutex test gets stuck.
In CONFIG_PTHREAD_MUTEX_ROBUST mode, every NORMAL mutex is robust by
definition, so the robust flag must be set to allow the mutex to be tracked
in the holder's mutex list.
Otherwise, pthread_mutex_add() will not record the mutex and
pthread_mutex_inconsistent() will not be able to mark it as inconsistent or
wake waiters when the holder thread terminates.
Signed-off-by: Jukka Laitinen <jukka.laitinen@tii.ae>
Initialize i_owner and i_group from the creating task's
effective uid/gid when a pseudo-file is created via O_CREAT.
This aligns pseudo-file ownership with the creator's
effective credentials instead of leaving new files
root-owned by default.
Signed-off-by: Abhishek Mishra <mishra.abhishek2808@gmail.com>
up_disableusartint() saves USART interrupt state from hardware CTL0-CTL3
registers but omits the CTL selector bits (bits 24-27) in the encoded
ie value. When up_restoreusartint() later restores interrupts, it uses
ie >> 24 to determine which CTL register to write. Without selector bits
this evaluates to 0, so no CTL register is updated and all interrupt
enables (including RBNEIE) are permanently lost.
This causes RX interrupts to never fire after any call to up_putc()
(e.g. via syslog), making the serial console unable to receive input.
Fix by adding the corresponding CTL selector bit (USART_CFG_CTLx_INT
<< USART_CFG_SHIFT) whenever a CTL register has active interrupt bits.
Signed-off-by: lccosy <1191294205@qq.com>
We can apply file lock on SHM inode as well. Ensure file_lock_get_path
function passes and doesn't return EBADF errno.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
We need to use gettid instead of getpid, otherwise flocks applied
from different threads are considered as single thread lock and are
ignored (or updated).
Also fix the behavior if process opens the file multiple times
Linux/BSD manual states multiple file descriptors opened by a single
process shall be treated independently. Therefore we also need to
compare struct file pointer to determine whether the lock applies
to the same descriptor or not.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
up_rtc_rdalarm() computed tv_sec and tv_nsec from two separate
evaluations of rt_timer_time_us() + offset + deadline. The RT timer
advances between the two calls, so a read that straddles a second
boundary yields an inconsistent timespec.
Compute the microsecond value once into a local variable and derive
both fields from that single snapshot.
Signed-off-by: yushuailong <yyyusl@qq.com>
esp_rtc_rdalarm() computed tv_sec and tv_nsec from two separate
evaluations of esp_hr_timer_time_us() + offset + deadline. The
high-resolution timer advances between the two calls, so a read that
straddles a second boundary yields an inconsistent timespec.
Compute the microsecond value once into a local variable and derive
both fields from that single snapshot.
Signed-off-by: yushuailong <yyyusl@qq.com>
esp_rtc_rdalarm() computed tv_sec and tv_nsec from two separate
evaluations of esp_hr_timer_time_us() + offset + deadline. The
high-resolution timer advances between the two calls, so a read that
straddles a second boundary yields an inconsistent timespec.
Compute the microsecond value once into a local variable and derive
both fields from that single snapshot.
Signed-off-by: yushuailong <yyyusl@qq.com>
up_timer_gettime() computed tv_sec and tv_nsec from two separate calls
to current_usec(), which returns a free-running microsecond counter.
The counter advances between the two calls, so a read that straddles a
second boundary yields an inconsistent (possibly backwards) timespec.
Read current_usec() once into a local variable and derive both fields
from that single snapshot.
Signed-off-by: yushuailong <yyyusl@qq.com>
