bt_conn_send() splits an outgoing L2CAP PDU into HCI ACL fragments no
larger than g_btdev.le_mtu, the controller's HCI ACL data packet length.
The first fragment caps its length correctly:
len = remaining;
if (len > g_btdev.le_mtu)
{
len = g_btdev.le_mtu;
}
The continuation loop below uses '<' instead of '>', so a continuation
shorter than le_mtu has its length raised to le_mtu rather than left
alone. Both len and remaining are uint16_t, which turns a wrong length
into an underflow:
With le_mtu 251 and a 300-byte PDU, the first fragment takes 251 bytes
and leaves remaining == 49. The loop then raises len from 49 to 251, so
memcpy(bt_buf_extend(buf, len), ptr, len);
reads 202 bytes past the end of the source, and
remaining -= len;
evaluates 49 - 251 as a uint16_t, wrapping to 65334. On the next
iteration len is 65334, which is not less than le_mtu, so it survives
the cap. bt_buf_extend() carries only a DEBUGASSERT on tailroom, so
with assertions disabled it adds 65334 to buf->len and returns, and the
memcpy writes 64 KB into a pooled buffer sized for a few hundred bytes.
Only the last fragment of a multi-fragment PDU is normally shorter than
le_mtu, so the first fragmented transmission triggers it.
Signed-off-by: AlmAck <gluca86@gmail.com>
Rename atomic_fetch_add/sub/or/and/xor to atomic_add/sub/or/and/xor
to avoid conflicts with the C/C++ standard library naming. The
atomic_fetch_xxx naming is reserved by the standard; keeping it causes
function name conflicts when source files indirectly include both
<nuttx/atomic.h> and <atomic>/<stdatomic.h>.
Signed-off-by: zhangyu117 <zhangyu117@xiaomi.com>
hci_acl() looked up the connection with bt_conn_lookup_handle(), which
returns a new reference, but never released it. This leaked one conn
reference for every received ACL packet.
bt_conn_receive() also consumes the buffer on every path: it forwards
to l2cap (which releases) or stores the buffer in conn->rx without an
addref. The hci_rx_work() worker then called bt_buf_release() on the
same buffer, which caused a double free or use-after-free.
Take an extra buffer reference for the worker to release, and release
the connection reference from the lookup.
Assisted-by: Fable
Signed-off-by: AbhinavMir <atg271@gmail.com>
debug.h is a NuttX-specific, non-POSIX header. Placing it in the
top-level include/ directory creates naming conflicts with external
projects that define their own debug.h.
This commit moves the canonical header to include/nuttx/debug.h,
following the NuttX convention for non-POSIX/non-standard headers,
and updates all in-tree references.
A backward-compatibility shim is left at include/debug.h that
emits a deprecation #warning and re-includes <nuttx/debug.h>,
allowing out-of-tree code to continue building while migrating.
Signed-off-by: Piyush Patle <piyushpatle228@gmail.com>
Fix 269 occurrences of duplicate "the" word typo found in 209 files
across source code, header files, and configuration.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Nuttx currently has 2 types of sleep interfaces:
1. Signal-scheduled sleep: nxsig_sleep() / nxsig_usleep() / nxsig_nanosleep()
Weaknesses:
a. Signal-dependent: The signal-scheduled sleep method is bound to the signal framework, while some driver sleep operations do not depend on signals.
b. Timespec conversion: Signal-scheduled sleep involves timespec conversion, which has a significant impact on performance.
2. Busy sleep: up_mdelay() / up_udelay()
Weaknesses:
a. Does not actively trigger scheduling, occupy the CPU loading.
3. New interfaces: Scheduled sleep: nxsched_sleep() / nxsched_usleep() / nxsched_msleep() / nxsched_ticksleep()
Strengths:
a. Does not depend on the signal framework.
b. Tick-based, without additional computational overhead.
Currently, the Nuttx driver framework extensively uses nxsig_* interfaces. However, the driver does not need to rely on signals or timespec conversion.
Therefore, a new set of APIs is added to reduce dependencies on other modules.
(This PR also aims to make signals optional, further reducing the code size of Nuttx.)
Signed-off-by: chao an <anchao.archer@bytedance.com>
Modify the kernel to use only atomic_xx and atomic64_xx interfaces,
avoiding the use of sizeof or typeof to determine the type of
atomic operations, thereby simplifying the kernel's atomic
interface operations.
Signed-off-by: zhangyuan29 <zhangyuan29@xiaomi.com>
change bt_driver_register/unregister function name to
bt_driver_set/unset, which would be prepared for bt_driver.h
Signed-off-by: chengkai <chengkai@xiaomi.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
By enabling the config `CONFIG_BLUETOOTH_TXCMD_PINNED_TO_CORE` and
setting the value of `CONFIG_BLUETOOTH_TXCMD_CORE`, it's possible
to pin the HCI TX thread to a specific core on a SMP-enabled setup.
This is necessary for devices that require that the function that
sends data (`bt_send`) to be called from a specific core.
1. Update all CMakeLists.txt to adapt to new layout
2. Fix cmake build break
3. Update all new file license
4. Fully compatible with current compilation environment(use configure.sh or cmake as you choose)
------------------
How to test
From within nuttx/. Configure:
cmake -B build -DBOARD_CONFIG=sim/nsh -GNinja
cmake -B build -DBOARD_CONFIG=sim:nsh -GNinja
cmake -B build -DBOARD_CONFIG=sabre-6quad/smp -GNinja
cmake -B build -DBOARD_CONFIG=lm3s6965-ek/qemu-flat -GNinja
(or full path in custom board) :
cmake -B build -DBOARD_CONFIG=$PWD/boards/sim/sim/sim/configs/nsh -GNinja
This uses ninja generator (install with sudo apt install ninja-build). To build:
$ cmake --build build
menuconfig:
$ cmake --build build -t menuconfig
--------------------------
2. cmake/build: reformat the cmake style by cmake-format
https://github.com/cheshirekow/cmake_format
$ pip install cmakelang
$ for i in `find -name CMakeLists.txt`;do cmake-format $i -o $i;done
$ for i in `find -name *\.cmake`;do cmake-format $i -o $i;done
Co-authored-by: Matias N <matias@protobits.dev>
Signed-off-by: chao an <anchao@xiaomi.com>
This bluetooth stack remains in an inconsistent state when
the bluetooth HCI module is removed. This change adds a
bt_netdev_unregister function that can be used to clean up
after a module is removed. Some global variables are also
set to their default values.
In the past, header file paths were generated by the incdir command
Now they are generated by concatenating environment variables
In this way, when executing makefile, no shell command will be executed,
it will improve the speed of executing makfile
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
since it is impossible to track producer and consumer
correctly if TCP/IP stack pass IOB directly to netdev
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
