Extend CONFIG_LIBCXXTOOLCHAIN support to all remaining platforms
in CMake builds by explicitly locating and linking libstdc++.a
from the toolchain. This prevents build failures caused by STL
header/library mismatches where toolchain headers are included
without the corresponding library.
* Adds nuttx_find_toolchain_lib() calls for all platforms.
* Aligns CMake behavior with Make build system.
Signed-off-by: trns1997 <trns1997@gmail.com>
Add validation to ensure allocated stack size does not exceed TLS_MAXSTACK when
CONFIG_TLS_ALIGNED is enabled, and verify proper stack alignment using STACK_ALIGN_MASK
across all architectures. This improves stack safety and prevents potential TLS overflow conditions.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Rename STACK_ALIGNMENT macro to STACKFRAME_ALIGN throughout the codebase
to provide clearer naming semantics. The new name better reflects the macro's
purpose of frame alignment rather than general stack alignment.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Move stack alignment and kernel stack macros from architecture-specific internal
headers to public include/nuttx/irq.h. Consolidates duplicate definitions across
17 architecture families, reducing code duplication while enabling common code
to access these core alignment utilities without architecture dependencies.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Add support to disable signals actions related struct
Co-authored-by: guoshichao <guoshichao@xiaomi.com>
Signed-off-by: Chengdong Wang <wangchengdong@lixiang.com>
After addrenv_switch(), the current running task (this_task) may change due to
deferred work execution. Update all architecture interrupt, syscall, and exit
handlers to re-fetch tcb = this_task() after addrenv_switch(). Ensures scheduler
and context operations use the correct TCB, preventing context corruption and
exceptions across SMP and memory-protected builds.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Commit e5db83d7db introduced a change to the file updated by this patch
which caused a build-time warning about unused variable. This patch
removes declaration of the variable from the code.
This patch also updates comment that relates to what was changed
in the commit.
Patch was tested by building breadxavr:nsh - resulting binary is identical
(by SHA256 checksum) and the warning is no longer present.
Signed-off-by: Kerogit <kr.git@kerogit.eu>
This patch adds support for Two-Wire interface in AVR Dx chips.
Only master mode is supported in this version.
The driver was tested using TC74Ax thermal sensor and simple application
that read the temperature from it. (Driver for the sensor is not in-tree.)
Signed-off-by: Kerogit <kr.git@kerogit.eu>
The Kconfig configuration was offering alternate routing options
for USART peripherals but there was no code which would act
on those settings. This patch fixes it.
Additionally, since the code is being worked on, this patch
also renames USART-related configuration options from AVR_HAS_
to AVR_HAVE_ . This is based on GitHub and mailing list discussion
where it was pointed out that other architectures use "HAVE".
Patch was tested by choosing few combinations of the configuration
and verifying which registers are being set in disassembly. Base
configuration was also tested by an application that uses two ports.
Signed-off-by: Kerogit <kr.git@kerogit.eu>
Toolchain.defs file was treating all supported chips as AVR128DA28,
which became apparent while testing changes in USART handling.
Signed-off-by: Kerogit <kr.git@kerogit.eu>
Make sure interrupt stack is colored before IRQ is enabled.
Currently, after calling irq_initialize in nx_start to
enable interrupts, there is still a period of execution
path before the interrupt stack is colored.
Signed-off-by: guoshengyuan1 <guoshengyuan1@xiaomi.com>
After irq_dispatch finished, the interrupt stack will be checked to
determine whether overflow occurs.
The relevant configuration reuses the configuration of stack overflow
detection during context switching.
Signed-off-by: guoshengyuan1 <guoshengyuan1@xiaomi.com>
Many different architectures re-implemented the exact same code for
`up_*delay` because it was originally written as architecture dependent
code. Busy-waiting can be done regardless of architecture, so this
commit moves that duplicated implementation to a common file with weak
definitions so that individual architectures (see tc32) are still able
to override the definition if needed/desired.
Default implementation is not included if ARCH_TIMER is enabled, since
it is more accurate and provides its own weak definitions to override.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
Many times, context switching does not occur when the thread stack
memory is almost exhausted, so we need to mofify up_check_tcbstack to
accurately detect it.
Co-authored-by: Chengdong Wang <wangchengdong@lixiang.com>
Signed-off-by: guoshengyuan1 <guoshengyuan1@xiaomi.com>
Complete the missing scheduling information in some architectures
In these architectures (riscv, avr, tricor) context switching
can occur in both up_switch_context and xx_doirq
Co-authored-by: yinshengkai <yinshengkai@xiaomi.com>
Signed-off-by: guoshengyuan1 <guoshengyuan1@xiaomi.com>
Replace all nxsched_suspend/resume_*** with nxsched_switch_context
Delete nxsched_resume_scheduler in up_exit and call it uniformly in task_exit
Co-authored-by: yinshengkai <yinshengkai@xiaomi.com>
Signed-off-by: guoshengyuan1 <guoshengyuan1@xiaomi.com>
These archs only align the size of the stack, forgeting to do the
stack start addr alignment, this patch fixes it.
Signed-off-by: Chengdong Wang <wangchengdong@lixiang.com>
Use this command to extract archives.
Not all architectures are modified, only those commands I know
or could be logically deducted from the rest were added.
Signed-off-by: Stepan Pressl <pressl.stepan@gmail.com>
AVR uses Hardward architecture with separate address space for program
memory (flash) and data memory (RAM). Normal program flow can only
access data memory which means that all variables - including const
variables - have to be copied into RAM to be accessible. (This happens
automatically during startup.)
It is possible to work around this limitation in software but that
can have severe impact on performance and/or API complexity. It is hardly
feasible to change NuttX interfaces in a way that would allow to make use
of this workaround.
On newer AVR families, there is an alternative option enabled by this patch.
These chips map part of their program memory (a 32kB window) into data
memory address space. This patch leverages this feature and adds support
for placing const variables into the mapped window. No copy to RAM is done
for them.
Const variables are therefore loaded directly from flash (not consuming
RAM) while still being available to be used by any NuttX interface.
Linker script of breadxavr board is changed to make use of these changes.
Tested by verifying string addresses - parameters in printf call
in a custom application (and also by running the application and verifying
its output.)
Documentation tested by build.
Signed-off-by: Kerogit <kr.git@kerogit.eu>
The up_saveusercontext function leverages USER_SAVE macro,
which is ordinarily used as a first half of the context switch.
This macro is therefore unsuitable to be used standalone,
it pops return address from the stack and does not return.
This patch adds missing instructions to do what would otherwise
be done by the second half of the context switch.
Tested by compiling and verifying the disassembly - the function
no longer falls through to the next function in the program memory,
push/pop instructions are balanced and stack contents preserved
Signed-off-by: Kerogit <kr.git@kerogit.eu>
After a mailing list suggestion, the indirection that enabled
ARCH_TOOLCHAIN_GCC only when user requested it is removed.
The indirection was a safety measure for chips and boards with linker
scripts that (possibly) do not handle keeping for example .vectors
section even if the linker considers it unreferenced.
Instead, all existing configurations now disable
CONFIG_DEBUG_OPT_UNUSED_SECTIONS to prevent the linker from removing
any code. (Preserving previous behaviour.) This can be removed again
at some point after making sure that corresponding linker script
only removes code that is truly unused.
Signed-off-by: Kerogit <kr.git@kerogit.eu>
This patch adds definitions for listed chips. No other changes are needed
as the chips are similar to the previously supported AVR128DA28 and all
that is needed is some definitions for extra peripherals.
AVR DA/DB family chips have single interrupt vector for all changes
on an I/O port. This poses problem when multiple drivers want to claim
the same interrupt (might happen for example with button and discrete
joystick drivers using pins on the same port.)
The I/O multiplexer solves it by providing interface similar
to irq_attach. However, it allows registration of multiple handlers
for the same interrupt vector with additional information recording
which pins should be serviced by each handler.
Only handler for pins that triggered the interrupt is then called.
Initial support adds chip specific files like Kconfig, flags for the compiler,
and basic functionality like system timer. Some files are stubs derived
from corresponding ATmega files but without the functionality they are
supposed to add (to be done in later patches)
Part of the work is altered copies of corresponding files for ATMega MCUs.
Initially supported is AVR128DA28.
This patch marks host GCC toolchain option with ARCH_TOOLCHAIN_GCC,
enabling various other settings depending on it. One of the enabled
settings is DEBUG_OPT_UNUSED_SECTIONS.
This patch also adjusts compiler and linker flags based on the value
of DEBUG_OPT_UNUSED_SECTIONS so unused sections are removed
The code used subi instruction to decrement the Y pointer but this
instruction only affects a byte, not a word. Fixed it by using
pre-decrement in the LD instruction instead.
Renaming "modlib" to "libelf" is more in line with the implementation content,
which makes it easier for individual developers to understand the capabilities of this module.
CONFIG_LIBC_MODLIB -> CONFIG_LIBC_ELF
Signed-off-by: chao an <anchao.archer@bytedance.com>
test:
1.use mps3-an547 build helloxx as module and run it
2.use qemu-armv7a:knsh test kernel build helloxx and run it
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
