Spliting `THERMAL_NORMAL` to `THERMAL_ACTIVE` and `THERMAL_PASSIVE`,
to support different update intervals for thermal zone.
Active/Passive from [kernel.org](https://www.kernel.org/doc/Documentation/devicetree/bindings/thermal/thermal.txt):
* Cooling device nodes
Cooling devices are nodes providing control on power dissipation. There
are essentially two ways to provide control on power dissipation. First
is by means of regulating device performance, which is known as passive
cooling. A typical passive cooling is a CPU that has dynamic voltage and
frequency scaling (DVFS), and uses lower frequencies as cooling states.
Second is by means of activating devices in order to remove
the dissipated heat, which is known as active cooling, e.g. regulating
fan speeds. In both cases, cooling devices shall have a way to determine
the state of cooling in which the device is.
Signed-off-by: wangjianyu3 <wangjianyu3@xiaomi.com>
Instead of enabling an interrupt on the calling hart, enable it on every
hart. This should balance the interrupt load some, especially in cases
where the interrupt source is enabled only once (which will almost
certainly happen on CPU 0 only).
Signed-off-by: Ville Juven <ville.juven@unikie.com>
When the l1entry first add to shm, mssing l1entry add.
shm mmu flags should use udata flags.
l1entry record in shm[] and should not use ~SECTION_MASK
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
chip/sam_1wire.c:921:7: warning: implicit declaration of function 'sam_usart0_enableclk' [-Wimplicit-function-declaration]
921 | sam_usart0_enableclk();
The same warning applied for other uart/usart peripherals configured
as 1 wire.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Unfortunately new contributors used to submit code with many coding
issues. And in fact it is our guilt: our codign style documentation
doesn't say to them how to use the checkpatch to find the issues.
Signed-off-by: Alan C. Assis <acassis@gmail.com>
This commit adds support to TIOCGICOUNT for STM32, this way a
userspace application can collect information about UART errors.
Signed-off-by: Alan C. Assis <acassis@gmail.com>
This commit add support to the serial_icounter_s struct used with
TIOCGICOUNT to report U[S]ART errors such as frame, parity, overrun,
etc.
Signed-off-by: Alan C. Assis <acassis@gmail.com>
Summary:
- Added a section on editor integration for Rust development in NuttX, focusing on VS Code and rust-analyzer
- Provides steps to configure `.vscode/settings.json` to recognize Rust project structure and optional settings for custom target specifications
Impact:
- Enhances developer productivity by providing better IDE support for Rust in NuttX
- No impact on existing functionality; the guide is purely informational and configuration-based
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
The valid addresses should be 0x6a and 0x6b, not 0x6c. Now the device
can be registered with the correct addresses without failing the
assertion.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
boards/nucleo-g431rb: fix CAN bit timings, calculated with https://phryniszak.github.io/stm32g-fdcan/
also update bit rate to 250000 so it's the same as for other stm32 boards
Signed-off-by: raiden00pl <raiden00@railab.me>
Addrenv is changed to the newly created process' one in the beginning of
modlib_bind, and needs to be changed always when returning from the function;
also in error cases.
Signed-off-by: Jukka Laitinen <jukka.laitinen@tii.ae>
An example implementation for OpenAMP based on the Inter-VM share memory(ivshmem)::
rpproxy_ivshmem: Remote slave(client) proxy process.
rpserver_ivshmem: Remote master(host) server process.
Please refer to the official Qemu ivshmem documentation for more information:
https://www.qemu.org/docs/master/system/devices/ivshmem.html
Signed-off-by: chao an <anchao.archer@bytedance.com>
Function w25qxxxjv_erase wasn't correctly handling an error in
w25qxxxjv_erase_sector call and was returning success even on failure.
Moreover this change does not immediately return EBUSY but waits for
the previous operation to finish. If the timeout is significant (more
than erase time of the entire flash), then it returns EBUSY.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
1. fix https://github.com/apache/nuttx/issues/14774.
Change the defconfig of libcxxtest and select libcxxabi by default to
fix sim:libcxxtest build in macOS CI can't find cxxabi.h.
2. fix https://github.com/apache/nuttx/issues/15491.
libcxxabi cannot be used with uclibc, so when compiling macos sim, libcxxabi cannot be selected by default in Kconfig.
Signed-off-by: cuiziwei <cuiziwei@xiaomi.com>
