e2ff8be900
Add a board-agnostic GPIO driver for Realtek Ameba chips, exposing pins
through the NuttX GPIO (ioexpander) upper half at /dev/gpioN.
- arch/arm/src/common/ameba/ameba_gpio.{c,h}: the shared driver, sitting
directly on the SDK fwlib register layer. The fwlib GPIO API it calls
resolves at link time from the on-chip ROM symbol table, except
GPIO_INTStatusGet/ClearEdge which are not in ROM and are compiled in
from fwlib ram_common/ameba_gpio.c (that object also carries GPIO_Init,
harmlessly overriding the equivalent ROM copy). Pin interrupts are
dispatched NuttX-natively: the port's NVIC vector is owned by NuttX
via irq_attach, and the ISR reads and clears status through the fwlib
GPIO_INTStatus* helpers.
- The driver keeps nothing IC-specific: the port count, the per-port
NVIC vectors and the RCC gate bits come from a per-chip
<ameba_gpio_chip.h> resolved on the include path, so bringing up a new
Ameba chip only adds that header, not a change to the shared driver.
- arch/arm/src/common/ameba/Kconfig: a shared "Ameba Peripheral Support"
menu with the AMEBA_GPIO option, sourced by each Ameba chip's Kconfig so
it is reused across ICs (RTL8721Dx, RTL8720F, ...).
- arch/arm/src/rtl8721dx: provide ameba_gpio_chip.h, wire the driver into
both the Make/Kconfig and CMake builds, and compile the fwlib
ameba_gpio.c register layer into libameba_fwlib for the RTL8721Dx.
- boards/arm/rtl8721dx/pke8721daf: board pin table (rtl8721dx_gpio.c),
bring-up registration, and a standalone gpio defconfig.
- Documentation: describe the gpio configuration and pin encoding.
tools/nxstyle: whitelist the Ameba "GPIO_" SDK ROM symbol prefix (alongside
the existing FLASH_/IPC_/... Ameba prefixes) so the vendor GPIO API's mixed-case
identifiers do not trip nxstyle, matching how the other Ameba SDK prefixes are
handled.
Assisted-by: Claude Code:claude-opus-4-8
Signed-off-by: dechao_gong <dechao_gong@realsil.com.cn>
|
||
|---|---|---|
| .github | ||
| arch | ||
| audio | ||
| binfmt | ||
| boards | ||
| cmake | ||
| crypto | ||
| Documentation | ||
| drivers | ||
| dummy | ||
| fs | ||
| graphics | ||
| include | ||
| libs | ||
| mm | ||
| net | ||
| openamp | ||
| pass1 | ||
| sched | ||
| syscall | ||
| tools | ||
| video | ||
| wireless | ||
| .asf.yaml | ||
| .codespell-ignore-lines | ||
| .codespellrc | ||
| .editorconfig | ||
| .gitignore | ||
| .gitmessage | ||
| .pre-commit-config.yaml | ||
| .yamllint | ||
| AUTHORS | ||
| CMakeLists.txt | ||
| CONTRIBUTING.md | ||
| INVIOLABLES.md | ||
| Kconfig | ||
| LICENSE | ||
| Makefile | ||
| NOTICE | ||
| README.md | ||
| ReleaseNotes | ||
Apache NuttX is a real-time operating system (RTOS) with an emphasis on standards compliance and small footprint. Scalable from 8-bit to 64-bit microcontroller environments, the primary governing standards in NuttX are POSIX and ANSI standards. Additional standard APIs from Unix and other common RTOSs (such as VxWorks) are adopted for functionality not available under these standards, or for functionality that is not appropriate for deeply-embedded environments (such as fork()).
For brevity, many parts of the documentation will refer to Apache NuttX as simply NuttX.
Getting Started
First time on NuttX? Read the Getting Started guide! If you don't have a board available, NuttX has its own simulator that you can run on terminal.
Documentation
You can find the current NuttX documentation on the Documentation Page.
Alternatively, you can build the documentation yourself by following the Documentation Build Instructions.
The old NuttX documentation is still available in the Apache wiki.
Supported Boards
NuttX supports a wide variety of platforms. See the full list on the Supported Platforms page.
Contributing
If you wish to contribute to the NuttX project, read the Contributing guidelines for information on Git usage, coding standard, workflow and the NuttX principles.
License
The code in this repository is under either the Apache 2 license, or a license compatible with the Apache 2 license. See the License Page for more information.