Add support for the QMI8658 6-axis IMU sensor (accelerometer + gyroscope)
on the lckfb-szpi-esp32s3 board.
Changes:
- New esp32s3_qmi8658.c driver initializes sensor on I2C0 at address 0x6A
- Registers uORB devices: /dev/uorb/sensor_accel0 and /dev/uorb/sensor_gyro0
- Adds esp32s3_qmi8658_initialize() function declaration to header
- Integrates with board bringup when CONFIG_SENSORS_QMI8658=y
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Add handling for GPIOC_SETDEBOUNCE to set GPIO pin debounce duration.
Add handling for GPIOC_SETMASK to enable/disable GPIO interrupt mask.
Signed-off-by: chenzihan1 <chenzihan1@xiaomi.com>
Add a safe synchronous hrtimer cancel API, hrtimer_cancel_sync().
If the timer callback is currently executing, this function waits
until the callback has completed and the timer state transitions
to HRTIMER_STATE_INACTIVE.
Signed-off-by: Chengdong Wang <wangchengdong@lixiang.com>
Enhance the hrtimer module description by explaining its purpose
and use cases, making it more readable and understandable for humans.
Signed-off-by: Chengdong Wang <wangchengdong@lixiang.com>
This commit adds documentation for the hrtimer module, including its
design overview and intended use cases.
Signed-off-by: Chengdong Wang <wangchengdong@lixiang.com>
In order to reduce code duplication, use the eeprom/spi_xx25xx
driver within mtd/at25ee.
The eeprom/xxx.h includes have been merged into eeprom/eeprom.h, to
provide a common include file like mtd/mtd.h.
Signed-off-by: Antoine Juckler <6445757+ajuckler@users.noreply.github.com>
This script downloads all NuttX RTOS and Application snapshot packages
from the upstream git repository based on the provided git tags list.
These are NOT official release packages as checkum will differ.
When launched from the local NuttX git repository clone the script will
obtain all available tags to be downloaded, otherwise list of tags needs
to be provided manually (or when just selected tag is required).
This script uses ``wget`` underneath, make sure this tool is installed.
Fetch log file is created with a timestamp in name next to the packages.
Having all tags packaged is important for changes comparison
between specific versions, testing a specific version, compatibility
checks, searching for a feature introduction timeline, etc.
Usage: `./nxtagspkgsfetch.sh [download_path] [tags_list_space_separated]`
You can provide optional download path (default `../../nuttx-packages`)
and tags list to get packages for (default all tags from local git clone).
When providing tags you also need to provide download path.
Documentation update contains new tool description (above).
Signed-off-by: Tomasz 'CeDeROM' CEDRO <tomek@cedro.info>
Upperhalf supports multiple working modes at the same time,
which is specified by NIC when register
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
The secure CPU variant of vexriscv immediately panics after bring up.
However, the linux CPU variant of the vexriscv core does work successfully.
Signed-off-by: Justin Erenkrantz <justin@erenkrantz.com>
Ref: https://man7.org/linux/man-pages/man7/packet.7.html
1. For `socket(AF_PACKET, int socket_type, int protocol)`: When `protocol` is set to `htons(ETH_P_ALL)`, then all protocols are received. If `protocol` is set to zero, no packets are received.
2. For `bind`: `bind` can optionally be called with a nonzero `sll_protocol` to start receiving packets for the protocols specified.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Inspired by Linux's way, we also create VLAN devices for managing VLAN,
which will become interfaces like `eth0.58`.
QinQ is also supported, we can create VLAN devices above another VLAN
devices, like `eth0.100.101` (or even `eth0.1.2.3.4`, also supported on
Linux).
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
As pull request apache#17200 & apache#17368 introduced support for scheduling sleep, a documentation is needed for different sleep interfaces.
This patch adds the description for sleep interfaces currently provided in NuttX, including Scheduled sleep(nxsched_sleep()...), Signal-scheduled sleep(nxsig_sleep()...), and Busy sleep(up_udelay()).
Signed-off-by: Haokun Dong <donghaokun@lixiang.com>
Add support for the page erase (PE), sector erase (SE) and chip erase
(CE) dedicated commands on supported devices.
They can be triggered using the corresponding IOCTL commands
EEPIOC_PAGEERASE, EEPIOC_SECTORERASE and
EEPIOC_CHIPERASE.
On unsupported devices, this is equivalent to writing a full page,
sector, or the entire EEPROM to 0xFF.
Signed-off-by: Antoine Juckler <6445757+ajuckler@users.noreply.github.com>
Updates the docs to the new esp32c3-devkit naming, after deprecating support
for now esp32c3-legacy.
Signed-off-by: Filipe Cavalcanti <filipe.cavalcanti@espressif.com>
This patch adds support for Two-Wire interface in AVR Dx chips.
Only master mode is supported in this version.
The driver was tested using TC74Ax thermal sensor and simple application
that read the temperature from it. (Driver for the sensor is not in-tree.)
Signed-off-by: Kerogit <kr.git@kerogit.eu>
Add complete driver support for the QST QMI8658 6-axis IMU sensor featuring
3-axis accelerometer and 3-axis gyroscope with I2C interface and uORB
integration.
Key features implemented:
* Full I2C communication with configurable frequency (default 400kHz)
* Multiple accelerometer ranges (±2g, ±4g, ±8g, ±16g) and ODR settings
* Multiple gyroscope ranges (±16 to ±1024 dps) with high ODR support
* Low-pass filter configuration for both sensors
* Temperature sensing with 16-bit resolution
* Self-test capability for both accelerometer and gyroscope
* Calibration-on-demand support with offset registers
* FIFO buffer management (framework ready)
* Interrupt-driven and polling mode support
* Complete uORB integration with sensor_accel and sensor_gyro topics
Driver components added:
* Core driver implementation (qmi8658_uorb.c) with register operations
* Header file with register definitions and scale factors (qmi8658.h)
* Kconfig options for driver configuration and polling mode
* Build system integration (CMakeLists.txt, Make.defs)
* Comprehensive documentation with API reference and usage examples
The driver follows NuttX sensor framework conventions and provides
robust error handling, mutex protection, and comprehensive debugging
support through CONFIG_DEBUG_SENSORS.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Support for hardware accelerated HMAC-SHA(1/256) for ESP32
was added, this commit updates the documentation to reflect
this as well.
Signed-off-by: Vlad Pruteanu <pruteanuvlad1611@yahoo.com>
Add EEPIOC_SETSPEED ioctl acting like the MTDIOC_SETSPEED ioctl. The
default frequency is settable in the Kconfig.
Add xx25xx SPI delay control configurations.
Signed-off-by: Antoine Juckler <6445757+ajuckler@users.noreply.github.com>
This adds ability for read and write operations to work with messages
aligned to configured number of bytes. This has few different use
cases.
The alignment is specified as unsigned integer and can be changed with
ioctl command CANIOC_SET_MSGALIGN. The current value can be queried by
CANIOC_GET_MSGALIGN command.
The default value for the message alignment is 1. This will provide
behavior consistent with current one. Thus messages are placed to the
buffer right after data of the previous one. The same applies for
writes.
The special alignment value 0 disables read and write of multiple frames. Thus
read will always return at most one message and write will always write
only one message even if larger buffer size is provided.
Another use case is if message alignment is set to exactly message
representation size (`sizeof(struct can_msg_s)`). This allows writing
and reading arrays of messages.
Other values provide even more advanced and specialized use cases, such
as optimizations if architecture has to emulate some non-aligned
accesses, there alignment of for example 4 bytes could provide
performance boost.
The original motivation behind this is was compatibility with socket
CAN. It is easier to port applications to NuttX's CAN driver if only one
frame is provided at the time. This solution was suggested by Pavel Pisa
<pisa@fel.cvut.cz> as a more versatile variant of plain boolean
disabling the multiple frame retrieval.
Signed-off-by: Karel Kočí <kkoci@elektroline.cz>
This commit adds initial high level overview of the NuttX
make-based build system. It documents:
* Tools used during the build process
* Mechanisms set in place during the build process
Signed-off-by: Luchian Mihai <luchiann.mihai@gmail.com>
- Updated information about the RA4M1 microcontroller capabilities, including the General Purpose Timer (GPT).
- Added information about the PWM driver support for the Arduino R4 Minima board using the GPT timer.
Signed-off-by: leocafonso <leocafonso@gmail.com>
This patch adds the description for NSH_BUILTIN_AS_COMMAND including its advantage and disadvantage.
NSH_BUILTIN_AS_COMMAND is an optional configuration in nsh. It allows nsh builtin apps to run directly like nsh command without creating a thread. This is done in pull request https://github.com/apache/nuttx-apps/pull/3168
Signed-off-by: Haokun Dong <donghaokun@lixiang.com>
reorganize the content structure:
- Add the new "Network Interfaces Overview" section
- Reorganize the document structure and optimize formatting
Signed-off-by: nuttxs <zhaoqing.zhang@sony.com>
Gdbstub support
===========
The Qemu version must be above 9.2 to support two serial ports.
One window:
./tools/configure.sh qemu-armv7a:gdbstub; make -j25
qemu-system-arm -cpu cortex-a7 -nographic -machine virt,virtualization=off,gic-version=2 -net none -kernel ./nuttx -serial mon:stdio -serial pty
char device redirected to /dev/pts/26 (label serial1)
nx_start: Entry
uart_register: Registering /dev/console
uart_register: Registering /dev/ttyS0
Another window:
gdb-multiarch nuttx -ex "target remot /dev/pts/26"
GNU gdb (Ubuntu 15.0.50.20240403-0ubuntu1) 15.0.50.20240403-git
Copyright (C) 2024 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Type "show copying" and "show warranty" for details.
This GDB was configured as "x86_64-linux-gnu".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<https://www.gnu.org/software/gdb/bugs/>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
For help, type "help".
Type "apropos word" to search for commands related to "word"...
Reading symbols from nuttx...
Remote debugging using /dev/pts/26
gdb_get_registers (state=0x402052f8) at gdbstub/lib_gdbstub.c:1020
1020 reg = state->running_regs;
(gdb) c
Signed-off-by: hujun5 <hujun5@xiaomi.com>
