Upperhalf supports multiple working modes at the same time,
which is specified by NIC when register
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Ref: https://man7.org/linux/man-pages/man7/packet.7.html
1. For `socket(AF_PACKET, int socket_type, int protocol)`: When `protocol` is set to `htons(ETH_P_ALL)`, then all protocols are received. If `protocol` is set to zero, no packets are received.
2. For `bind`: `bind` can optionally be called with a nonzero `sll_protocol` to start receiving packets for the protocols specified.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
When tcb may has been released in caller, the return pointer to tcb->name is dangling pointer. So add a buffer in caller, even if tcb is released, buffer is still valid.
Signed-off-by: wangzhi16 <wangzhi16@xiaomi.com>
The clang compiler has also defined `__GNUC__`, which can't be used to
decide the compiler version.
And the version used to decide whether the builtin function
`__builtin_dynamic_object_size` exist is not correct.
Signed-off-by: chenxiaoyi <chenxiaoyi@xiaomi.com>
1. We add default PCP because some of our apps may not want to set PCP
manually (e.g. Our user may just ping with pre-set PCP)
2. The `vlan_qos` is used as PCP when setting Linux's priority mapping:
https://github.com/torvalds/linux/blob/v6.12/net/8021q/vlan.c#L590
Although `vlan_qos` is not used when creating VLAN on Linux, we can
use it as PCP on creating VLAN (without changing its meaning), and
keep compatible with Linux's creating (Exactly the same when
`vlan_qos` is 0).
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Inspired by Linux's way, we also create VLAN devices for managing VLAN,
which will become interfaces like `eth0.58`.
QinQ is also supported, we can create VLAN devices above another VLAN
devices, like `eth0.100.101` (or even `eth0.1.2.3.4`, also supported on
Linux).
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
As pull request apache#17200 & apache#17368 introduced support for scheduling sleep, a documentation is needed for different sleep interfaces.
This patch adds the description for sleep interfaces currently provided in NuttX, including Scheduled sleep(nxsched_sleep()...), Signal-scheduled sleep(nxsig_sleep()...), and Busy sleep(up_udelay()).
Signed-off-by: Haokun Dong <donghaokun@lixiang.com>
Add support for the page erase (PE), sector erase (SE) and chip erase
(CE) dedicated commands on supported devices.
They can be triggered using the corresponding IOCTL commands
EEPIOC_PAGEERASE, EEPIOC_SECTORERASE and
EEPIOC_CHIPERASE.
On unsupported devices, this is equivalent to writing a full page,
sector, or the entire EEPROM to 0xFF.
Signed-off-by: Antoine Juckler <6445757+ajuckler@users.noreply.github.com>
Add complete driver support for the QST QMI8658 6-axis IMU sensor featuring
3-axis accelerometer and 3-axis gyroscope with I2C interface and uORB
integration.
Key features implemented:
* Full I2C communication with configurable frequency (default 400kHz)
* Multiple accelerometer ranges (±2g, ±4g, ±8g, ±16g) and ODR settings
* Multiple gyroscope ranges (±16 to ±1024 dps) with high ODR support
* Low-pass filter configuration for both sensors
* Temperature sensing with 16-bit resolution
* Self-test capability for both accelerometer and gyroscope
* Calibration-on-demand support with offset registers
* FIFO buffer management (framework ready)
* Interrupt-driven and polling mode support
* Complete uORB integration with sensor_accel and sensor_gyro topics
Driver components added:
* Core driver implementation (qmi8658_uorb.c) with register operations
* Header file with register definitions and scale factors (qmi8658.h)
* Kconfig options for driver configuration and polling mode
* Build system integration (CMakeLists.txt, Make.defs)
* Comprehensive documentation with API reference and usage examples
The driver follows NuttX sensor framework conventions and provides
robust error handling, mutex protection, and comprehensive debugging
support through CONFIG_DEBUG_SENSORS.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Replace the pipe() macro definition with a proper function implementation
to improve POSIX compliance and debugging capabilities. The new pipe()
function serves as a wrapper around pipe2() with flags set to 0.
Changes include:
- Convert pipe() from macro to function declaration in unistd.h
- Add lib_pipe.c implementation file with proper function documentation
- Update build system files (CMakeLists.txt and Make.defs) to include
the new source file when CONFIG_PIPES is enabled
- Add pipe() entry to libc.csv for symbol tracking
This change allows for better debugging, proper symbol resolution,
and follows NuttX coding standards for library function implementations.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Introduce the nxched_nanosleep() API to provide a lightweight
nanosecond-level sleep based on nxsched_ticksleep().
This API offers the same functionality as nxsig_nanosleep() but without
signal-related overhead, making it suitable for implementing libc
sleep() or usleep() when signals are disabled.
Signed-off-by: Chengdong Wang wangchengdong@lixiang.com
Add EEPIOC_SETSPEED ioctl acting like the MTDIOC_SETSPEED ioctl. The
default frequency is settable in the Kconfig.
Add xx25xx SPI delay control configurations.
Signed-off-by: Antoine Juckler <6445757+ajuckler@users.noreply.github.com>
This adds ability for read and write operations to work with messages
aligned to configured number of bytes. This has few different use
cases.
The alignment is specified as unsigned integer and can be changed with
ioctl command CANIOC_SET_MSGALIGN. The current value can be queried by
CANIOC_GET_MSGALIGN command.
The default value for the message alignment is 1. This will provide
behavior consistent with current one. Thus messages are placed to the
buffer right after data of the previous one. The same applies for
writes.
The special alignment value 0 disables read and write of multiple frames. Thus
read will always return at most one message and write will always write
only one message even if larger buffer size is provided.
Another use case is if message alignment is set to exactly message
representation size (`sizeof(struct can_msg_s)`). This allows writing
and reading arrays of messages.
Other values provide even more advanced and specialized use cases, such
as optimizations if architecture has to emulate some non-aligned
accesses, there alignment of for example 4 bytes could provide
performance boost.
The original motivation behind this is was compatibility with socket
CAN. It is easier to port applications to NuttX's CAN driver if only one
frame is provided at the time. This solution was suggested by Pavel Pisa
<pisa@fel.cvut.cz> as a more versatile variant of plain boolean
disabling the multiple frame retrieval.
Signed-off-by: Karel Kočí <kkoci@elektroline.cz>
This is just a simple typo (missing underscore) in the definition. I am
fixing the documentation instead to make it consistent instead of
breaking an API.
Signed-off-by: Karel Kočí <kkoci@elektroline.cz>
These macros are commonly provided on BSD systems. They are not part of
C nor POSIX but these types of operations can be required in drivers
implementation as well as in user space. The operations themself are
simple but kind of cryptic when placed in the code as is. Thus having
macro with an appropriate name is beneficial.
The use of BSD naming here is only to cling to at least some other
implementation instead of creating completelly NuttX specific one.
Kudos to @hartmannathan for the source code documentation.
Signed-off-by: Karel Kočí <kkoci@elektroline.cz>
Current timer hardware supports both absolute and relative count timers. Without an absolute count timer interface, setting an alarm timer might incur additional overhead in obtaining the current time, resulting in performance degradation and inaccurate timing.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
This commit introduce new clockdevice interfaces for oneshot.
- It can represent both `timer` and `alarm`.
- It simplifies the implementation of timer driver. Timer driver do not need considering the time conversion between clock count, tick and timespec.
- It sets timer align to the tick boundary to improve timer accuracy.
- It can avoid using 64-bit division during timer expiration interrupt, improves performance and reduces interrupt latency.
- It considers almost all multiplication overflow problems in time conversion without processing at the driver.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
Adds a device ID to ee25xx_initialize, which is stored in the
ee25xx_dev_s structure. This ID is used when calling SPI_SELECT.
The implementation is based on the handling of the chip select in
mtd/ramtron.c
This change is NOT backward compatible: the function signature has changed
Signed-off-by: Antoine Juckler <6445757+ajuckler@users.noreply.github.com>
Adds a device ID to at25ee_initialize, which is stored in the
at25ee_dev_s structure. This ID is used when calling SPI_SELECT.
The implementation is based on the handling of the chip select in
mtd/ramtron.c
This change is NOT backward compatible: the function signature has changed
Signed-off-by: Antoine Juckler <6445757+ajuckler@users.noreply.github.com>
This commit added the clkcnt abstraction.
Clkcnt is used to abstract the cycle counter of hardware timer, which can represent almost all existing timers. Time conversion through API provided by clkcnt can avoid any timing conversion problem (multiplication overflow, division precision loss, etc.).
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
This commit added support for pure function attributes and compile-time
constant condition.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
Make g_system_ticks a static variable, as it is only accessed by
clock_get_sched_ticks().
This change improves code modularity and enhances safety, since
clock_get_sched_ticks() performs proper synchronization when
reading g_system_ticks.
Signed-off-by: Chengdong Wang wangchengdong@lixiang.com
It acts as register_driver but also populates the inode size.
This allows to return a non-zero size when calling stat() on an eeprom
driver.
The conditions (CONFIG_PSEUDOFS_FILE or CONFIG_FS_SHMFS) for the
declaration of the inode size field have also been removed so that other
drivers can populate this field in the future.
Signed-off-by: Antoine Juckler <6445757+ajuckler@users.noreply.github.com>
This patch introduces wd_restart_next(), which enables precise and
convenient watchdog restarts upon expiration. It is designed to be
invoked within the watchdog expiration callback to facilitate accurate
periodic events.
Signed-off-by: Chengdong Wang <wangchengdong@lixiang.com>
Introduce wd_restart() to allow restarting an existing watchdog
with its previously configured callback and argument, making it
easier to refresh or reuse preconfigured watchdog timers.
Signed-off-by: Chengdong Wang <wangchengdong@lixiang.com>
