Aksal/nuttx
3
1
Fork 1
mirror of https://github.com/apache/nuttx.git synced 2026-09-04 08:04:02 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions 2
nuttx/drivers
History
Antoine Juckler 4863564d48 drivers/eeprom: Support PE/SE/CE commands 
Add support for the page erase (PE), sector erase (SE) and chip erase
(CE) dedicated commands on supported devices.
They can be triggered using the corresponding IOCTL commands
EEPIOC_PAGEERASE, EEPIOC_SECTORERASE and
EEPIOC_CHIPERASE.

On unsupported devices, this is equivalent to writing a full page,
sector, or the entire EEPROM to 0xFF.

Signed-off-by: Antoine Juckler <6445757+ajuckler@users.noreply.github.com>
2025-12-03 22:05:44 +08:00
..
1wire drivers/1wire/1wire_ds2xxx.h: add the driver for DS2XXX eeproms. 2025-10-10 08:55:45 +02:00
aie
analog sched/sleep: replace all Signal-based sleep implement to Scheduled sleep 2025-10-17 14:05:02 +08:00
audio timers/oneshot: Remove all callback and args. 2025-11-18 13:02:29 +01:00
bch
can nuttx/can: add message alignment 2025-11-24 14:11:41 +08:00
clk
contactless sched/sleep: replace all Signal-based sleep implement to Scheduled sleep 2025-10-17 14:05:02 +08:00
coresight
crypto sched/sleep: replace all Signal-based sleep implement to Scheduled sleep 2025-10-17 14:05:02 +08:00
devicetree
dma
dummy
eeprom drivers/eeprom: Support PE/SE/CE commands 2025-12-03 22:05:44 +08:00
efuse
i2c
i2s drivers/i2s/i2schar: Implement blocking read/write operations 2025-08-27 11:07:05 +08:00
i3c
input sched/sleep: replace all Signal-based sleep implement to Scheduled sleep 2025-10-17 14:05:02 +08:00
ioexpander drivers/ioexpander/aw9523b: New driver for AW9523B i/o expander 2025-08-29 09:10:50 -03:00
ipcc
lcd drivers/lcd/st7789.c: fix byte order in st7789_fill for 3 wires 2025-12-03 14:36:46 +01:00
leds sched/sleep: replace all Signal-based sleep implement to Scheduled sleep 2025-10-17 14:05:02 +08:00
loop
math
misc sched/sleep: replace all Signal-based sleep implement to Scheduled sleep 2025-10-17 14:05:02 +08:00
mmcsd sched/sleep: replace all Signal-based sleep implement to Scheduled sleep 2025-10-17 14:05:02 +08:00
modem sched/sleep: replace all Signal-based sleep implement to Scheduled sleep 2025-10-17 14:05:02 +08:00
motor sched/sleep: replace all Signal-based sleep implement to Scheduled sleep 2025-10-17 14:05:02 +08:00
mtd drivers/mtd/w25: support custom SPI transfers delay 2025-11-27 22:27:40 +08:00
net sched/sleep: replace all Signal-based sleep implement to Scheduled sleep 2025-10-17 14:05:02 +08:00
note
pci drivers/pci: fix arm32 build warning 2025-12-01 14:38:02 +01:00
pinctrl
pipes
power sched/sleep: replace all Signal-based sleep implement to Scheduled sleep 2025-10-17 14:05:02 +08:00
rc
regmap
reset
rf
rmt
rpmsg sched/sleep: replace all Signal-based sleep implement to Scheduled sleep 2025-10-17 14:05:02 +08:00
rptun
segger
sensors drivers/sensors: Add QST QMI8658 6-axis IMU sensor support 2025-11-30 09:44:43 -03:00
serial uart_pl011: "pl011_irq_tx_ready" and "pl011_txready" is reversed. 2025-11-10 14:15:19 +08:00
spi sched/sleep: replace all Signal-based sleep implement to Scheduled sleep 2025-10-17 14:05:02 +08:00
syslog Documentation: Add description for early_syslog() 2025-10-31 08:29:17 -03:00
thermal
timers drivers/timers/arch_alarm: Revert removal of ndelay_accurate 2025-11-25 22:33:48 +08:00
usbdev sched/sleep: replace all Signal-based sleep implement to Scheduled sleep 2025-10-17 14:05:02 +08:00
usbhost drivers/usbhost_hub: Add support to Multiple TT HS HUB 2025-10-27 18:24:42 +08:00
usbmisc sched/sleep: replace all Signal-based sleep implement to Scheduled sleep 2025-10-17 14:05:02 +08:00
usbmonitor sched/sleep: replace all Signal-based sleep implement to Scheduled sleep 2025-10-17 14:05:02 +08:00
usrsock
vhost
video sched/sleep: replace all Signal-based sleep implement to Scheduled sleep 2025-10-17 14:05:02 +08:00
virtio
wireless sched/sleep: replace all Signal-based sleep implement to Scheduled sleep 2025-10-17 14:05:02 +08:00
.gitignore
CMakeLists.txt
drivers_initialize.c
Kconfig
Makefile