During the Toybox port to NuttX, Claude noticed that changes in the
menuconfig weren't taking affect. This issue exists for a long time on
NuttX, in fact BayLibre's presentation from 2017 make jokes about our
building system not been reliable:
https://www.youtube.com/watch?v=XUJK2htXxKw&t=320s
Stale archive members from $(AR)'s additive-only behavior can linger
after Kconfig toggles change which files provide a symbol, causing dead
weight or "multiple definition" link errors on incremental builds.
Fixed by splitting ARCHIVE into two macros: ARCHIVE keeps the original
additive behavior for apps/libapps.a, which many independent
subdirectories contribute to across a build, while the new
ARCHIVE_REBUILD deletes then archives for the far more common case
of a single Makefile building its own self-contained $(OBJS)
- all 39 such call sites now use it.
Assisted-By: Claude Sonnet 5
Signed-off-by: Alan C. Assis <acassis@gmail.com>
Add EHCI and OHCI USB host drivers for the Ingenic JZ4780 SoC, derived
from the existing sama5 implementation.
Additionally, introduce the display controller driver using code ported
from FreeBSD under its original license terms. Note that this driver
lacks EDID support and is currently hardcoded to 1360x768.
Update the linker script memory layout to utilize the full 256 MiB RAM,
excluding the 8 MiB reserved at the top of memory for the framebuffer.
Signed-off-by: Lwazi Dube <lwazeh@gmail.com>
The common mips_cache.S only handles generic L1 cache operations and
does not support L2 (secondary) cache operations required for the
JZ4780 target.
This commit introduces mti_cache.S to support both L1 and L2 cache
operations.
The mti_cache.S implementation is BSD licensed from Imagination
Technologies.
Signed-off-by: Lwazi Dube <lwazeh@gmail.com>
Introduce networking capabilities to the Creator CI20 board by leveraging
the pre-existing dm9000 ethernet driver.
To achieve this, the following changes were made:
- Integrated the jz4780 GPIO module to properly configure and enable the
interrupt pin required by the ethernet controller.
- Added `dm90x0.h` to export the dm9000 initialization function, allowing
the board-specific setup code to initialize the network interface.
Signed-off-by: Lwazi Dube <lwazeh@gmail.com>
This commit introduces a rudimentary architecture and board port for the
MIPS Creator CI20, featuring the dual core Ingenic JZ4780 SoC (MIPS32).
Included in this initial implementation:
- Basic architectural initialization and startup code for the JZ4780 Core 0.
- Minimal configuration required to execute from RAM.
- Early UART/serial console support for basic debugging and NSH output.
- Minimal board-specific configuration for the CI20 target.
- Console output is routed via UART0 on the expansion header.
This establishes basic support for running NuttX on the MIPS CI20.
Further peripherals, optimization, and extended documentation are left for
future iterations or community contributions.
Build and Runtime Deployment Info:
----------------------------------
The baseline can be configured, compiled using the MIPS MTI toolchain,
and loaded via U-Boot using the following commands (replace
<tftp_dir> with your local TFTP root directory).
./tools/configure.sh -l ci20/nsh
make CROSSDEV=mips-mti-elf-
mkimage -A mips -O linux -T kernel -C none -a 0x80000180 -e 0x800004ac \
-n "nx" -d nuttx.bin <tftp_dir>/nuttx.umg
Note: U-Boot must be properly configured for networking (e.g., valid ipaddr,
serverip, and ethaddr environment variables) to fetch the image over TFTP.
Run this from U-Boot prompt:
tftp nuttx.umg && bootm $fileaddr
Signed-off-by: Lwazi Dube <lwazeh@gmail.com>
Now that time_t is unconditionally 64-bit (signed int64_t) and the
struct timespec fields tv_sec / tv_nsec are wide enough on their own,
the explicit (uint64_t)/(int64_t)/(int) casts that used to guard the
multiplications and subtractions in *_us / *_ms / *_ns helpers are no
longer needed. Drop them to keep the timekeeping math readable and
consistent with the previous sclock_t/time_t cleanup.
In the same spirit, this commit also:
* Normalises the printf-style format specifiers and casts used to
print tv_sec / tv_nsec / tv_usec values across arch/, drivers/,
fs/, sched/ and libs/. The prior code was a mix of
"%d"/"%u"/"%ld"/"%lu"/"%lld"/PRIu32/PRIu64 with matching
(int)/(unsigned long)/(long long)/PRIu* casts; some formats
truncated time_t on 32-bit hosts, others mismatched signedness or
width. Replace all such cases with the portable POSIX-recommended
forms:
- tv_sec (time_t, signed, impl-defined width) -> %jd + (intmax_t)
- tv_nsec (long, signed) -> %ld (no cast)
- tv_usec (suseconds_t / long) -> %ld (no cast)
Add #include <stdint.h> where required.
* Drops a few stale `(FAR const time_t *)&ts.tv_sec` casts and
related `(FAR struct tm *)` / `(const time_t *)` casts in
gmtime_r() / localtime_r() / gmtime() callers; ts.tv_sec is plain
time_t now and the casts only obscured the type.
* Fixes one overflow in fs/procfs/fs_procfscritmon.c where
all_time.tv_sec * 1000000 could overflow on 32-bit time_t before
being multiplied again; cast to uint64_t at the start.
No behavioural change.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
POSIX leaves the signedness of time_t and clock_t unspecified, but
mainstream implementations (Linux glibc/musl, the BSDs, macOS, RTEMS,
Zephyr's POSIX layer, Windows _time64) expose time_t as signed 64-bit.
NuttX has historically used uint64_t only because it was tied to the
CONFIG_SYSTEM_TIME64 knob; with that gone, switch:
time_t : uint64_t -> int64_t
clock_t : uint64_t -> int64_t
CLOCK_MAX: UINT64_MAX -> INT64_MAX
This lets (time_t)-1 sentinels, negative tick deltas, and host-side
headers behave as on every other POSIX system without source churn.
Headers updated:
- include/sys/types.h, include/limits.h, include/nuttx/clock.h
- include/nuttx/fs/hostfs.h (nuttx_time_t alias)
- include/nuttx/{mqueue.h,wdog.h,wqueue.h,timers/clkcnt.h}
Because clock_t is now signed 64-bit, the NuttX-internal sclock_t
alias becomes redundant: every sclock_t/SCLOCK_MAX use is folded
back to clock_t/CLOCK_MAX (notably in sched/wdog, sched/mqueue,
sched/sched, sched/clock, sched/timer, libs/libc/time, fs/vfs and
the drivers/arch consumers below).
Tick/period constants (NSEC_PER_SEC, USEC_PER_SEC, MSEC_PER_SEC,
SEC_PER_MIN, ...) in include/nuttx/clock.h are retyped from "long"
literals to INT64_C(...) so that 64-bit arithmetic no longer
depends on the host's long width.
Strip now-redundant (time_t)/(clock_t)/(unsigned long) casts and
unsigned-only branches across the tree:
- arch RTC / oneshot / tickless lowerhalfs:
arm: cxd56xx, efm32, imxrt, lc823450, max326xx, sam34, sama5,
samd5e5, samv7, stm32, stm32f7, stm32h7, stm32l4, stm32wb,
xmc4
mips: pic32mz sparc: bm3803 x86_64: intel64
risc-v/xtensa: espressif (esp_i2c[_slave], esp_rtc,
esp32c3{_i2c,_rtc,_wifi_adapter}, esp32{,s2,s3}_*),
mpfs_perf
- drivers: audio/tone, input/aw86225, power/pm/{activity,
stability}_governor, rpmsg/rpmsg_ping,
timers/{ds3231,mcp794xx,pcf85263,rx8010},
wireless/ieee80211/bcm43xxx, wireless/spirit/spirit_spi
- core: fs/vfs/{fs_poll,fs_timerfd}, mm/iob/iob_alloc,
libs/libc/{netdb/lib_dnscache,time/{lib_calendar2utc,
lib_time}}, net/icmp/icmp_pmtu, net/icmpv6/icmpv6_pmtu,
net/ipfrag, net/tcp/{tcp.h,tcp_timer},
net/utils/net_snoop, net/mld/mld_query (drop the now-dead
mld_mrc2mrd helper since signed math handles it directly),
sched/clock/{clock,clock_initialize},
sched/sched/{sched_profil,sched_setparam,sched_setscheduler},
sched/pthread/pthread_create,
sched/wdog/{wd_gettime,wd_start,wdog.h},
sched/timer/timer_gettime, sched/mqueue/*
Flip the few in-tree printf format strings that assumed an
unsigned 64-bit tv_sec:
* drivers/rpmsg/rpmsg_ping.c PRIu64 -> PRId64
* arch/xtensa/src/esp32{,s2,s3}/esp32*_oneshot_lowerhalf.c
PRIu32 (already wrong) -> PRId64
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
The 32-bit system clock has a limited range (~497 days) and the
configuration knob is no longer worth the complexity given that
practically every modern target already enables it. Make 64-bit
time_t/clock_t/sclock_t/nuttx_time_t the only supported flavor.
Specifically:
- Drop the SYSTEM_TIME64 Kconfig option and its dependent
PERF_OVERFLOW_CORRECTION/HRTIMER guards in sched/Kconfig.
- Remove every #ifdef CONFIG_SYSTEM_TIME64 branch in headers
(include/{sys/types.h,limits.h,inttypes.h,nuttx/clock.h,
nuttx/fs/hostfs.h}) and core code paths
(sched/clock/clock.h, drivers/power/pm/pm_procfs.c,
drivers/rpmsg/rpmsg_ping.c, fs/procfs/fs_procfsuptime.c,
libs/libc/wqueue/work_usrthread.c,
arch/avr/src/avrdx/avrdx_timerisr_tickless_alarm.c).
- Strip CONFIG_SYSTEM_TIME64=y from every board defconfig.
- Update Documentation/guides/rust.rst accordingly.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
debug.h is a NuttX-specific, non-POSIX header. Placing it in the
top-level include/ directory creates naming conflicts with external
projects that define their own debug.h.
This commit moves the canonical header to include/nuttx/debug.h,
following the NuttX convention for non-POSIX/non-standard headers,
and updates all in-tree references.
A backward-compatibility shim is left at include/debug.h that
emits a deprecation #warning and re-includes <nuttx/debug.h>,
allowing out-of-tree code to continue building while migrating.
Signed-off-by: Piyush Patle <piyushpatle228@gmail.com>
Intermediate files of make depend like .ddc and .dds may remain
when make is interrupted. Remove them using make distclean.
Signed-off-by: SPRESENSE <41312067+SPRESENSE@users.noreply.github.com>
since the judgment for network card selection was changed from IS_UP to
IS_RUNNING, drivers that lack carrier_on need to add the carrier_on
operation; otherwise, network access issues will occur.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Extend CONFIG_LIBCXXTOOLCHAIN support to all remaining platforms
in CMake builds by explicitly locating and linking libstdc++.a
from the toolchain. This prevents build failures caused by STL
header/library mismatches where toolchain headers are included
without the corresponding library.
* Adds nuttx_find_toolchain_lib() calls for all platforms.
* Aligns CMake behavior with Make build system.
Signed-off-by: trns1997 <trns1997@gmail.com>
Add validation to ensure allocated stack size does not exceed TLS_MAXSTACK when
CONFIG_TLS_ALIGNED is enabled, and verify proper stack alignment using STACK_ALIGN_MASK
across all architectures. This improves stack safety and prevents potential TLS overflow conditions.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Rename STACK_ALIGNMENT macro to STACKFRAME_ALIGN throughout the codebase
to provide clearer naming semantics. The new name better reflects the macro's
purpose of frame alignment rather than general stack alignment.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Move stack alignment and kernel stack macros from architecture-specific internal
headers to public include/nuttx/irq.h. Consolidates duplicate definitions across
17 architecture families, reducing code duplication while enabling common code
to access these core alignment utilities without architecture dependencies.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Add support to disable signals actions related struct
Co-authored-by: guoshichao <guoshichao@xiaomi.com>
Signed-off-by: Chengdong Wang <wangchengdong@lixiang.com>
After addrenv_switch(), the current running task (this_task) may change due to
deferred work execution. Update all architecture interrupt, syscall, and exit
handlers to re-fetch tcb = this_task() after addrenv_switch(). Ensures scheduler
and context operations use the correct TCB, preventing context corruption and
exceptions across SMP and memory-protected builds.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Many different architectures re-implemented the exact same code for
`up_*delay` because it was originally written as architecture dependent
code. Busy-waiting can be done regardless of architecture, so this
commit moves that duplicated implementation to a common file with weak
definitions so that individual architectures (see tc32) are still able
to override the definition if needed/desired.
Default implementation is not included if ARCH_TIMER is enabled, since
it is more accurate and provides its own weak definitions to override.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
Complete the missing scheduling information in some architectures
In these architectures (riscv, avr, tricor) context switching
can occur in both up_switch_context and xx_doirq
Co-authored-by: yinshengkai <yinshengkai@xiaomi.com>
Signed-off-by: guoshengyuan1 <guoshengyuan1@xiaomi.com>
These archs only align the size of the stack, forgeting to do the
stack start addr alignment, this patch fixes it.
Signed-off-by: Chengdong Wang <wangchengdong@lixiang.com>
Use this command to extract archives.
Not all architectures are modified, only those commands I know
or could be logically deducted from the rest were added.
Signed-off-by: Stepan Pressl <pressl.stepan@gmail.com>
Renaming "modlib" to "libelf" is more in line with the implementation content,
which makes it easier for individual developers to understand the capabilities of this module.
CONFIG_LIBC_MODLIB -> CONFIG_LIBC_ELF
Signed-off-by: chao an <anchao.archer@bytedance.com>
test:
1.use mps3-an547 build helloxx as module and run it
2.use qemu-armv7a:knsh test kernel build helloxx and run it
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
Inline & inline_function both used make confuze, let's modify all inline
in irq.h to inline_function, also clear the always_inline_funcion
declaration.
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
