d584142cf4
Add a P0 skeleton port for the Realtek RTL8721F (SDK codename Green2 /
amebagreen2). Structurally the RTL8721F is a twin of the RTL8720F -- the
AP/host core is km4tz (ARMv8-M.main, TrustZone secure) and the WiFi MAC/PHY
runs on the km4ns network-processor core -- so this port is modelled on the
RTL8720F one and shares the IC-agnostic ameba glue in
arch/arm/src/common/ameba.
This is the "configures and links" skeleton (rtl8721f_evb:nsh builds an
image end to end). Four differences from the RTL8720F template were needed
to make the empty shell link against amebagreen2:
* km4tz has no FPU (cmsis_cpu.h defines __FPU_PRESENT 0), so the chip does
not select ARCH_HAVE_FPU and the image is built soft-float.
* ameba_app_start.c matches amebagreen2's ram_km4tz silicon init: the
nocache MPU map, the non-secure ROM BSS clear, OSC4M (not OSC2M)
calibration gated on EFUSE cut >= B and CHIP_TYPE_ASIC_POSTSIM.
* amebagreen2 ships no lib_rom.a, so the ROM archive whole-archive link is
dropped; the WiFi/OS/non-secure ROM symbols come from the SDK
ameba_rom_symbol_acut{,_wifi,_os}.ld maps appended to the image2 linker
script, exactly as green2's own image2 link does.
* the AP WiFi security lib is lib_wifi_common.a (was lib_wifi_com_sec.a).
The per-chip IRQ vector table (irq.h) and the RAM_START/RAM_SIZE layout
still carry RTL8720F values and are refined in the follow-up bring-up work.
Signed-off-by: dechao_gong <dechao_gong@realsil.com.cn>
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
|
||
|---|---|---|
| .github | ||
| arch | ||
| audio | ||
| binfmt | ||
| boards | ||
| cmake | ||
| crypto | ||
| Documentation | ||
| drivers | ||
| dummy | ||
| fs | ||
| graphics | ||
| include | ||
| libs | ||
| mm | ||
| net | ||
| openamp | ||
| pass1 | ||
| sched | ||
| syscall | ||
| tools | ||
| video | ||
| wireless | ||
| .asf.yaml | ||
| .codespell-ignore-lines | ||
| .codespellrc | ||
| .editorconfig | ||
| .gitignore | ||
| .gitmessage | ||
| .pre-commit-config.yaml | ||
| .yamllint | ||
| AUTHORS | ||
| CMakeLists.txt | ||
| CONTRIBUTING.md | ||
| INVIOLABLES.md | ||
| Kconfig | ||
| LICENSE | ||
| Makefile | ||
| NOTICE | ||
| README.md | ||
| ReleaseNotes | ||
Apache NuttX is a real-time operating system (RTOS) with an emphasis on standards compliance and small footprint. Scalable from 8-bit to 64-bit microcontroller environments, the primary governing standards in NuttX are POSIX and ANSI standards. Additional standard APIs from Unix and other common RTOSs (such as VxWorks) are adopted for functionality not available under these standards, or for functionality that is not appropriate for deeply-embedded environments (such as fork()).
For brevity, many parts of the documentation will refer to Apache NuttX as simply NuttX.
Getting Started
First time on NuttX? Read the Getting Started guide! If you don't have a board available, NuttX has its own simulator that you can run on terminal.
Documentation
You can find the current NuttX documentation on the Documentation Page.
Alternatively, you can build the documentation yourself by following the Documentation Build Instructions.
The old NuttX documentation is still available in the Apache wiki.
Supported Boards
NuttX supports a wide variety of platforms. See the full list on the Supported Platforms page.
Contributing
If you wish to contribute to the NuttX project, read the Contributing guidelines for information on Git usage, coding standard, workflow and the NuttX principles.
License
The code in this repository is under either the Apache 2 license, or a license compatible with the Apache 2 license. See the License Page for more information.