mirror of
https://github.com/apache/nuttx.git
synced 2026-08-02 12:49:00 +00:00
25876e327e
For AVR, atomic functions generated by LOAD macro turn into load surrounded by up_irq_save and up_irq_restore. The generated code was incorrect as can be seen from disassembly of __atomic_load_4: in r18, 0x3f ; store interrupts enabled flag cli ; disable interrupts out 0x3f, r18 ; restore the flag movw r30, r24 ; copy parameter (address) to pointer register ld r22, Z ; indirect load to return value registers ldd r23, Z+1 ldd r24, Z+2 ldd r25, Z+3 ret ; return The interrupts are disabled to be immediately re-enabled, the load only takes place after that. Both up_irq_save and up_irq_restore are defined in inline assembly. Other architectures (x86/486, Risc-V) mark this assembly with clobbers: memory. Doing the same thing for AVR alleviates the problem: in r18, 0x3f ; store interrupts enabled flag cli ; disable interrupts movw r30, r24 ; copy address ld r22, Z ; load ldd r23, Z+1 ldd r24, Z+2 ldd r25, Z+3 out 0x3f, r18 ; restore interrupts enabled flag ret ; return Besides compiling the code and checking the assembly, this was tested with a custom stress application on AVR128DA28. Assembly of up_irq_enable is marked in the same way with regards to clobbers. This patch also removes two functions that are not called from anywhere (up_irq_disabled, putsreg) Signed-off-by: Kerogit <kr.git@kerogit.eu> |
||
|---|---|---|
| .. | ||
| at32uc3 | ||
| at90usb | ||
| atmega | ||
| avr | ||
| avr32 | ||
| avrdx | ||
| xmega | ||
| .gitignore | ||
| arch.h | ||
| debug.h | ||
| inttypes.h | ||
| irq.h | ||
| limits.h | ||
| syscall.h | ||
| types.h | ||