Add support for the QMI8658 6-axis IMU sensor (accelerometer + gyroscope)
on the lckfb-szpi-esp32s3 board.
Changes:
- New esp32s3_qmi8658.c driver initializes sensor on I2C0 at address 0x6A
- Registers uORB devices: /dev/uorb/sensor_accel0 and /dev/uorb/sensor_gyro0
- Adds esp32s3_qmi8658_initialize() function declaration to header
- Integrates with board bringup when CONFIG_SENSORS_QMI8658=y
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Upperhalf supports multiple working modes at the same time,
which is specified by NIC when register
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
This defconfig uses the legacy bootloader (based on ESP-IDF's
bootloader) and, due a recent update on SPI flash support, its
initialization was missing data to be moved to the IRAM during the
boot process.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
Increase LCD PWM frequency from 100Hz to 10kHz to eliminate visible flicker
on the lckfb-szpi ESP32S3 board. The higher frequency provides smoother
backlight control and improves display visual quality.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Updates the SPI Flash driver used for user storage MTD.
Moves ESP32 and ESP32S3 to use common driver.
Updates KConfig options to keep backwards compatibility.
Signed-off-by: Filipe Cavalcanti <filipe.cavalcanti@espressif.com>
Nuttx currently has 2 types of sleep interfaces:
1. Signal-scheduled sleep: nxsig_sleep() / nxsig_usleep() / nxsig_nanosleep()
Weaknesses:
a. Signal-dependent: The signal-scheduled sleep method is bound to the signal framework, while some driver sleep operations do not depend on signals.
b. Timespec conversion: Signal-scheduled sleep involves timespec conversion, which has a significant impact on performance.
2. Busy sleep: up_mdelay() / up_udelay()
Weaknesses:
a. Does not actively trigger scheduling, occupy the CPU loading.
3. New interfaces: Scheduled sleep: nxsched_sleep() / nxsched_usleep() / nxsched_msleep() / nxsched_ticksleep()
Strengths:
a. Does not depend on the signal framework.
b. Tick-based, without additional computational overhead.
Currently, the Nuttx driver framework extensively uses nxsig_* interfaces. However, the driver does not need to rely on signals or timespec conversion.
Therefore, a new set of APIs is added to reduce dependencies on other modules.
(This PR also aims to make signals optional, further reducing the code size of Nuttx.)
Signed-off-by: chao an <anchao.archer@bytedance.com>
Refactor esp32s3_es8311_initialize function to accept I2C handle instead
of port number, moving I2C bus initialization responsibility to the board
bringup code. This change improves flexibility by allowing boards to
manage I2C initialization while the ES8311 driver focuses on audio
codec configuration.
* Updated function signature to accept struct i2c_master_s *i2c parameter
* Removed I2C bus initialization from ES8311 driver
* Updated function documentation to reflect new parameter
* Modified esp32s3-lcd-ev and esp32s3-korvo-2 boards to initialize I2C
before calling ES8311 initialization
* Added proper error handling for I2C initialization failures
* Moved variable declarations to function start for C89 compliance
* Fixed code style issues including line length and indentation
This change maintains backward compatibility for existing functionality
while providing better separation of concerns between I2C bus management
and audio codec configuration.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Remove function prototypes for BMP180 pressure sensor and CS4344 audio DAC
devices that were never actually present on this board configuration. This
cleans up the header file by removing declarations for non-existent hardware.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Adds support for init script on ESP32 and ESP32-S2.
Moves the scripts of ESP32-S3 from board specific to
board common (they are the same).
Signed-off-by: Filipe Cavalcanti <filipe.cavalcanti@espressif.com>
occurring during compilation and linking phase when the configuration
(CONFIG_ESP32S3_APP_FORMAT_LEGACY=y) is enabled.
---
undefined reference to _esp_system_init_fn_array_start
undefined reference to _esp_system_init_fn_array_end
undefined reference to __init_array_start
undefined reference to __init_array_end
---
Signed-off-by: nuttxs <zhaoqing.zhang@sony.com>
Updates E-Fuse driver for ESP32S3, now sharing a common implementation across
Xtensa devices.
Signed-off-by: Filipe Cavalcanti <filipe.cavalcanti@espressif.com>
Adds SYS_STARTUP_FN which calls constructors and init functions on
common source code. Requires compatibility changes on linker script.
Signed-off-by: Filipe Cavalcanti <filipe.cavalcanti@espressif.com>
Introduce EXT1 wakeup functionality to the ESP32-S3 power management
subsystem. With this feature, the ESP32-S3 can wake up from PM_STANDBY
or PM_SLEEP when one or more RTC GPIOs trigger the EXT1 condition.
Changes include:
- Added EXT1 wakeup configuration and preparation logic in rtc code.
- Integrated EXT1 handling in pmstandby() and pmsleep().
- New board-level Kconfig options under ESP32-S3 DevKit menu:
- CONFIG_PM_EXT1_WAKEUP: enable EXT1 wakeup support
- CONFIG_PM_EXT1_WAKEUP_RTC_GPIO<n>: select RTC GPIOs as wake sources
- CONFIG_PM_EXT1_WAKEUP_TRIGGER_MODE: choose wakeup on HIGH or LOW level
- Fixing Kconfig style
- Fixing comments standard
- Adding PM documentation for esp32s3-devkit
Impact:
- No build impact unless CONFIG_PM_EXT1_WAKEUP is enabled.
- When enabled, ESP32-S3 can wake from low-power states via RTC GPIOs.
- No new public API introduced; controlled via board Kconfig.
Tested on ESP32-S3 DevKit:
- Configured GPIO4 and GPIO5 as EXT1 wake sources.
- Verified wakeup from light sleep and deep sleep on external signals.
- Wakeup reason correctly reported as EXT1.
Signed-off-by: Thiago Finelon <thiago.sfinelon@gmail.com>
- Added esp32s3_board_spislavedev.c with board-level SPI slave logic
- Added esp32s3_board_spislavedev.h public header in common/include
- Updated Make.defs to include the new source when CONFIG_SPI_SLAVE_DRIVER=y
- Adding spislv board config to esp32s3-devkit
- Adding documentation of esp32s3 devkit spi slv
- Fixing path include in esp32s3_board_spislavedev.c
- Fixing relative path in the header of esp32s3_board_spislavedev.h
- Removing neasted check in Make.defs, consistency reasons
This provides initial support for SPI slave device initialization
on ESP32-S3 boards, making the feature available under conditional
build configuration.
Signed-off-by: Thiago Finelon <thiago.sfinelon@gmail.com>
Prior to this commit, it wasn't possible to load ELF modules from
the external PSRAM. There were two main issues about it: 1) copying
data using the instruction bus was being used instead of the data
bus (this, per si, isn't a problem, but requires special attention
regarding data alignment), and 2) the cache was not being properly
cleaned and flushed to properly access the loaded data using the
instruction bus.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
If both SPI Flash support (`CONFIG_ESP32S3_SPIFLASH`) and PSRAM
(`CONFIG_ESP32S3_SPIRAM`) are enabled, the PSRAM can only be
assigned to the user's heap (`CONFIG_ESP32S3_SPIRAM_USER_HEAP`).
Additionaly, `CONFIG_ESP32S3_SPI_FLASH_SUPPORT_PSRAM_STACK` must be
set because the system will end up allocating tasks' stacks from
the external PSRAM. This has an impact when dealing with SPI flash
operations because the cache must be disabled and the running task
should not rely on any data from the PSRAM. To accomplish that, It
offloads the SPI flash operation to a work queue (which, by
definition, allocates its heap from the kernel heap).
The same (assigning the PSRAM to the user's heap) is valid when the
Wi-Fi is enabled because the lower-half driver requires data being
allocated from the internal memory (which can only be achieved by
allocating from the kernel heap when both the kernel and user heaps
exists).
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
This commit adds the missing `board_memorymap.h` file for all the
ESP32-S3's boards. This header file is necessary whenever Wi-Fi
is enabled, for instance.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
This is a supplement to the patch:1936126210a56b6d1b033d6d940669413dd6e1b0
Due to the automatic wrapping of MTD devices during the
open() process, the legacy registration methods
ftl_initialize() and bchdev_register() are no longer
required for MTD device registration for user code.
So we have adjusted the registration method for MTD devices
in nuttx/boards, replacing the previous approach using
ftl_initialize() with register_mtddriver().
When using the ILI9342C LCD on the esp32s3-box-3 development board, the
displayed colors are inverted.
add content
Manually converts the byte order of color data from little-endian
to big-endian before transmission.
1. Rotate the video screen 90 degrees right.
2. Enable touchscreen for the LVGL configuration "lckfb-szpi-esp32s3:lvgl" and add lvgldemo autostart.
Signed-off-by: wangjianyu3 <wangjianyu3@xiaomi.com>
Adds a defconfig for SDMMC over SPI to the following boards:
esp32-devkitc, esp32s2-saola-1 and esp32s3-devkit.
Renames the defconfig name for:
esp32-lyrat and esp32-wrover-kit.
Signed-off-by: Filipe Cavalcanti <filipe.cavalcanti@espressif.com>
Initializing configuration for Fastboot TCP network device.
esp32s3-devkit:fastboot : Fastboot TCP and USB transport enabled
esp32s3-devkit:fastboot_usb : Fastboot USB transport enabled only
esp32s3-devkit:fastboot_tcp : Fastboot TCP transport enabled only
Signed-off-by: wangjianyu3 <wangjianyu3@xiaomi.com>
Initializing configuration for Fastboot TCP network device.
lckfb-szpi-esp32s3:fastboot : Fastboot TCP and USB transport enabled
lckfb-szpi-esp32s3:fastboot_usb : Fastboot USB transport enabled only
lckfb-szpi-esp32s3:fastboot_tcp : Fastboot TCP transport enabled only
Signed-off-by: wangjianyu3 <wangjianyu3@xiaomi.com>
