Move network interface up operation (ifup) to work queue in RNDIS USB
device driver to avoid calling netdev_carrier_on API in interrupt context.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
When all signals are disabled, nxsig_notification is not available and
should not be invoked. Remove the call to avoid build and runtime issues
in no-signal configurations.
Signed-off-by: Chengdong Wang <wangchengdong@lixiang.com>
When all signals are disabled, nxsig_notification is not available and
should not be invoked. Remove the call to avoid build and runtime issues
in no-signal configurations.
Signed-off-by: Chengdong Wang <wangchengdong@lixiang.com>
When all signals are disabled, nxsig_notification is not available and
should not be invoked. Remove the call to avoid build and runtime issues
in no-signal configurations.
Signed-off-by: Chengdong Wang <wangchengdong@lixiang.com>
When all signals are disabled, nxsig_notification is not available and
should not be invoked. Remove the call to avoid build and runtime issues
in no-signal configurations.
Signed-off-by: Chengdong Wang <wangchengdong@lixiang.com>
When all signals are disabled, nxsig_notification is not available and
should not be invoked. Remove the call to avoid build and runtime issues
in no-signal configurations.
Signed-off-by: Chengdong Wang <wangchengdong@lixiang.com>
DEV_GPIO_NSIGNALS relies on signal support. Add an explicit Kconfig
dependency on SIGNALS to prevent invalid no-signal configurations.
Signed-off-by: Chengdong Wang <wangchengdong@lixiang.com>
When all signals are disabled, nxsig_notification is not available and
should not be invoked. Remove the call to avoid build and runtime issues
in no-signal configurations.
Signed-off-by: Chengdong Wang <wangchengdong@lixiang.com>
When all signals are disabled, remove the altmdm_timer-related
implementation and API definitions.
Signed-off-by: Chengdong Wang <wangchengdong@lixiang.com>
Changes the default value for CONFIG_BOARD_LOOPSPERMSEC to -1, which is
invalid. All boards that forget to configure this value will encounter a
static assertion at compile time, enforcing that configurations
upstreamed to NuttX have calibrated values for correct delay timings.
Boards which implement ALARM_ARCH or TIMER_ARCH do not rely on the
busy-loop delay implementation and thus only have a run-time check to
ensure proper delay-timings (in the case where delays are used before
the alarm/timer driver is registered).
Some boards already in the NuttX upstream do not have calibrated values,
but there are no users who currently own the board to submit a
calibrated value for the configurations to use. In this scenario, the
value is temporarily set to 0 and a warning is displayed so that users
of these boards are informed of the calibration process.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
Mainline Linux doesn't use data encapsuation or flow control in its
tty_rpmsg driver. Create a NuttX counterpart which matches this
implementation.
This driver uses the static "rpmsg-tty" name to connect with the
remote service.
Signed-off-by: Maarten Zanders <maarten@zanders.be>
Parameter isconsole in uart_rpmsg_init() has two effects: set uart
terminal flags for typical console use and register the device as
/dev/console. These are separate things. The latter might not be
wanted in all cases.
Use the already existing config option CONFIG_RPMSG_UART_CONSOLE to
conditionally register the uart as console device.
Signed-off-by: Maarten Zanders <maarten@zanders.be>
Add support for ST7796 TFT LCD controller (320x480). The driver
implements the NuttX framebuffer interface for SPI-connected displays.
Features:
- SPI interface with CONFIG_SPI_CMDDATA for D/C pin control;
- RGB565 (16-bit) and RGB666 (18-bit) color formats;
- Runtime rotation support (0, 90, 180, 270 degrees) via MADCTL;
- Board-provided configuration via st7796_config_s structure;
- Partial screen update via updatearea for efficient rendering;
- Persistent swap buffer to avoid per-frame allocations;
- Proper ST7796S initialization sequence with documented timing;
The driver uses a board-provided configuration structure allowing
flexible setup of resolution, SPI frequency, color depth, and
initial MADCTL value without requiring Kconfig options in the
generic driver.
Architecture changes in this revision as per request:
- Moved internal register commands to .c file (private)
- Moved MADCTL bit definitions to .c file (private)
- Moved struct st7796_cmd_s to .c file (private)
- Converted MADCTL orientation macros to absolute values
- Moved CONFIG_SPI_CMDDATA error check to beginning of file
- Removed duplicated CONFIG_SPI_CMDDATA guards
- Public header contains only board configuration API
- Changed the Kconfig auto-select FB from 'select' to 'depends on'
Tested with LVGL graphics library on STM32H753ZI board (my own port).
Signed-off-by: Vinicius May <vmay.sweden@gmail.com>
Intermediate files of make depend like .ddc and .dds may remain
when make is interrupted. Remove them using make distclean.
Signed-off-by: SPRESENSE <41312067+SPRESENSE@users.noreply.github.com>
1. Move DEBUGASSERT to correct place
2. Leave it out if composite device
3. Move working thread stop to separate function
4. Call it from unbind function for composite device
Signed-off-by: Ari Kimari <ari.kimari@tii.ae>
Add a generic kmatrix lower-half with polling/debounce, STM32 board adapters, Kconfig options, a public API header, and a test example/documentation.
Signed-off-by: Felipe Moura <moura.fmo@gmail.com>
decouple kbd / keypad.
Fix some comments
add documentation
fix rule issues
Update CMakeLists.txt
update documentation.
improve documentation
In file_dup3, the file descriptor is initialized with the O_NONBLOCK flag.
If the inode's ioctl(FIONBIO) call fails with a result other than OK or
ENOTTY, the file may be mistakenly released.
Signed-off-by: zhangyuan29 <zhangyuan29@xiaomi.com>
Improve checks for the position outside of the LCD's area. Fix the input
when possible.
Slightly improve the documentation.
Signed-off-by: Jiri Vlasak <jvlasak@elektroline.cz>
When the VIRTIO_RPMSG_F_CPUNAME feature is not negotiated, the driver
previously would crash due to DEBUGASSERT. This commit adds support
for a fallback mechanism:
1. Add rpmsg_virtio_probe_cpuname() API that accepts an optional cpuname
parameter to be used when VIRTIO_RPMSG_F_CPUNAME is not available.
2. Modify rptun driver to pass the cpuname from rptun device config
to rpmsg_virtio_probe_cpuname().
3. Refactor rptun device register/unregister to prioritize RPMSG device
handling before other virtio device types.
This ensures the system works correctly in scenarios where the remote
side does not support the VIRTIO_RPMSG_F_CPUNAME feature.
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
The vhost driver uses work_queue() for deferred probe but was missing
the SCHED_WORKQUEUE Kconfig dependency, causing link errors on boards
that don't enable workqueue by default.
Signed-off-by: wangzhi16 <wangzhi16@xiaomi.com>
Convert VHOST_DEFERED_PROBE_PERIOD from a raw value to use MSEC2TICK()
macro, ensuring the delay is correctly converted from milliseconds to
system ticks regardless of the configured tick rate.
Signed-off-by: Yongrong Wang <wangyongrong@xiaomi.com>
Change DRIVERS_VIRTIO and DRIVERS_VHOST from menuconfig to hidden config
options. Each virtio/vhost sub-driver now automatically selects its parent
config, eliminating the need to manually enable DRIVERS_VIRTIO or
DRIVERS_VHOST in defconfig files.
This simplifies board configuration by removing redundant CONFIG_DRIVERS_VIRTIO
entries from affected defconfig files.
Signed-off-by: Yongrong Wang <wangyongrong@xiaomi.com>
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
Add vhost_get_vq_buffers() API to retrieve all chained buffers from a
virtqueue in one call. This simplifies handling of scatter-gather I/O
where data spans multiple descriptors.
The function populates an array of virtqueue_buf structures with buffer
pointers and lengths, returning the descriptor head index on success.
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
Signed-off-by: hongfengchen <hongfengchen@xiaomi.com>
Fix typos in comments of drivers/power/pm/activity_governor.c and unify
comment style for consistency.
Signed-off-by: Hyunjun Lee <hyunjunk.lee@samsung.com>
since the judgment for network card selection was changed from IS_UP to
IS_RUNNING, drivers that lack carrier_on need to add the carrier_on
operation; otherwise, network access issues will occur.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Add TX/RX timestamp tracking for rpmsg_port to enable latency
measurement and debugging:
- Add rpmsg_port_get_timestamp() to retrieve buffer timestamps
- Add rpmsg_port_update_timestamp() to record timestamps at TX/RX time
- Integrate timestamp recording in rpmsg_port_spi and rpmsg_port_spi_slave
- Reserve space for rpmsg_timestamp_s in buffer size calculations
Signed-off-by: liaoao <liaoao@xiaomi.com>
Add rpmsg_get_timestamp() API to get the TX/RX timestamps of an rpmsg
buffer. This is useful for latency measurement and debugging purposes.
The new rpmsg_timestamp_s structure contains:
- tx_nsec: timestamp when the buffer was transmitted
- rx_nsec: timestamp when the buffer was received
Signed-off-by: liaoao <liaoao@xiaomi.com>
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
Replace direct virtqueue internal field access with virtqueue_nused()
API to check for pending buffers in interrupt handlers. This improves
code maintainability and handles cached memory scenarios correctly.
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
Resetting during initialization can cause qemu to lock up, for example, virtio-gpu. qemu does not need to reset virtio during initialization.
Signed-off-by: wangmingrong1 <wangmingrong1@xiaomi.com>
Gpio output value must be set on OLATA and OLATB registers.
Summary
Why is this change necessary?
This is a bug fix. The MCP23x17 driver was writing GPIO output values to incorrect registers, causing output
pins to not behave as expected.
What functional part of the code is being changed?
The MCP23x17 I/O expander driver (drivers/ioexpander/mcp23x17.c).
How does the change work?
The fix ensures GPIO output values are written to the OLATA and OLATB (Output Latch) registers instead of the
incorrect registers. The OLAT registers are the proper registers for controlling the actual output pin
states on the MCP23x17.
Impact
- User experience: No adaptation required. This fix corrects existing broken behavior.
- Build: No impact.
- Hardware: Affects boards using the MCP23x17 I/O expander.
- Documentation: None required.
- Security: No impact.
- Compatibility: Backward compatible - fixes incorrect behavior.
Testing
Build Host:
- OS: Ubuntu 22.04
- Compiler: arm-none-eabi-gcc
Target:
- Architecture: ARM (RP2350)
- Board: RP2350-based board
- Configuration: Custom config with MCP23x17 enabled over I2C0
Testing performed:
- Connected MCP23x17 to RP2350 via I2C0
- Attached an LED array to all 16 GPIO pins of the MCP23x17
- Configured all 16 GPIO as outputs
- Wrote a simple test application to toggle the LEDs on and off
- Before fix: LEDs did not respond correctly to output commands
- After fix: All 16 LEDs toggle on/off as expected
Signed-off-by: paolo <paolo.volpi@gmail.com>
1. Use virtio_read_config_bytes() to read the string types in
rpmsg-virtio and virtio-net;
2. Use virtio_read_config_member() to read the elements in
virtio-snd configuration space;
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
Implement Linux-compatible TFD_TIMER_CANCEL_ON_SET flag for timerfd to
allow applications to detect discontinuous changes to CLOCK_REALTIME.
Background:
According to Linux timerfd_create(2) man page, when a timerfd is created
with CLOCK_REALTIME and TFD_TIMER_CANCEL_ON_SET flag is specified, the
read() operation should fail with ECANCELED if the real-time clock
undergoes a discontinuous change. This allows applications to detect
and respond to system time changes.
Implementation:
1. Add clock notifier infrastructure (clock_notifier.h/c) to notify
interested parties when system time changes
2. Implement TFD_TIMER_CANCEL_ON_SET flag support in timerfd
3. Register timerfd with clock notifier when flag is set
4. Cancel timer and return ECANCELED when clock change is detected
5. Notify clock changes in:
- clock_settime()
- clock_initialize()
- clock_timekeeping_set_wall_time()
- rpmsg_rtc time synchronization
Changes include:
- New files: include/nuttx/clock_notifier.h, sched/clock/clock_notifier.c
- Modified: fs/vfs/fs_timerfd.c to handle TFD_TIMER_CANCEL_ON_SET
- Modified: clock subsystem to call notifier chain on time changes
- Modified: rpmsg_rtc to notify time changes during sync
Use case example:
Applications using timerfd with absolute time can now detect when
system time is adjusted (e.g., NTP sync, manual time change) and
take appropriate action such as recalculating timeouts or updating
scheduled events.
Reference: https://man7.org/linux/man-pages/man2/timerfd_create.2.html
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
Add sensor monitor logs to analyze issues related to driver activation.
This commit adds comprehensive sensor monitoring logs to the GNSS uORB driver
to facilitate debugging and analysis of driver activation issues.
Signed-off-by: wangjianyu3 <wangjianyu3@xiaomi.com>
Now we can release the rx buffer in ept->cb, ept->cb should copy
the rx buffer it's private buffer and then return
RPMSG_SUCCESS_BUFFER_RETURNED.
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
Invalid data is cleared during garbage collection rather than
deleted during initialization, thus accelerating the
initialization speed.
Signed-off-by: zhaoxingyu1 <zhaoxingyu1@xiaomi.com>
When key string found corrupted during garbage collection,
then remove key-value pair from the flash.
Signed-off-by: zhaoxingyu1 <zhaoxingyu1@xiaomi.com>
