Gregory Nutt
|
85e8117062
|
Move interrupt dispatch logic from sched/ to sched/irq
|
2014-08-08 14:31:15 -06:00 |
|
Gregory Nutt
|
39183d37b8
|
Change all time conversions. Yech. New timer units in microseconds breaks all existing logic that used milliseconds in the conversions. Something likely got broken doing this, probably because I confused a MSEC2TICK conversion with a TICK2MSEC conversion. Also, the tickless OS no appears fully functional and passes the OS test on the simulator with no errors
|
2014-08-07 18:00:38 -06:00 |
|
Gregory Nutt
|
c9661ad5a7
|
Change all time conversions. Yech. New timer units in microseconds breaks all existing logic that used milliseconds in the conversions. Something likely got broken doing this, probably because I confused a MSEC2TICK conversion with a TICK2MSEC conversion. Also, the tickless OS no appears fully functional and passes the OS test on the simulator with no errors
|
2014-08-07 18:00:38 -06:00 |
|
Gregory Nutt
|
8b2a8fceba
|
Change CONFIG_MSEC_PER_TICK to CONFIG_USEC_PER_TICK. This gives more options for system timers in general, but more importantly, let's us realize higher resolution for the case of CONFIG_SCHED_TICKLESS=y -- of course, at the risk of some new interger overvflow problems
|
2014-08-07 13:42:47 -06:00 |
|
Gregory Nutt
|
0aa7209765
|
Change CONFIG_MSEC_PER_TICK to CONFIG_USEC_PER_TICK. This gives more options for system timers in general, but more importantly, let's us realize higher resolution for the case of CONFIG_SCHED_TICKLESS=y -- of course, at the risk of some new interger overvflow problems
|
2014-08-07 13:42:47 -06:00 |
|
Gregory Nutt
|
f140e112e0
|
Implements the tickless OS
|
2014-08-07 11:39:16 -06:00 |
|
Gregory Nutt
|
520a51a3e1
|
Implements the tickless OS
|
2014-08-07 11:39:16 -06:00 |
|
Gregory Nutt
|
c275ebef35
|
Add support for a simulated interval timer support verification of the tickless OS.
|
2014-08-06 18:29:29 -06:00 |
|
Gregory Nutt
|
dc48bec019
|
Add support for a simulated interval timer support verification of the tickless OS.
|
2014-08-06 18:29:29 -06:00 |
|
Gregory Nutt
|
595ec296fb
|
Don't build in sched_processtimer.c if CONFIG_SCHED_TICKLESS is selected.
|
2014-08-06 18:27:10 -06:00 |
|
Gregory Nutt
|
cc7cb0f031
|
Don't build in sched_processtimer.c if CONFIG_SCHED_TICKLESS is selected.
|
2014-08-06 18:27:10 -06:00 |
|
Gregory Nutt
|
94afad9b70
|
if CONFIG_SCHED_TICKLESS is defined, then the global variable g_system_timer does not exist
|
2014-08-06 18:26:16 -06:00 |
|
Gregory Nutt
|
0452b1555b
|
if CONFIG_SCHED_TICKLESS is defined, then the global variable g_system_timer does not exist
|
2014-08-06 18:26:16 -06:00 |
|
Gregory Nutt
|
594083d870
|
Rename up_timerinit() to up_timer_initailize(); Add prototypes for candidate interfaces for the tickless OS; Don't build existing timer initialization logic if CONFIG_SCHED_TICKLESS is defined.
|
2014-08-06 16:26:01 -06:00 |
|
Gregory Nutt
|
736d3c169a
|
Rename up_timerinit() to up_timer_initailize(); Add prototypes for candidate interfaces for the tickless OS; Don't build existing timer initialization logic if CONFIG_SCHED_TICKLESS is defined.
|
2014-08-06 16:26:01 -06:00 |
|
Gregory Nutt
|
d4a29fcf7e
|
SAMA5D3 HSMCI: TX DMA is again disabled
|
2014-08-05 07:07:39 -06:00 |
|
Gregory Nutt
|
7b9c44101d
|
SAMA5D3 HSMCI: TX DMA is again disabled
|
2014-08-05 07:07:39 -06:00 |
|
Gregory Nutt
|
553a16fac5
|
SAMA5 PCK: Add Main clock as an option for the PCK clock source
|
2014-08-03 10:17:50 -06:00 |
|
Gregory Nutt
|
159bcc255d
|
SAMA5 PCK: Add Main clock as an option for the PCK clock source
|
2014-08-03 10:17:50 -06:00 |
|
Gregory Nutt
|
1fc8f2b06d
|
SAMA5 SSC: Verify that the requested bit width is supported. Correct some alignment tests that depend upon the data bit width.
|
2014-08-02 14:26:49 -06:00 |
|
Gregory Nutt
|
c75bf6d741
|
SAMA5 SSC: Verify that the requested bit width is supported. Correct some alignment tests that depend upon the data bit width.
|
2014-08-02 14:26:49 -06:00 |
|
Gregory Nutt
|
715cf207ea
|
SAMA5 WM8904: Fix errors in programmable clock output configuration
|
2014-08-01 15:18:58 -06:00 |
|
Gregory Nutt
|
83dab03576
|
SAMA5 WM8904: Fix errors in programmable clock output configuration
|
2014-08-01 15:18:58 -06:00 |
|
Gregory Nutt
|
5e92347d60
|
SAMA5 SSC: Start Delay is now configurable
|
2014-08-01 14:10:37 -06:00 |
|
Gregory Nutt
|
805a02965c
|
SAMA5 SSC: Start Delay is now configurable
|
2014-08-01 14:10:37 -06:00 |
|
Gregory Nutt
|
d68a6059e0
|
SAMA5 SSC: Frame Synch Delay is now configurable
|
2014-08-01 12:25:31 -06:00 |
|
Gregory Nutt
|
50bd2ba46c
|
SAMA5 SSC: Frame Synch Delay is now configurable
|
2014-08-01 12:25:31 -06:00 |
|
Gregory Nutt
|
c2c2921901
|
SAMA5D SSC: Needs to account for data offset in audio buffer.
|
2014-07-31 19:14:24 -06:00 |
|
Gregory Nutt
|
0b4090df0d
|
SAMA5D SSC: Needs to account for data offset in audio buffer.
|
2014-07-31 19:14:24 -06:00 |
|
Gregory Nutt
|
513329fd24
|
SAMA5D3X-EK: Add support for the WM8904 audio CODEC
|
2014-07-31 11:14:57 -06:00 |
|
Gregory Nutt
|
c657139b30
|
SAMA5D3X-EK: Add support for the WM8904 audio CODEC
|
2014-07-31 11:14:57 -06:00 |
|
Gregory Nutt
|
ffcc0b8da3
|
SAMA5: Changes needed for a clean SAMA5D3 build after all of the recent SAMA5D4 changes.
|
2014-07-31 11:09:56 -06:00 |
|
Gregory Nutt
|
24af676c05
|
SAMA5: Changes needed for a clean SAMA5D3 build after all of the recent SAMA5D4 changes.
|
2014-07-31 11:09:56 -06:00 |
|
Gregory Nutt
|
c0c4cda763
|
SAMA5 HSMCI: e-enable TX DMA and verify that DMA writes to the SD card are functional. They are so now TX DMA is re-enabled in the driver. This might affect the SAMA5D3 platforms where the TX DMA problem was found. The SAMA4D3 and 4 use the same HSMCI driver. Much has change since then and it is not surprising that DMA is now functional. However, the has not be re-verified on the SAMA5D3 which has a different DMA controller.
|
2014-07-30 11:20:06 -06:00 |
|
Gregory Nutt
|
276cc44878
|
SAMA5 HSMCI: e-enable TX DMA and verify that DMA writes to the SD card are functional. They are so now TX DMA is re-enabled in the driver. This might affect the SAMA5D3 platforms where the TX DMA problem was found. The SAMA4D3 and 4 use the same HSMCI driver. Much has change since then and it is not surprising that DMA is now functional. However, the has not be re-verified on the SAMA5D3 which has a different DMA controller.
|
2014-07-30 11:20:06 -06:00 |
|
Gregory Nutt
|
611ea42dbf
|
SAMA5D HSMCI: Fix a problem on card insertion/removal callback handling. Interrupts were being disable so that the callbacks occurred with interrupts disabled. This resulted in loss of some interrupts and some not-so-good behaviors. The solution is to perform all callbacks on the work thread unconditionally (2014-7-29).
|
2014-07-30 10:19:41 -06:00 |
|
Gregory Nutt
|
4df0fbec04
|
SAMA5D HSMCI: Fix a problem on card insertion/removal callback handling. Interrupts were being disable so that the callbacks occurred with interrupts disabled. This resulted in loss of some interrupts and some not-so-good behaviors. The solution is to perform all callbacks on the work thread unconditionally (2014-7-29).
|
2014-07-30 10:19:41 -06:00 |
|
Gregory Nutt
|
059812c872
|
SAMA5D HSMCI: Add method to do RX transfer without DMA. The 8-byte SCR transfer was failing silently with the DMA transfer, leaving the SD card in single bit mode
|
2014-07-29 21:13:28 -06:00 |
|
Gregory Nutt
|
70be3bae16
|
SAMA5D HSMCI: Add method to do RX transfer without DMA. The 8-byte SCR transfer was failing silently with the DMA transfer, leaving the SD card in single bit mode
|
2014-07-29 21:13:28 -06:00 |
|
Gregory Nutt
|
8bbbc5b255
|
Cosmetic changes to comments
|
2014-07-29 07:17:01 -06:00 |
|
Gregory Nutt
|
2861636015
|
Cosmetic changes to comments
|
2014-07-29 07:17:01 -06:00 |
|
Gregory Nutt
|
e053158f95
|
SAMA5D-EK: Correct system timer frequency. Input clock is MCK/2, not MCK
|
2014-07-29 07:12:36 -06:00 |
|
Gregory Nutt
|
53930d5531
|
SAMA5D-EK: Correct system timer frequency. Input clock is MCK/2, not MCK
|
2014-07-29 07:12:36 -06:00 |
|
Gregory Nutt
|
29ea8ab0e4
|
Cosmetic changes to comments
|
2014-07-29 07:11:16 -06:00 |
|
Gregory Nutt
|
1b6eec572d
|
Cosmetic changes to comments
|
2014-07-29 07:11:16 -06:00 |
|
Gregory Nutt
|
42a975af74
|
Fixes to last SAMA5 PMIC checkin
|
2014-07-28 17:09:37 -06:00 |
|
Gregory Nutt
|
8c2b458d75
|
Fixes to last SAMA5 PMIC checkin
|
2014-07-28 17:09:37 -06:00 |
|
Gregory Nutt
|
99927e918d
|
LPC17xx: DC updates from Max. Also fixes some syntax errors that I introduced in the last commit.
|
2014-07-28 07:23:49 -06:00 |
|
Gregory Nutt
|
d450993f2e
|
LPC17xx: DC updates from Max. Also fixes some syntax errors that I introduced in the last commit.
|
2014-07-28 07:23:49 -06:00 |
|
Gregory Nutt
|
dd4be66f1c
|
ARM: Move L2 cache initialization to much later in the sequence
|
2014-07-27 10:03:33 -06:00 |
|