nuttx/boards
dechao_gong e2ff8be900 arch/arm/rtl8721dx: add shared Ameba GPIO driver.
Add a board-agnostic GPIO driver for Realtek Ameba chips, exposing pins
through the NuttX GPIO (ioexpander) upper half at /dev/gpioN.

- arch/arm/src/common/ameba/ameba_gpio.{c,h}: the shared driver, sitting
  directly on the SDK fwlib register layer.  The fwlib GPIO API it calls
  resolves at link time from the on-chip ROM symbol table, except
  GPIO_INTStatusGet/ClearEdge which are not in ROM and are compiled in
  from fwlib ram_common/ameba_gpio.c (that object also carries GPIO_Init,
  harmlessly overriding the equivalent ROM copy).  Pin interrupts are
  dispatched NuttX-natively: the port's NVIC vector is owned by NuttX
  via irq_attach, and the ISR reads and clears status through the fwlib
  GPIO_INTStatus* helpers.
- The driver keeps nothing IC-specific: the port count, the per-port
  NVIC vectors and the RCC gate bits come from a per-chip
  <ameba_gpio_chip.h> resolved on the include path, so bringing up a new
  Ameba chip only adds that header, not a change to the shared driver.
- arch/arm/src/common/ameba/Kconfig: a shared "Ameba Peripheral Support"
  menu with the AMEBA_GPIO option, sourced by each Ameba chip's Kconfig so
  it is reused across ICs (RTL8721Dx, RTL8720F, ...).
- arch/arm/src/rtl8721dx: provide ameba_gpio_chip.h, wire the driver into
  both the Make/Kconfig and CMake builds, and compile the fwlib
  ameba_gpio.c register layer into libameba_fwlib for the RTL8721Dx.
- boards/arm/rtl8721dx/pke8721daf: board pin table (rtl8721dx_gpio.c),
  bring-up registration, and a standalone gpio defconfig.
- Documentation: describe the gpio configuration and pin encoding.

tools/nxstyle: whitelist the Ameba "GPIO_" SDK ROM symbol prefix (alongside
the existing FLASH_/IPC_/... Ameba prefixes) so the vendor GPIO API's mixed-case
identifiers do not trip nxstyle, matching how the other Ameba SDK prefixes are
handled.

Assisted-by: Claude Code:claude-opus-4-8
Signed-off-by: dechao_gong <dechao_gong@realsil.com.cn>
2026-07-21 08:34:05 +02:00
..
arm arch/arm/rtl8721dx: add shared Ameba GPIO driver. 2026-07-21 08:34:05 +02:00
arm64 boards/raspberrypi-4b: Add configuration for barometer monitor example 2026-07-20 21:00:46 -03:00
avr boards/avr/avrdx/breadxavr: provide board_late_initialize 2026-06-12 09:55:11 -04:00
dummy
hc/m9s12 boards/hc: Replace board_app_initialize 2026-05-02 18:36:46 +08:00
mips boards/mips: Add networking support to CI20 board 2026-07-17 16:14:14 -03:00
misoc/lm32/misoc !libc/stream: remove CONFIG_LIBC_LONG_LONG and always support long long 2026-05-19 16:21:28 +08:00
or1k/mor1kx/or1k boards/comments: Remove legacy comments 2026-05-04 12:16:11 -03:00
renesas boards/comments: Remove legacy comments 2026-05-04 12:16:11 -03:00
risc-v boards/esp32c3-devkit: Remove Dropbear SSH server support 2026-07-20 15:28:14 -03:00
sim/sim/sim boards/sim: enable CRYPTO_CRYPTODEV for dropbear 2026-07-21 08:33:23 +02:00
sparc !libc/stream: remove CONFIG_LIBC_LONG_LONG and always support long long 2026-05-19 16:21:28 +08:00
tricore !sched/clock: remove CONFIG_SYSTEM_TIME64 and always use 64-bit time 2026-05-19 16:21:28 +08:00
x86/qemu/qemu-i486 boards/comments: Remove legacy comments 2026-05-04 12:16:11 -03:00
x86_64/qemu/qemu-intel64 !sched/clock: remove CONFIG_SYSTEM_TIME64 and always use 64-bit time 2026-05-19 16:21:28 +08:00
xtensa boards/stm32h7/linum-stm32h753bi: enable USB FS host, add lvglterm_kbda 2026-07-08 14:08:16 -04:00
z16/z16f/z16f2800100zcog boards/z16: Replace board_app_initialize 2026-05-02 18:36:46 +08:00
z80 boards/comments: Remove legacy comments 2026-05-04 12:16:11 -03:00
.gitignore
Board.mk !boards: enforce secure ROMFS passwd and TEA key setup 2026-07-09 22:41:11 +08:00
boardctl.c !boards/boardctl: Remove BOARDIOC_INIT 2026-05-26 09:57:29 +08:00
CMakeLists.txt
dummy.c
Kconfig boards/arm64/rk3588s: add Orange Pi 5 Pro support 2026-07-20 20:55:52 -03:00
Makefile