The GreenHills Compiler uses Unified Assembler Language by default and
it does not recognize .syntax unified instruction. Therefore, remove
them if GHS compiler is used.
Co-authored-by: Chengdong Wang <wangchengdong@lixiang.com>
Signed-off-by: xiezhanpeng3 <xiezhanpeng3@lixiang.com>
The GreenHills Compiler uses different grammer for the .type directive
in asm, this patch adds support for the grammer for arm-v8r.
Similar change for arm-v7r was done in pull request #12883.
Co-authored-by: Chengdong Wang <wangchengdong@lixiang.com>
Signed-off-by: xiezhanpeng3 <xiezhanpeng3@lixiang.com>
Make sure interrupt stack is colored before IRQ is enabled.
Currently, after calling irq_initialize in nx_start to
enable interrupts, there is still a period of execution
path before the interrupt stack is colored.
Signed-off-by: guoshengyuan1 <guoshengyuan1@xiaomi.com>
After irq_dispatch finished, the interrupt stack will be checked to
determine whether overflow occurs.
The relevant configuration reuses the configuration of stack overflow
detection during context switching.
Signed-off-by: guoshengyuan1 <guoshengyuan1@xiaomi.com>
Many different architectures re-implemented the exact same code for
`up_*delay` because it was originally written as architecture dependent
code. Busy-waiting can be done regardless of architecture, so this
commit moves that duplicated implementation to a common file with weak
definitions so that individual architectures (see tc32) are still able
to override the definition if needed/desired.
Default implementation is not included if ARCH_TIMER is enabled, since
it is more accurate and provides its own weak definitions to override.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
Many times, context switching does not occur when the thread stack
memory is almost exhausted, so we need to mofify up_check_tcbstack to
accurately detect it.
Co-authored-by: Chengdong Wang <wangchengdong@lixiang.com>
Signed-off-by: guoshengyuan1 <guoshengyuan1@xiaomi.com>
The stack alignment operation in tricore and arm porting
only aligns the size of the stack, forget to align the start addr
of the stack, this patch fixes it.
Signed-off-by: Chengdong Wang <wangchengdong@lixiang.com>
Use this command to extract archives.
Not all architectures are modified, only those commands I know
or could be logically deducted from the rest were added.
Signed-off-by: Stepan Pressl <pressl.stepan@gmail.com>
Support hardware debugging of ARM architecture, and support smp mode.We can use "up_debugpoint_add" or "up_debugpoint_remove" to add breakpoints, and the hardware will jump into the interrupt after detecting it.
Signed-off-by: wangmingrong1 <wangmingrong1@xiaomi.com>
1. When the Clang compiler turns on "-fsanitize=kernel-address", inlining, global variables, and stack detection are enabled by default and must be turned off manually.
2. -mllvm is the parameter passing method of Clang, and --param is the parameter passing method of GCC
After the modification, KASan compilation and operation will be supported for Clang 18 and above
Signed-off-by: wangmingrong1 <wangmingrong1@xiaomi.com>
fix PGTABLE_SIZE not defined in sama5d4-ek/knsh
Error: common/arm_allocateheap.c:177:11: error: 'PGTABLE_SIZE' undeclared (first use in this function); did you mean 'PGTABLE_L2_SIZE'?
177 | size -= PGTABLE_SIZE * CONFIG_SMP_NCPUS;
| ^~~~~~~~~~~~
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
Renaming "modlib" to "libelf" is more in line with the implementation content,
which makes it easier for individual developers to understand the capabilities of this module.
CONFIG_LIBC_MODLIB -> CONFIG_LIBC_ELF
Signed-off-by: chao an <anchao.archer@bytedance.com>
test:
1.use mps3-an547 build helloxx as module and run it
2.use qemu-armv7a:knsh test kernel build helloxx and run it
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
This guards use of .thumb_func with ARM_THUBM kconfig so that
CONFIG_ARM_THUMB can be off for cases like qemu-armv7r:pnsh
Signed-off-by: Yanfeng Liu <p-liuyanfeng9@xiaomi.com>
This adds semihosting based poweroff to arm/common. It uses
semihosting operation SYS_EXIT (0x18) with parameter AppExit
(0x20026).
Signed-off-by: Yanfeng Liu <p-liuyanfeng9@xiaomi.com>
It will be used to distinguish between hardware KASan and software KASan. Hardware KASan does not need to use plug-in
Signed-off-by: wangmingrong1 <wangmingrong1@xiaomi.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
S32C1I instructions may target cached, cache-bypass,
and data RAM memory locations. S32C1I instructions
are not permitted to access memory addresses in data ROM,
instruction memory or the address region allocated to
the XLMI port. Attempts to direct the S32C1I at these
addresses will cause an exception.
Signed-off-by: zhangyuan29 <zhangyuan29@xiaomi.com>
reason:
up_set_current_regs initially had two functions:
1: To mark the entry into an interrupt state.
2: To record the context before an interrupt/exception. If we switch to
a new task, we need to store the upcoming context regs by calling up_set_current_regs(regs).
Currently, we record the context in other ways, so the second function is obsolete.
Therefore, we need to rename up_set_current_regs to better reflect its actual meaning,
which is solely to mark an interrupt.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
reason:
up_set_current_regs initially had two functions:
1: To mark the entry into an interrupt state.
2: To record the context before an interrupt/exception. If we switch to
a new task, we need to store the upcoming context regs by calling up_set_current_regs(regs).
Currently, we record the context in other ways, so the second function is obsolete.
Therefore, we need to rename up_set_current_regs to better reflect its actual meaning,
which is solely to mark an interrupt.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
profile-generate is used to generate compilation feedback optimization data, not just code coverage data
It will rely on the toolchain library:
nuttx/libs/libc/misc/lib_utsname.c:94:(.text.uname+0x2c): undefined reference to `__gcov_indirect_call_profiler_v4'
arm-none-eabi-ld: nuttx/libs/libc/misc/lib_utsname.c:113:(.text.uname+0x178): undefined reference to `__gcov_indirect_call'
arm-none-eabi-ld: nuttx/libs/libc/misc/lib_utsname.c:113:(.text.uname+0x188): undefined reference to `__gcov_time_profiler_counter'
arm-none-eabi-ld: nuttx/staging/libc.a(lib_utsname.o):(.data..LPBX0+0x30): undefined reference to `__gcov_merge_time_profile'
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
Some armv7-m-based SoCs do not work with atomic instructions,
even though armv7-m supports them.
To avoid using atomic instructions generated by gcc,
CONFIG_LIBC_ARCH_ATOMIC is newly introduced with which
arch_atomic.c is linked explicitly.
However, the function names need to be changed to avoid
build errors, since the functions described in stdatomic.h
are gcc built-in and inlined when the code is compiled.
About libcxx with CONFIG_LIBC_ARCH_ATOMIC, it still
does not work. It is also needed to call nx_atomic_ ver
instead of __atomic ver in
libcxx/include/__atomic/cxx_atomic_lmpl.h.
Signed-off-by: Takuya Miyasita <Takuya.Miyashita@sony.com>
1. cmake uses clang++ as a connector, and does not currently support:
clang++: error: unknown argument: '-wl,--print-memory-usage'
clang++: error: no input files
Signed-off-by: wangmingrong1 <wangmingrong1@xiaomi.com>
1. enable CONFIG_BUILTIN_COMPILER_RT to built libclang_rt.builtins-xxx.a and no longer use the compiler's built-in
2. Modify clang version acquisition to get two decimal points
3. It has been ported to support four architectures: ARM, ARM64, RISCV, and x86_64, among which ARM has been validated
Signed-off-by: wangmingrong1 <wangmingrong1@xiaomi.com>
Add --no-warn-rwx-segments in case of RAM boot mode to linker to
suppress the below warning:
"nuttx has a LOAD segment with RWX permissions"
Signed-off-by: Jinliang Li <lijinliang1@lixiang.com>
