Aksal/nuttx
3
1
Fork 1
mirror of https://github.com/apache/nuttx.git synced 2026-08-07 13:37:18 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions 2
nuttx/arch/arm/src/samv7
History
Michael Spahlinger 329c760f17 SAMV7: CAN Message Filtering fixed 
- Bugfix: stdfilters didn't work because the filter was never enabled (wrong number of bits to shift)
 - Bugfix: Filters were never used because the configuration register cannot be written without using the initialization mode

Both bugs are fixed by this patch. Filtering has been tested with both standard and extended identifiers and is now working properly.
2016-06-29 08:48:11 -06:00
..
chip SAMV7: CAN Message Filtering fixed 2016-06-29 08:48:11 -06:00
chip.h SAMV7 EMAC: Fix alignment issue: RX buffers need to be invalidated. This means the alignment of buffers must be at least to the data cache line size at both ends of the buffer 2015-03-28 13:09:01 -06:00
Kconfig TWIHS Driver improved and GPIO-Driver fixed for Open-Drain Pins 2016-06-24 10:33:51 -06:00
Make.defs Add the up_systemreset interface to the samv7 arch. The approach is slightly different in that: 1) It enables ARCH_HAVE_RESET and allows the user to set if, and for how long, to drive External nRST signal. It also does not contain a default board_reset, as that really should be done in the config's src if CONFIG_BOARDCTL_RESET is defined. 2016-05-23 17:05:02 -06:00
sam_allocateheap.c Rename board_led_on to board_autoled_on 2015-11-01 09:07:06 -06:00
sam_clockconfig.c SAMV71 and SAME70: Place the Main Oscillator Enable in the board.h 2016-03-04 12:31:54 -06:00
sam_clockconfig.h SAMV7 USB: USB must be enabled before PMC 480MHz clock is enabled 2015-08-11 15:48:26 -06:00
sam_config.h Remove CONFIG_USARTn_ISUART 2016-05-25 11:21:48 -06:00
sam_emac.c Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info(). 2016-06-20 11:59:15 -06:00
sam_ethernet.c Without lowsyslog() *llerr() is not useful. Eliminate and replace with *err(). 2016-06-20 12:44:38 -06:00
sam_ethernet.h SAMV7: Add a sneak internal interface that will allow us to set the MAC address before NSH even starts 2015-03-18 17:23:40 -06:00
sam_freerun.c Centralize definitions associated with CONFIG_DEBUG_TIMER 2016-06-16 07:16:25 -06:00
sam_freerun.h SAM3/4, SAMA5, SAMv7 Tickless: Refuse to call lower-level timer logic if not yet initialized 2016-02-05 10:22:11 -06:00
sam_gpio.c TWIHS Driver improved and GPIO-Driver fixed for Open-Drain Pins 2016-06-24 10:33:51 -06:00
sam_gpio.h Centralize definitions associated with CONFIG_DEBUG_GPIO 2016-06-15 09:20:23 -06:00
sam_gpioirq.c Correct some spacing issues 2015-10-07 11:39:06 -06:00
sam_hsmci.c Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info(). 2016-06-20 11:59:15 -06:00
sam_hsmci.h Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
sam_hsmci_clkdiv.c Remove executable flag from more .c and .h files 2015-04-09 08:20:57 -06:00
sam_irq.c Fix another victim of the mass name changes: xyz_errmonitor->xyz_dbgmonitor 2016-06-17 07:00:33 -06:00
sam_lowputc.c Backing out part of last commit 2016-05-19 15:46:07 -06:00
sam_lowputc.h Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
sam_mcan.c SAMV7: CAN Message Filtering fixed 2016-06-29 08:48:11 -06:00
sam_mcan.h Standardize the width of all comment boxes in header files 2015-10-02 17:47:23 -06:00
sam_mpuinit.c Rename CONFIG_ARMV7M_MPU to CONFIG_ARM_MPU so that we can reuse the configuration settings for the ARMV7R MPU 2015-12-14 13:56:21 -06:00
sam_mpuinit.h Rename CONFIG_ARMV7M_MPU to CONFIG_ARM_MPU so that we can reuse the configuration settings for the ARMV7R MPU 2015-12-14 13:56:21 -06:00
sam_oneshot.c Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info(). 2016-06-20 11:59:15 -06:00
sam_oneshot.h Cosmetic fix to spacing 2016-05-29 08:25:05 -06:00
sam_pck.c Add _ to the beginning of all debug macros to avoid name collisions 2016-06-16 12:33:32 -06:00
sam_pck.h SAMV7: Extend programmable clock support for queries about the PCK configuration 2015-12-03 14:11:39 -06:00
sam_periphclks.h arch/arm/src/samv7: Add SAME70 memory map 2015-11-14 12:01:28 -06:00
sam_progmem.c arch/arm/src/samv7: Add SAME70 memory map 2015-11-14 12:01:28 -06:00
sam_progmem.h SAMV7 flash logic is complete, uncompiled, and untested 2015-11-12 10:46:59 -06:00
sam_qspi.c Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info(). 2016-06-20 11:59:15 -06:00
sam_qspi.h SAMV71 QSPI: Use new QSPI interface. Can't use SPI interface as planned; the hardware architectue is too different 2015-08-25 15:23:59 -06:00
sam_rswdt.c Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info(). 2016-06-20 11:59:15 -06:00
sam_serial.c Remove CONFIG_USARTn_ISUART 2016-05-25 11:21:48 -06:00
sam_spi.c Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info(). 2016-06-20 11:59:15 -06:00
sam_spi.h SAMV7 SPI: Revise support for Peripheral Chip Select Decoding to address up to 15 slaved 2016-02-25 08:13:33 -06:00
sam_spi_slave.c Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info(). 2016-06-20 11:59:15 -06:00
sam_ssc.c Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info(). 2016-06-20 11:59:15 -06:00
sam_ssc.h SAMV71: Quick'n'dirty port of the SAMA5 SSC driver to the SAM7. The IP is compatible but there are still some DMA- and Cache-related issues that need to be worked out. 2015-03-12 16:00:38 -06:00
sam_start.c Fix build if the config is not updated 2016-05-19 12:44:58 -10:00
sam_start.h Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
sam_systemreset.c Restore PR. I have no idea where it went. 2016-05-23 17:45:15 -06:00
sam_tc.c Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info(). 2016-06-20 11:59:15 -06:00
sam_tc.h Centralize definitions associated with CONFIG_DEBUG_TIMER 2016-06-16 07:16:25 -06:00
sam_tickless.c Without lowsyslog() *llerr() is not useful. Eliminate and replace with *err(). 2016-06-20 12:44:38 -06:00
sam_timerisr.c Costmetic fixes to C coding style 2015-10-05 17:13:53 -06:00
sam_trng.c Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err() 2016-06-11 15:50:49 -06:00
sam_trng.h SAMV7: Port SAMAD5 TRNG driver to the SAMV7 2015-12-06 08:53:31 -06:00
sam_twihs.c Fix a warning about an unused label, errout: Use bool with true/false, not uint8_t with 1/0 2016-06-28 14:55:04 -06:00
sam_twihs.h Rename up_i2c initialize and uninitialize functions using the correct MCU-specific naming 2016-02-02 12:08:23 -06:00
sam_usbdev.h SAMV7: A little more USB-related stuff 2015-03-21 08:54:01 -06:00
sam_usbdevhs.c Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info(). 2016-06-20 11:59:15 -06:00
sam_userspace.c SAMV7 protected mode: Don't enable D-Cache until userspace data has been initialized 2015-11-07 09:35:23 -06:00
sam_userspace.h Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
sam_wdt.c Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info(). 2016-06-20 11:59:15 -06:00
sam_wdt.h SAM WDT: Rename up_wdginitialize() functions to something more appropriate for the internal OS interface. 2016-05-18 19:47:48 -06:00
sam_xdmac.c Missed a few *llinfo() to *info() conversions 2016-06-20 16:24:09 -06:00
sam_xdmac.h Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred. 2016-06-16 15:10:57 -06:00
same70_periphclks.h arch/arm/src/samv7: Add SAME70 memory map 2015-11-14 12:01:28 -06:00
samv71_periphclks.h arch/arm/src/samv7: Add support for SAME70 peripheral clocks 2015-11-14 11:41:53 -06:00