mirror of
https://github.com/apache/nuttx.git
synced 2026-10-24 07:18:45 +00:00
c36e45eb6f
Wire the RTL8721F (amebagreen2) into the shared Ameba timer driver (arch/arm/src/common/ameba/ameba_timer.c), registered at /dev/timer0 (TIM1) and /dev/timer1 (TIM2). Only the per-chip base addresses, RCC masks and IRQs differ, so this adds a small ameba_timer_chip.h (the two 32-bit basic LTIM timers at 0x40819200 / 0x40819400, 32.768 kHz, APBPeriph_LTIM1/2, IRQ_TIMER1/2, verified against the SoC hal_platform.h / sysreg_lsys.h / vector table) plus the Make.defs/CMakeLists build hooks, the fwlib ram_common/ameba_tim.c RAM source (now also pulled in by CONFIG_AMEBA_TIMER, matching the PWM rule), the board bring-up registration and a timer defconfig. The shared driver is unchanged. TIM0 is left untouched because the boot ROM claims it as the always-on system timer; reprogramming it would break every SDK delay. Assisted-by: Claude <noreply@anthropic.com> Signed-off-by: dechao_gong <dechao_gong@realsil.com.cn> |
||
|---|---|---|
| .. | ||
| arm | ||
| arm64 | ||
| avr | ||
| dummy | ||
| hc/m9s12 | ||
| mips | ||
| misoc/lm32/misoc | ||
| or1k/mor1kx/or1k | ||
| renesas | ||
| risc-v | ||
| sim/sim/sim | ||
| sparc | ||
| tricore | ||
| x86/qemu/qemu-i486 | ||
| x86_64/qemu/qemu-intel64 | ||
| xtensa | ||
| z16/z16f/z16f2800100zcog | ||
| z80 | ||
| .gitignore | ||
| Board.mk | ||
| boardctl.c | ||
| CMakeLists.txt | ||
| dummy.c | ||
| Kconfig | ||
| Makefile | ||