nuttx/arch
Aurora-QIU0 637a53c136 risc-v/espressif: Fix I2C SCL/SDA pin attribute masks.
esp_i2c.c composes the pin attribute masks handed to esp_configgpio()
using the logical OR operator instead of the bitwise OR operator:

    #define SCL_PIN_ATTR (FUNCTION_2 || INPUT_PULLUP || OUTPUT_OPEN_DRAIN)
    #define SDA_PIN_ATTR (FUNCTION_2 || INPUT_PULLUP || OUTPUT_OPEN_DRAIN)

Every operand is a non-zero bit field, so the expression collapses to 1
rather than to the intended combination.  With the encodings defined in
esp_gpio.h the mask must be 171 (0xab):

    FUNCTION_2        (2 << FUNCTION_SHIFT) = 128
    INPUT_PULLUP      (INPUT | PULLUP)      = 9
    OUTPUT_OPEN_DRAIN (OUTPUT | OPEN_DRAIN) = 34

Passing 1 to esp_configgpio() selects input mode only: output and
open-drain remain disabled, the pull-up is not enabled and the function
field does not match, so the pin falls back to plain GPIO function.  The
I2C peripheral signal then never reaches the pads; the bus is left
floating while the transfer state machine still reports completion.

Every other pin attribute mask in this directory (esp_i2c_slave.c,
esp_i2c_bitbang.c, esp_spi.c, esp_twai.c) already uses the bitwise
operator for the same encodings, so esp_i2c.c was the only outlier.

Since this file is modified by this commit, the pre-existing nxstyle
violations reported by the check job are fixed as well, as asked in
CONTRIBUTING.md section 2.1 (adapt all modified files even if you did
not introduce the problem yourself):

* esp_i2c.c:1267      - statement over-indented inside its enclosing
                        block (8 spaces where the block body is at 6)
* esp_i2c.c:1303      - missing blank line after declarations
* esp_i2c.c:1592      - missing blank line after declarations
* esp_i2c.c:1710-1725 - 'case'/'default' labels inside switch(port)
                        sat at the same indent as the brace opening
                        the switch body; they belong one level further
                        in, with the case logic one more level in from
                        the label

Assisted-by: WorkBuddy:DeepSeek-V4.1-Flash
Signed-off-by: Aurora-QIU0 <2170685247@qq.com>
2026-09-18 16:15:14 +08:00
..
arm arch/arm/stm32: fix compare-match race and zero-period hang in tickless 2026-09-18 09:30:22 +08:00
arm64 arch/arm/imx9, arch/arm64/imx9: Release eDMA lock before callbacks 2026-09-15 08:41:58 -03:00
avr arch, boards, cmake: Build C++ ELF modules without __cxa_atexit. 2026-09-04 15:44:24 -03:00
ceva arch/atomic: remove up_testset in spinlock 2026-09-08 08:58:54 +08:00
dummy
hc tools: fix stale archive members surviving a Kconfig-driven CSRCS change 2026-07-28 21:26:03 -03:00
mips arch, boards, cmake: Build C++ ELF modules without __cxa_atexit. 2026-09-04 15:44:24 -03:00
misoc arch, boards, cmake: Build C++ ELF modules without __cxa_atexit. 2026-09-04 15:44:24 -03:00
or1k arch, boards, cmake: Build C++ ELF modules without __cxa_atexit. 2026-09-04 15:44:24 -03:00
renesas nuttx/libc: refine the atomic related Kconfig 2026-08-24 13:20:45 +08:00
risc-v risc-v/espressif: Fix I2C SCL/SDA pin attribute masks. 2026-09-18 16:15:14 +08:00
sim arch/sim: Add runtime HCI socket target option 2026-09-13 18:31:59 -03:00
sparc arch/atomic: remove up_testset in spinlock 2026-09-08 08:58:54 +08:00
tricore arch/atomic: remove up_testset in spinlock 2026-09-08 08:58:54 +08:00
x86 arch/x86: Add -P to CPP to suppress linemarkers. 2026-09-17 16:21:59 +08:00
x86_64 arch/intel64: don't touch the outgoing stack after releasing the csection 2026-09-15 11:39:05 -03:00
xtensa xtensa/espressif: fix lock-order deadlock in esp_wifi_event_handler() 2026-09-18 15:57:44 +08:00
z16 tools: fix stale archive members surviving a Kconfig-driven CSRCS change 2026-07-28 21:26:03 -03:00
z80
CMakeLists.txt cmake: Use NUTTX(_DIR/_BIN_DIR) instead CMAKE(_SRC_DIR/_BIN_DIR) 2026-08-09 11:13:08 -03:00
Kconfig binfmt, arch/arm: Add the CONFIG_FDPIC option and the ABI header. 2026-09-08 16:31:16 -03:00