mirror of
https://github.com/apache/nuttx.git
synced 2026-08-27 12:20:46 +00:00
7bda3b7c8b
- The frequency step was truncated to 61 Hz, while it is FXOSC/(2**19), about 61.035 Hz. The error puts a 915 MHz channel more than 500 kHz away from the requested frequency, outside its own bandwidth. - The low or high frequency front end was left at its reset value, so a board wired for 868 or 915 MHz neither transmitted nor received. - sx127x_rx_watchdog() is only used by the FSK and OOK path but was compiled whenever receive support was on, so a LoRa only configuration failed to build with -Werror. nrf52840-dk:sx127x is such a configuration. Adds the sync word, the default bandwidth and the default spreading factor as configuration options, all defaulting to the previous behaviour, and a page for the driver under components/drivers. Assisted-by: Claude Code 4.8 Signed-off-by: Jorge Guzman <jorge.gzm@gmail.com> |
||
|---|---|---|
| .. | ||
| arm | ||
| arm64 | ||
| avr | ||
| ceva | ||
| hc | ||
| mips | ||
| misco | ||
| or1k | ||
| renesas | ||
| risc-v | ||
| sim | ||
| sparc | ||
| tricore | ||
| x86 | ||
| x86_64 | ||
| xtensa | ||
| z16 | ||
| z80 | ||
| index.rst | ||