Now that time_t is unconditionally 64-bit (signed int64_t) and the
struct timespec fields tv_sec / tv_nsec are wide enough on their own,
the explicit (uint64_t)/(int64_t)/(int) casts that used to guard the
multiplications and subtractions in *_us / *_ms / *_ns helpers are no
longer needed. Drop them to keep the timekeeping math readable and
consistent with the previous sclock_t/time_t cleanup.
In the same spirit, this commit also:
* Normalises the printf-style format specifiers and casts used to
print tv_sec / tv_nsec / tv_usec values across arch/, drivers/,
fs/, sched/ and libs/. The prior code was a mix of
"%d"/"%u"/"%ld"/"%lu"/"%lld"/PRIu32/PRIu64 with matching
(int)/(unsigned long)/(long long)/PRIu* casts; some formats
truncated time_t on 32-bit hosts, others mismatched signedness or
width. Replace all such cases with the portable POSIX-recommended
forms:
- tv_sec (time_t, signed, impl-defined width) -> %jd + (intmax_t)
- tv_nsec (long, signed) -> %ld (no cast)
- tv_usec (suseconds_t / long) -> %ld (no cast)
Add #include <stdint.h> where required.
* Drops a few stale `(FAR const time_t *)&ts.tv_sec` casts and
related `(FAR struct tm *)` / `(const time_t *)` casts in
gmtime_r() / localtime_r() / gmtime() callers; ts.tv_sec is plain
time_t now and the casts only obscured the type.
* Fixes one overflow in fs/procfs/fs_procfscritmon.c where
all_time.tv_sec * 1000000 could overflow on 32-bit time_t before
being multiplied again; cast to uint64_t at the start.
No behavioural change.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
POSIX leaves the signedness of time_t and clock_t unspecified, but
mainstream implementations (Linux glibc/musl, the BSDs, macOS, RTEMS,
Zephyr's POSIX layer, Windows _time64) expose time_t as signed 64-bit.
NuttX has historically used uint64_t only because it was tied to the
CONFIG_SYSTEM_TIME64 knob; with that gone, switch:
time_t : uint64_t -> int64_t
clock_t : uint64_t -> int64_t
CLOCK_MAX: UINT64_MAX -> INT64_MAX
This lets (time_t)-1 sentinels, negative tick deltas, and host-side
headers behave as on every other POSIX system without source churn.
Headers updated:
- include/sys/types.h, include/limits.h, include/nuttx/clock.h
- include/nuttx/fs/hostfs.h (nuttx_time_t alias)
- include/nuttx/{mqueue.h,wdog.h,wqueue.h,timers/clkcnt.h}
Because clock_t is now signed 64-bit, the NuttX-internal sclock_t
alias becomes redundant: every sclock_t/SCLOCK_MAX use is folded
back to clock_t/CLOCK_MAX (notably in sched/wdog, sched/mqueue,
sched/sched, sched/clock, sched/timer, libs/libc/time, fs/vfs and
the drivers/arch consumers below).
Tick/period constants (NSEC_PER_SEC, USEC_PER_SEC, MSEC_PER_SEC,
SEC_PER_MIN, ...) in include/nuttx/clock.h are retyped from "long"
literals to INT64_C(...) so that 64-bit arithmetic no longer
depends on the host's long width.
Strip now-redundant (time_t)/(clock_t)/(unsigned long) casts and
unsigned-only branches across the tree:
- arch RTC / oneshot / tickless lowerhalfs:
arm: cxd56xx, efm32, imxrt, lc823450, max326xx, sam34, sama5,
samd5e5, samv7, stm32, stm32f7, stm32h7, stm32l4, stm32wb,
xmc4
mips: pic32mz sparc: bm3803 x86_64: intel64
risc-v/xtensa: espressif (esp_i2c[_slave], esp_rtc,
esp32c3{_i2c,_rtc,_wifi_adapter}, esp32{,s2,s3}_*),
mpfs_perf
- drivers: audio/tone, input/aw86225, power/pm/{activity,
stability}_governor, rpmsg/rpmsg_ping,
timers/{ds3231,mcp794xx,pcf85263,rx8010},
wireless/ieee80211/bcm43xxx, wireless/spirit/spirit_spi
- core: fs/vfs/{fs_poll,fs_timerfd}, mm/iob/iob_alloc,
libs/libc/{netdb/lib_dnscache,time/{lib_calendar2utc,
lib_time}}, net/icmp/icmp_pmtu, net/icmpv6/icmpv6_pmtu,
net/ipfrag, net/tcp/{tcp.h,tcp_timer},
net/utils/net_snoop, net/mld/mld_query (drop the now-dead
mld_mrc2mrd helper since signed math handles it directly),
sched/clock/{clock,clock_initialize},
sched/sched/{sched_profil,sched_setparam,sched_setscheduler},
sched/pthread/pthread_create,
sched/wdog/{wd_gettime,wd_start,wdog.h},
sched/timer/timer_gettime, sched/mqueue/*
Flip the few in-tree printf format strings that assumed an
unsigned 64-bit tv_sec:
* drivers/rpmsg/rpmsg_ping.c PRIu64 -> PRId64
* arch/xtensa/src/esp32{,s2,s3}/esp32*_oneshot_lowerhalf.c
PRIu32 (already wrong) -> PRId64
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
The 32-bit system clock has a limited range (~497 days) and the
configuration knob is no longer worth the complexity given that
practically every modern target already enables it. Make 64-bit
time_t/clock_t/sclock_t/nuttx_time_t the only supported flavor.
Specifically:
- Drop the SYSTEM_TIME64 Kconfig option and its dependent
PERF_OVERFLOW_CORRECTION/HRTIMER guards in sched/Kconfig.
- Remove every #ifdef CONFIG_SYSTEM_TIME64 branch in headers
(include/{sys/types.h,limits.h,inttypes.h,nuttx/clock.h,
nuttx/fs/hostfs.h}) and core code paths
(sched/clock/clock.h, drivers/power/pm/pm_procfs.c,
drivers/rpmsg/rpmsg_ping.c, fs/procfs/fs_procfsuptime.c,
libs/libc/wqueue/work_usrthread.c,
arch/avr/src/avrdx/avrdx_timerisr_tickless_alarm.c).
- Strip CONFIG_SYSTEM_TIME64=y from every board defconfig.
- Update Documentation/guides/rust.rst accordingly.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Nuttx currently has 2 types of sleep interfaces:
1. Signal-scheduled sleep: nxsig_sleep() / nxsig_usleep() / nxsig_nanosleep()
Weaknesses:
a. Signal-dependent: The signal-scheduled sleep method is bound to the signal framework, while some driver sleep operations do not depend on signals.
b. Timespec conversion: Signal-scheduled sleep involves timespec conversion, which has a significant impact on performance.
2. Busy sleep: up_mdelay() / up_udelay()
Weaknesses:
a. Does not actively trigger scheduling, occupy the CPU loading.
3. New interfaces: Scheduled sleep: nxsched_sleep() / nxsched_usleep() / nxsched_msleep() / nxsched_ticksleep()
Strengths:
a. Does not depend on the signal framework.
b. Tick-based, without additional computational overhead.
Currently, the Nuttx driver framework extensively uses nxsig_* interfaces. However, the driver does not need to rely on signals or timespec conversion.
Therefore, a new set of APIs is added to reduce dependencies on other modules.
(This PR also aims to make signals optional, further reducing the code size of Nuttx.)
Signed-off-by: chao an <anchao.archer@bytedance.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Use bit mask method to represent the command, because it's more
convenient to express multiple characteristics simultaneously.
Signed-off-by: Yongrong Wang <wangyongrong@xiaomi.com>
Usually rpmsg ping logs are needed during testing,
but too many other module logs can easily overwrite it,
so improve the rpmsg ping log level, later we can setlogmask to
a higher log level to mask other modules' logs.
Signed-off-by: Yongrong Wang <wangyongrong@xiaomi.com>
since clock_t may map to either 32-bit or 64-bit integer type,
UINT_MAX may not be the maximum value of clock_t.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
rpmsg_ping.c is blocking CI checks for RPTUN related patches like #11673.
this patch simply fix the compilation issue of rpmsg_ping.c:
- line 191: overflow conversion from "long unsigned int" to "unsigned int"
- line 226: "sendlen" used uninitialized
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
It should be possible to use ping without rptun being enabled, so striped rptun_ping out of rptun and rename to rpmsg_ping.
Signed-off-by: wangyongrong <wangyongrong@xiaomi.com>
2024-01-30 04:08:59 -08:00
Renamed from drivers/rptun/rptun_ping.c (Browse further)
