reason:
To remove the "sync pause" and decouple the critical section from the dependency on enabling interrupts,
after that we need to further implement "schedlock + spinlock".
changelist
1 Modify the implementation of critical sections to no longer involve enabling interrupts or handling synchronous pause events.
2 GIC_SMP_CPUCALL attach to pause handler to remove arch interface up_cpu_paused_restore up_cpu_paused_save
3 Completely remove up_cpu_pause, up_cpu_resume, up_cpu_paused, and up_cpu_pausereq
4 change up_cpu_pause_async to up_send_cpu_sgi
Signed-off-by: hujun5 <hujun5@xiaomi.com>
tools/configure.sh esp32c3-generic:wifi
wapi scan wlan0
has no return result after couple times
rootcause:
mq_timedsend() return failed because the time valid check error.
the ts_nsec is bigger than 1000000000.
esp_update_time() hasn't consider of the ns > 1s after the adding
calculation
Signed-off-by: ligd <liguiding1@xiaomi.com>
Add heap current used to note.
Plot it in segger sysview data plot.
Signed-off-by: xuxingliang <xuxingliang@xiaomi.com>
Signed-off-by: Neo Xu <neo.xu1990@gmail.com>
Record all memory allocation and release, save to ram, used to analyze memory allocation rate and memory usage
Its absolute value is not trustworthy because the memory will be allocated in thread A and released in thread B
netinit-5 [0] 0.105984392: tracing_mark_write: C|5|Heap Usage|96|free: heap: 0x606000000020 size:24, address: 0x603000000370
netinit-5 [0] 0.105996874: tracing_mark_write: C|5|Heap Usage|24|free: heap: 0x606000000020 size:72, address: 0x6070000008e0
nsh_main-4 [0] 3.825169408: tracing_mark_write: C|4|Heap Usage|2177665|free: heap: 0x606000000020 size:424, address: 0x614000000840
nsh_main-4 [0] 3.825228525: tracing_mark_write: C|4|Heap Usage|14977|free: heap: 0x606000000020 size:2162688, address: 0x7f80a639f800
nsh_main-4 [0] 3.825298789: tracing_mark_write: C|4|Heap Usage|15189|malloc: heap: 0x606000000020 size:20, address: 0x6030000003a0
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
Signed-off-by: Neo Xu <neo.xu1990@gmail.com>
1. Kconfig - Removed USART1 config option from STM32_STM32G47XX. Not necessary to adding LPUART functionality. 2. stm32_lowput.c - Added extra check from STM32G4 board because that is the only with LPUART functionality. 2. stm32_serial.c - Removed unneeded function (stm32_serial_get_lpuart). Fixed up_putc return bug. Added configuration for DMAMAP_LPUART RX and TX for STM32G4XXX only. The G4 is the only in this family with LPUART and uses a DMAMUX unlike the others.
1. Removed 1WIRE LPUART refereences in Kconfig and stm32_uart.h. There is no support for LPUART currently in stm32_1wire.c. 2. Removed references to LPUART under DMA_V2 ifdefs. STM32G4 uses DMA_V1, and I saw that none of the chips DMA_V2 (F20, F4) have LPUARTs. AFAIK the only chip in the stm32 folder that has LPUART peripherals is the STM32G4.
Removed unnecessary brackets and empty lines
Added lpuartnsh (LPUART NuttShell) config to the nucleo-g474re board configurations. nsh uses USART3 by default. lpuartnsh uses nsh as a template, changes the serial console to LPUART1, and adds the DMA configs to enable DMA for the LPUART.
Added support for using the lpuart prescaler register. Without prescaling the apbclock, 9600 baud is not supported on the G474RE. By utilizing the prescaler, when necessary, we can support nearly any baud rate (300 baud to 30M Mbaud). lowputc defaults to a prescaler of 16 for the lpuart so standard baud rates (9600 to 115200) are supported early in the boot process. Later in stm32_serial.c the ideal prescaler and BRR values are determined.
Added ifdef statements for LPUART code sections not compatible with other chips.
Changed LPUART BRR calcuation to use 64-bit integers.
Feedback from nuttx pull request. Added brackets around single line if/else statements. Reordered lpuartnsh defconfig file.
Fix lpuart brr calculation after attempting to break the calculation into 2 lines.
Removed TAB
reason:
In the kernel, we are planning to remove all occurrences of up_cpu_pause as one of the steps to
simplify the implementation of critical sections. The goal is to enable spin_lock_irqsave to encapsulate critical sections,
thereby facilitating the replacement of critical sections(big lock) with smaller spin_lock_irqsave(small lock)
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Unwinding the kernel stack did not work previously due to the way the task
startup logic works via nxtask_start and the up_task_start() system call.
After modifying the logic behind those, the kernel stack is in fact fully
unwound when return_from_exception is executed, so calling the original
hack "riscv_current_ksp" is not necessary anymore.
This removes 2 reserved system calls and replaces them with an ASM snippet.
The result removes an unnecessary ecall from the process startup logic, as
well as ensures the stacks are FULLY unwound when the user process starts.
The logic is ported from ARM64.
Port the simplification from ARM64, this removes the ugly inline assembly
trampoline "do_syscall" and replaces it with a simple table lookup and
call via function pointer.
signal handler stack must be properly aligned, otherwise vector instructions doesn't work in signal handler
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
move initial RSP for AP cores below regs area.
otherwise IDLE thread for AP cores can be corrupted
XCP region now match regs allocation in up_initial_state()
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
use reserved[2] in struct resource_table as the command, avoid the
resource table format do not follow the standard.
Signed-off-by: Yongrong Wang <wangyongrong@xiaomi.com>
Since FPU is now always saved into the current process stack location
upon exception entry, there is no need to keep fpu_regs (or saved_fpu_regs)
in the TCB.
Correct some of the cache operations:
- EP0 request length was handled incorrectly
- Received data cache invalidate was exceeding the received buffer
- writedtd is also called with no data (EP0 ACK/NACK). Don't touch cache in that case.
Fix trip wire handling to conform with the IMX93 reference manual
Also add DEBUGASSERTS for future to check the validity of pointers and sizes
Co-authored-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
