zhanghongyu 097dd84bba drivers/usbdev/cdcecm.c: fix cdcecm netdev can not enter running state ... When the setinterface interface is called, it indicates that the underlying USB link has been successfully established. At this point, the status of the network card needs to be updated to RUNNING by calling the netdev_carrier_on interface. It is similar to the logic after a Wi-Fi network card is connected to a hotspot. Otherwise, an incorrect network card status may cause packets to fail to be successfully sent. Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>		2025-12-15 11:14:20 -03:00
..
1wire	drivers/1wire/1wire_ds2xxx.h: add the driver for DS2XXX eeproms.	2025-10-10 08:55:45 +02:00
aie
analog	sched/sleep: replace all Signal-based sleep implement to Scheduled sleep	2025-10-17 14:05:02 +08:00
audio	timers/oneshot: Remove all callback and args.	2025-11-18 13:02:29 +01:00
bch
can	drivers/can/can.c: fix broken O_NONBLOCK	2025-12-14 15:42:35 -05:00
clk
contactless	sched/sleep: replace all Signal-based sleep implement to Scheduled sleep	2025-10-17 14:05:02 +08:00
coresight
crypto	sched/sleep: replace all Signal-based sleep implement to Scheduled sleep	2025-10-17 14:05:02 +08:00
devicetree
dma
dummy
eeprom	eeprom/spi_xx25xx: Add IOCTL to set Block Protect	2025-12-13 13:33:48 +08:00
efuse
i2c
i2s	drivers/i2s/i2schar: Implement blocking read/write operations	2025-08-27 11:07:05 +08:00
i3c	Revert: "drivers/i3c: remove extra i3c_dev_register, do_daa has created them"	2025-12-09 08:23:46 -03:00
input	sched/sleep: replace all Signal-based sleep implement to Scheduled sleep	2025-10-17 14:05:02 +08:00
ioexpander	drivers/ioexpander/aw9523b: New driver for AW9523B i/o expander	2025-08-29 09:10:50 -03:00
ipcc
lcd	lcd/ili9341: Improve initialization	2025-12-10 23:54:44 +08:00
leds	sched/sleep: replace all Signal-based sleep implement to Scheduled sleep	2025-10-17 14:05:02 +08:00
loop
math
misc	rpmsgdev: fix export null issue when rpmsgdev init	2025-12-12 17:48:43 +08:00
mmcsd	drivers/mmcsd: Aligned Cmake with Make	2025-12-09 14:25:40 -03:00
modem	sched/sleep: replace all Signal-based sleep implement to Scheduled sleep	2025-10-17 14:05:02 +08:00
motor	sched/sleep: replace all Signal-based sleep implement to Scheduled sleep	2025-10-17 14:05:02 +08:00
mtd	drivers/mtd/w25: support custom SPI transfers delay	2025-11-27 22:27:40 +08:00
net	netdev_upperhalf: convert Kconfig to variable	2025-12-14 10:01:22 +08:00
note	drivers/note: Optimize code logic.	2025-12-10 14:58:29 +08:00
pci	drivers/pci: fix arm32 build warning	2025-12-01 14:38:02 +01:00
pinctrl
pipes
power	drivers/battery: fix race condition in event handling	2025-12-15 17:35:11 +08:00
rc
regmap
reset
rf
rmt
rpmsg	sched/sleep: replace all Signal-based sleep implement to Scheduled sleep	2025-10-17 14:05:02 +08:00
rptun
segger
sensors	drivers/sensors: Add QST QMI8658 6-axis IMU sensor support	2025-11-30 09:44:43 -03:00
serial	uart_pl011: "pl011_irq_tx_ready" and "pl011_txready" is reversed.	2025-11-10 14:15:19 +08:00
spi	sched/sleep: replace all Signal-based sleep implement to Scheduled sleep	2025-10-17 14:05:02 +08:00
syslog	Documentation: Add description for early_syslog()	2025-10-31 08:29:17 -03:00
thermal
timers	drivers/timers/arch_alarm: Revert removal of ndelay_accurate	2025-11-25 22:33:48 +08:00
usbdev	drivers/usbdev/cdcecm.c: fix cdcecm netdev can not enter running state	2025-12-15 11:14:20 -03:00
usbhost	usbhost: cdcacm exit wq after copy all received data	2025-12-14 10:37:53 -03:00
usbmisc	sched/sleep: replace all Signal-based sleep implement to Scheduled sleep	2025-10-17 14:05:02 +08:00
usbmonitor	sched/sleep: replace all Signal-based sleep implement to Scheduled sleep	2025-10-17 14:05:02 +08:00
usrsock
vhost
video	sched/sleep: replace all Signal-based sleep implement to Scheduled sleep	2025-10-17 14:05:02 +08:00
virtio
wireless	drivers/lpwan: Fix Kconfig SX1276 and SX1262 position	2025-12-08 10:39:11 +08:00
.gitignore
CMakeLists.txt
drivers_initialize.c
Kconfig
Makefile