mirror of
https://github.com/apache/nuttx.git
synced 2026-10-08 06:45:19 +00:00
6a9f10327f
board.h gains GPIO_SCI0_RX/TX (P610/P609, SCI0 pin group 3), needed to exercise CONFIG_RA_SCI0_UART on this board at all -- previously only SCI9's console pins existed. The new serial-test defconfig builds on nsh with SCI0 enabled as /dev/ttyS1 with its FIFO (CONFIG_RA_SCI0_FIFO, measured on hardware as the best overrun-resistant setting: TTRG=15, RXTRG=0), 1024-byte RX/TX ring buffers (up from the 256-byte default, to better absorb bursts during testing), CONFIG_SERIAL_TERMIOS + apps/system/stty (to change its baud rate live), and apps/examples/serialblaster + serialrx pointed at it, for exercising the SCI_B driver's FIFO/overrun-recovery paths independently of the SCI9 console. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Assisted-by: Claude:claude-sonnet-5 Signed-off-by: leocafonso <leocafonso@gmail.com> |
||
|---|---|---|
| .. | ||
| arm | ||
| arm64 | ||
| avr | ||
| dummy | ||
| hc/m9s12 | ||
| mips | ||
| misoc/lm32/misoc | ||
| or1k/mor1kx/or1k | ||
| renesas | ||
| risc-v | ||
| sim/sim/sim | ||
| sparc | ||
| tricore | ||
| x86/qemu/qemu-i486 | ||
| x86_64/qemu/qemu-intel64 | ||
| xtensa | ||
| z16/z16f/z16f2800100zcog | ||
| z80 | ||
| .gitignore | ||
| Board.mk | ||
| boardctl.c | ||
| CMakeLists.txt | ||
| dummy.c | ||
| Kconfig | ||
| Makefile | ||