The -D_FILE_OFFSET_BITS=64 parameter is missing
during the CMake compilation of the sim (simulator) build,
which causes incorrect version invocations of interfaces
such as hostfs_stat.
Signed-off-by: guohao15 <guohao15@xiaomi.com>
After processing a packet of data, do not exit interrupt, but continues
to check whether there is data to be processed. If there is, continue
processing.
Signed-off-by: yangsong8 <yangsong8@xiaomi.com>
when start multiple sim, the host refuses to recognize multiple USB
devices, and the prompt message is as follows:
[365652.175289] UDC core: USB Raw Gadget: couldn't find an available UDC or it's busy
[365652.175304] misc raw-gadget: fail, usb_gadget_probe_driver returned -16
Signed-off-by: yangsong8 <yangsong8@xiaomi.com>
This commit fixed oneshot driver to work with both signal and sleep.
Signed-off-by: chenxiaoyi <chenxiaoyi@xiaomi.com>
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
Many times, context switching does not occur when the thread stack
memory is almost exhausted, so we need to mofify up_check_tcbstack to
accurately detect it.
Co-authored-by: Chengdong Wang <wangchengdong@lixiang.com>
Signed-off-by: guoshengyuan1 <guoshengyuan1@xiaomi.com>
Complete the missing scheduling information in some architectures
In these architectures (riscv, avr, tricor) context switching
can occur in both up_switch_context and xx_doirq
Co-authored-by: yinshengkai <yinshengkai@xiaomi.com>
Signed-off-by: guoshengyuan1 <guoshengyuan1@xiaomi.com>
Replace all nxsched_suspend/resume_*** with nxsched_switch_context
Delete nxsched_resume_scheduler in up_exit and call it uniformly in task_exit
Co-authored-by: yinshengkai <yinshengkai@xiaomi.com>
Signed-off-by: guoshengyuan1 <guoshengyuan1@xiaomi.com>
These archs only align the size of the stack, forgeting to do the
stack start addr alignment, this patch fixes it.
Signed-off-by: Chengdong Wang <wangchengdong@lixiang.com>
Sim use coroutine base on one thread in host to do switch context. but if we allow switch context with in one API (host-API and errno get), maybe the switch context from coroutine cause re-enter host-API call. Make the errno get behavior not work as expected.
Signed-off-by: guanyi3 <guanyi3@xiaomi.com>
Fix case for CAN character driver in simulator when CANFD is disabled
and ch_edl field is not present in CAN header.
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
Add CAN support for sim target based on host SocketCAN interface.
Tested with virtual CAN on Linux but should work also with hardware CAN cards supported by host.
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
Renaming "modlib" to "libelf" is more in line with the implementation content,
which makes it easier for individual developers to understand the capabilities of this module.
CONFIG_LIBC_MODLIB -> CONFIG_LIBC_ELF
Signed-off-by: chao an <anchao.archer@bytedance.com>
Summary:
- Unified the specification of LLVM architecture and ABI types across the CMake and Makefile configurations.
- Introduced `LLVM_ARCHTYPE` and `LLVM_CPUTYPE` variables in the CMake configuration to match the Makefile's approach.
- Standardized the ABI type (`LLVM_ABITYPE`) to `sysv` for both Linux and macOS host configurations.
Impact:
- Ensures consistent LLVM target definitions across build systems (CMake and Makefile).
- Simplifies future maintenance by avoiding divergence in LLVM-related configurations.
- No functional changes to the build output; only the internal representation of LLVM target information is aligned.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
add sim_rpmsg_port_uart.c to verify the rpmsg port uart wrapper layer,
The physical transport layer could be:
1. SIM_RAM_UART(current)
2. SIM_UART(through "socat" virtual "/dev/pts/*", "socat" could monitor the bus data)
Signed-off-by: chao an <anchao.archer@bytedance.com>
It will be used to distinguish between hardware KASan and software KASan. Hardware KASan does not need to use plug-in
Signed-off-by: wangmingrong1 <wangmingrong1@xiaomi.com>
This commit cleans up redundant header file includes throughout the codebase.
The changes include:
- Removing duplicate #include directives that were present in the same file
- Consolidating includes that were split across multiple lines unnecessarily
- Removing unused includes that were no longer needed
- Fixing some formatting issues with includes
The changes improve code organization and maintainability by:
- Reducing unnecessary dependencies
- Making include dependencies more explicit
- Following consistent include patterns
- Removing dead code
No functional changes are made - this is purely a code cleanup commit.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Inline & inline_function both used make confuze, let's modify all inline
in irq.h to inline_function, also clear the always_inline_funcion
declaration.
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
