mirror of
https://github.com/apache/nuttx.git
synced 2026-10-10 07:40:27 +00:00
cc2edca964
The INA226 driver was character mode only, and stayed that way after everything around it moved, because the sensor framework had no type it could publish: there was nothing for volts or amps until now. Add the framework version beside it, in the shape the tree uses for a part with both. The old driver is untouched and still builds by default; the new one replaces it when SENSORS_INA226_UORB is set. The part publishes three topics, voltage, current and power, from a single reading that they all share the timestamp of. Reading once per topic would put three transfers on the bus for one sample and, worse, would leave the three values describing three different instants, which is the wrong property for a power measurement: the product of a voltage and a current measured at different moments is not the power at either. The power is computed here rather than read from the part, because the part's own power register needs its calibration register given a current scale first, and multiplying two values already in hand does not. One worker feeds all three, so it starts when the first topic is subscribed and stops when the last goes away, and the part is left powered down until then rather than converting into a void. Each topic keeps the interval it asked for and the worker runs at the shortest of them, since one reading serves all three. Neither is taken at face value: asking faster than the part converts returns the same reading twice, and a period shorter than a clock tick rounds down to no delay at all, which would leave the worker re-queueing itself with the bus never idle. Both floors are applied and the caller is told what it will actually get, which is what the interface is for. The shunt is rejected if it is zero or negative, which would otherwise divide by zero on the first reading. Assisted-by: Claude:claude-opus-5 Signed-off-by: Justin Hammond <justin@dynam.ac> |
||
|---|---|---|
| .. | ||
| android | ||
| arpa | ||
| crypto | ||
| cxx | ||
| net | ||
| netinet | ||
| netpacket | ||
| nuttx | ||
| ssp | ||
| sys | ||
| .gitignore | ||
| aio.h | ||
| alloca.h | ||
| assert.h | ||
| byteswap.h | ||
| ctype.h | ||
| debug.h | ||
| dirent.h | ||
| dlfcn.h | ||
| dsp.h | ||
| dspb16.h | ||
| elf.h | ||
| elf32.h | ||
| elf64.h | ||
| endian.h | ||
| err.h | ||
| errno.h | ||
| execinfo.h | ||
| fcntl.h | ||
| fixedmath.h | ||
| fnmatch.h | ||
| ftw.h | ||
| gcov.h | ||
| getopt.h | ||
| glob.h | ||
| grp.h | ||
| hex2bin.h | ||
| iconv.h | ||
| ifaddrs.h | ||
| imx_container.h | ||
| inttypes.h | ||
| iso646.h | ||
| langinfo.h | ||
| libgen.h | ||
| libintl.h | ||
| limits.h | ||
| locale.h | ||
| lzf.h | ||
| malloc.h | ||
| mqueue.h | ||
| netdb.h | ||
| nl_types.h | ||
| nxflat.h | ||
| obstack.h | ||
| paths.h | ||
| poll.h | ||
| pthread.h | ||
| pty.h | ||
| pwd.h | ||
| regex.h | ||
| resolv.h | ||
| sched.h | ||
| search.h | ||
| semaphore.h | ||
| shadow.h | ||
| signal.h | ||
| spawn.h | ||
| stdbool.h | ||
| stddef.h | ||
| stdint.h | ||
| stdio.h | ||
| stdlib.h | ||
| stdnoreturn.h | ||
| string.h | ||
| strings.h | ||
| syscall.h | ||
| syslog.h | ||
| termios.h | ||
| threads.h | ||
| time.h | ||
| ulimit.h | ||
| unistd.h | ||
| utime.h | ||
| uuid.h | ||
| wait.h | ||
| wchar.h | ||
| wctype.h | ||