f6ecf80ebb
The documentation grew one page at a time, so the tree follows the
history of who wrote what and not the shape of NuttX. Scheduling is
spread over three places, a driver page can sit above the subsystem
that owns it, and the front page lists everything at the same level.
That is a lot to face when all you want to know is where the scheduler
lives.
This change files every page under the code it describes. It is a move,
not a rewrite: outside the ten pages named below, every page keeps the
text that is already in master, and no page's text is deleted.
What it does:
* Groups the table of contents into nine chapters.
* Moves the OS subsystems under os/: scheduling, memory, drivers,
filesystem, networking, IPC, interrupts, libs, time.
* Renames the platform pages to the names the source tree uses, and
derives their tags from the tree instead of by hand.
* Splits guides/ by subject.
* Adds Documentation/redirects.py, with a rule for every page that left
its old path, so old URLs keep working. The redirect page also carries
a link's #anchor across to the new page.
Ten pages have text that is new or rewritten. Nine of them are the
landing page of a chapter, which has to exist for the new structure:
index the front page
os/index OS Design
os/scheduling/index Scheduling
os/interrupts/index Interrupts
os/ipc/index IPC
os/time/index Time and timers
about/index About
developing/index Developing NuttX
ReleaseNotes/index Release notes
The tenth is os/libs/libbuiltin, the only page here with technical
content: libs/libbuiltin/ had no page at all. Five SVG diagrams come
with these pages, hand-written XML with no editor metadata.
Nothing outside Documentation/ is touched.
How it was checked:
* Sphinx builds with -W: no warnings, and no document left outside a
toctree.
* A script, offered in the PR, proves the narrow claim this rests on.
For every page outside the ten named above it erases what a move
touches -- link target, path, tag line, toctree block, table border --
from the whole old text and the whole new text, and requires the two
to be byte for byte identical. It also requires every sentence of a
deleted page to turn up somewhere, and every page that left its old
path to have a redirect, from a URL that existed, to where its content
went. It exits non-zero and names the page if any of that is not true,
and it tests added pages too, so forgetting to declare one cannot make
it pass.
* An independent audit checked 133 factual claims on these ten pages
against the tree, one shell command per claim: 130 confirmed, 1
refuted and fixed here, 2 not checkable.
* tools/checkpatch.sh is clean over the range.
The diff is large because moving a page changes every link that points
to it. Most of it is pure renames, and board pages that gained one tag
line.
Assisted-by: Claude:claude-opus-5
897 B
NuttX-0.4.8
This is the 40th release of NuttX. This release adds:
-
Support for the Olimex STRP711 board. That board is based on the STMicro STR711 MCU (ARM7TDMI). Integration is complete on the basic port (boot logic, system time, serial console). Two configurations have been verified: (1) The board boots and passes the OS test with console output visible on UART0, and the NuttShell (NSH) is fully functional with interrupt driven serial console. An SPI driver is available but untested (because the Olimex card slot appears to accept only MMC cards; I have only SD cards). Additional needed: USB and driver, MMC integration.
-
Support for the CodeSourcery and devkitARM Windows-native GNU toolchains. Makefiles have been modified for the LM3S6918, LPC2148, and STR711 to support these toolchains under Cygwin.
This tarball contains a complete CVS snapshot from June 13, 2009.