Prefer mounting /tmp with tmpfs in the SIM default rc.sysinit when
CONFIG_FS_TMPFS is enabled, and keep the FAT RAMDISK path as a
fallback for configurations that only enable CONFIG_FS_FAT.
Signed-off-by: Arjav Patel <arjav1528@gmail.com>
Rework ipv4_input() packet classification to make the control flow
clearer and keep the common local-unicast case first.
This change:
- handles local packets first
- keeps broadcast/multicast handling in dedicated branches
It also prevents broadcast and multicast packets from falling through
into the unicast forward path.
Signed-off-by: Shunchao Hu <ankohuu@gmail.com>
The PR #18654 removed the Kconfig option `RMT_LOOP_TEST_MODE` used
by Espressif's RMT peripheral. This commit reintroduces it as a
lower-half driver interface used to enable internal loopback tests.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
Enable USART3 support for STM32F412 and use it as the default NUCLEO-F412ZG nsh console path.
The ST-LINK virtual COM port on this board is wired to USART3 on PD8/PD9. Restore USART2 to its header-pin routing, switch the nsh defconfig to USART3, and update the board documentation to match the shipped solder-bridge configuration described in issue #17722.
Signed-off-by: aviralgarg05 <gargaviral99@gmail.com>
This sensor was not present in the Make.defs file
AMG88xx Infrared Array Sensor
https://github.com/apache/nuttx/pull/12829
Moved:
These drivers can be used with sensor connected over SPI or I2C bus
Bosch Sensortec BMI160
Bosch Sensortec BMI088
Signed-off-by: simbit18 <simbit18@gmail.com>
- Moved the creation of the `nxtmpdir` folder for third-party packages to the root `CMakeLists.txt` file.
cmake/nuttx_3rdparty.cmake
- Add the nuttx_remove_nxtmpdir function to remove the third-party cache directory under nuttx/../nxtmpdir
Signed-off-by: simbit18 <simbit18@gmail.com>
- fix a "a label can only be part of a statement and
a declaration is not a statement" compile error.
- toolchain xtensa-esp32s3-elf-gcc
(crosstool-NG esp-2021r2) 8.4.0
Signed-off-by: Shunchao Hu <ankohuu@gmail.com>
Align _etbss in the linker script so (_etbss - _stdata) matches the
compiler's aligned TLS block size.
Fix ostest failure for CONFIG_SCHED_THREAD_LOCAL=y
Signed-off-by: raiden00pl <raiden00@railab.me>
copy logic from arm64 to fix SMP bugs in the signal trampoline
caused signals to be lost or mis-delivered in ostest signest_test
on qemu-intel64/jumbo.
Also update comments so this logic is easier to follow
Signed-off-by: raiden00pl <raiden00@railab.me>
During startup we should avoid using _info since the system is not
fully initialized. Default to use ets_printf which is safe for
this scenario.
Signed-off-by: Filipe Cavalcanti <filipe.cavalcanti@espressif.com>
Fix lowercase -wl to correct -Wl for GCC linker pass-through
option in LTO full configuration. The lowercase form is not
recognized by the linker, causing --print-memory-usage to be
silently ignored.
Signed-off-by: v-yanxingyu <v-yanxingyu@xiaomi.com>
Add board support for on-chip bxCAN: stm32_can.c registers /dev/can0 via stm32_caninitialize() when CONFIG_STM32_CAN_CHARDRIVER is set; stm32_cansock.c calls stm32_cansockinitialize() for the socket-CAN path when CONFIG_STM32_CAN_SOCKET is set.
Signed-off-by: Alexey Matveev <tippet@yandex.ru>
Add dedicated Spresense defconfigs for ostest, coremark and\ngetprime so the board has focused test and benchmark entry\npoints for these workloads.\n\nThis keeps the change scoped to new board configurations and\nfollows the existing Spresense baseline settings for the new\ntargets.
Signed-off-by: aviralgarg05 <gargaviral99@gmail.com>
Increase image slot size from ~1MB to ~1.4MB to allow more features by default.
Solves issues when enabling debug features would extrapolate the slot size.
Signed-off-by: Filipe Cavalcanti <filipe.cavalcanti@espressif.com>
Fixed a few bugs in the initial stm32_usbdrdhost.c implementation
when using a USB hub. Fixed fault when freeing control endpoints.
Fixed crash when disconnecting devices from hubs due ot use after free.
Signed-off-by: daniellizewski <daniellizewski@geotab.com>
We have implemented CI Build Retry for mitigating Download Failures. But right now it will reuse any Corrupted Downloads (instead of deleting them), which will cause CI Build Retry to fail repeatedly: https://github.com/apache/nuttx/actions/runs/24611381081/job/71966407518#step:10:627
```
Ignored files: system/argtable3/v3.2.0.7402e6e.tar.gz
gzip: stdin: not in gzip format
make[3]: *** [Makefile:76: argtable3] Error 2
```
This PR proposes to change `git clean -fd` to `git clean -xfdq`. This will remove any Corrupted Downloads, preventing their reuse for CI Build Retry:
```bash
## Simulate a corrupted download for argtable3
$ tools/configure.sh qemu-armv8a/netnsh
$ Downloading v3.2.0.7402e6e.tar.gz--argtable3
## Press Ctrl-C to stop the build
## `git clean -fd` won't remove the corrupted download
$ cd ../apps
$ git clean -fd
$ find . -name "v3.2.0.7402e6e.tar.gz"
./system/argtable3/v3.2.0.7402e6e.tar.gz
## `git clean -xfdq` removes the corrupted download
$ git clean -xfdq
$ find . -name "v3.2.0.7402e6e.tar.gz"
## Corrupted download is deleted correctly
```
`git clean -xfdq` is also found in the same testbuild script, so we are using it consistently:
12e8f92a28/tools/testbuild.sh (L286-L291)
Signed-off-by: Lup Yuen Lee <luppy@appkaki.com>
RFC 3171 reserves 224.0.0.0/24 for link-local IPv4 multicast
scope, so packets in this range must not be forwarded by routers,
regardless of the TTL value.
IPv6 also defines multicast scopes that must not be forwarded beyond
the local topology. In particular, interface-local and link-local
multicast destinations must not be routed across interfaces.
Add IPv4/IPv6 scope checks so non-forwardable multicast packets are
rejected before entering the multicast forwarding path.
Signed-off-by: Shunchao Hu <ankohuu@gmail.com>
This commit adds an entry for the ESP32-P4-Function-EV-Board's
`psram_usrheap` defconfig on docs.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
This commit enables using ESP32-P4's PSRAM on Function-EV-Board.
The in-chip PSRAM memory is added to the user heap and the internal
memory is dedicated to a kernel heap.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
Document that ntpc can use NTP servers learned from DHCP option 42 when DHCP client support is enabled.
Signed-off-by: Jerry Ma <shichunma@bestechnic.com>
* Add `./tools/checkpatch.sh -c -u -m -g HEAD~...HEAD` example
to match checks performed by our CI.
* Add cross-reference to checkpatch.sh documentation.
Signed-off-by: Tomasz 'CeDeROM' CEDRO <tomek@cedro.info>
fix compilation error for CONFIG_SERIAL_TERMIOS=y
chip/stm32_serial_v2.c:923:35: error: 'struct up_dev_s' has no member named 'rxftcfg'
923 | regval |= USART_CR3_RXFTCFG(priv->rxftcfg);
Signed-off-by: raiden00pl <raiden00@railab.me>
The idle task is used during initialization and its stack size is
operating near the boundaries of a stack overflow, causing
occasional crashes during board's bringup. This commit increases
the idle task stack size to solve such an issue.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
Added stm32_usbdrdhost.c which adds USB FS host mode support using the
embedded PHY. Added Kconfig to select Device or Host.
Example config nucleo-h563zi:usbmsc added to test functionality
Signed-off-by: daniellizewski <daniellizewski@geotab.com>
In proxy_fstat(), the write permission bits for a block driver proxy
were gated on `i_ops->read` instead of `i_ops->write`:
The effect is that a driver implementing read but not write would have
S_IWOTH | S_IWGRP | S_IWUSR incorrectly set in the fstat() result,
reporting the file as writable when it is not.
Fix: replace `->read` with `->write` in the write check condition.
Signed-off-by: Abhishek Mishra <mishra.abhishek2808@gmail.com>
