In order to reduce code duplication, use the eeprom/spi_xx25xx
driver within mtd/at25ee.
The eeprom/xxx.h includes have been merged into eeprom/eeprom.h, to
provide a common include file like mtd/mtd.h.
Signed-off-by: Antoine Juckler <6445757+ajuckler@users.noreply.github.com>
Inspired by Linux's way, we also create VLAN devices for managing VLAN,
which will become interfaces like `eth0.58`.
QinQ is also supported, we can create VLAN devices above another VLAN
devices, like `eth0.100.101` (or even `eth0.1.2.3.4`, also supported on
Linux).
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Add complete driver support for the QST QMI8658 6-axis IMU sensor featuring
3-axis accelerometer and 3-axis gyroscope with I2C interface and uORB
integration.
Key features implemented:
* Full I2C communication with configurable frequency (default 400kHz)
* Multiple accelerometer ranges (±2g, ±4g, ±8g, ±16g) and ODR settings
* Multiple gyroscope ranges (±16 to ±1024 dps) with high ODR support
* Low-pass filter configuration for both sensors
* Temperature sensing with 16-bit resolution
* Self-test capability for both accelerometer and gyroscope
* Calibration-on-demand support with offset registers
* FIFO buffer management (framework ready)
* Interrupt-driven and polling mode support
* Complete uORB integration with sensor_accel and sensor_gyro topics
Driver components added:
* Core driver implementation (qmi8658_uorb.c) with register operations
* Header file with register definitions and scale factors (qmi8658.h)
* Kconfig options for driver configuration and polling mode
* Build system integration (CMakeLists.txt, Make.defs)
* Comprehensive documentation with API reference and usage examples
The driver follows NuttX sensor framework conventions and provides
robust error handling, mutex protection, and comprehensive debugging
support through CONFIG_DEBUG_SENSORS.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Add documentation describing the purpose and behavior of early_syslog(),
which provides a minimal logging facility available during early system
initialization or system down.
Signed-off-by: Chengdong Wang wangchengdong@lixiang.com
The GNSS lower-half driver for facilitating the implementation of uORB
GPS/GNSS device drivers was lacking documentation. Contributors cannot
be expected to implement their drivers correctly with this framework if
it is undocumented. This change adds documentation for how to use the
lower-half GNSS driver, provides an example and also adds a notice for
users to use this framework if implementing their own GNSS driver.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
This commit removes the termios dependency of the command to set fix
rate. It makes the MINMEA dependency present in the Kconfig options for
the driver, and it also adds a retry limit to the boot message
verification of 3 times. The documentation has been updated to reflect
the correct signature for the registration function and fix some
formatting.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
This commit adds the lowerhalf driver support for the I2C Slave.
While not currently ideal, it is compatible with the upperhalf i2c slave driver.
A workqueue can be used to delegate the isr work to the upperhalf driver.
But keep in mind wq introduces a lot of delay and in certain scenarios,
it is better to write your own better upperhalf driver.
Signed-off-by: Stepan Pressl <pressl.stepan@gmail.com>
Introduces two documentation additions. First, the RFC 5424 support is
documented on the main syslog documentation page, with information about
how to use it effectively. Second is the application documentation for
the `syslogd` application addition, which enables easy use of the new
RFC 5424 support.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
This patch adds support for the NAU7802 24 bit ADC from Nuvoton.
Please read the documentation for more details.
Signed-off-by: Daniel Byshkin <online@bskdany.com>
Adds support for the LSM6DSO32 IMU by STM using the uORB framework. This
only contains limited support for the I2C interface, interrupt and
polling driven measurement and standard modes of operation (high
performance ODRs). Features like interrupts besides DRDY, filtering,
gesture recognition and acting as a bus master are not implemented.
Realization of cfi-flash driver.
Add the interfaces of intel and amd command sets.
Signed-off-by: zhengyu9 <zhengyu9@xiaomi.com>
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
update sensors documentation:
- add info about different sensor frameworks in one place
- fix headers style for sensors_uorb.rst: headers
- fix long lines for sensors_uorb.rst so it's possible to read this file in terminal IDE
- add code sections for sensors_uorb.rst
Signed-off-by: raiden00pl <raiden00@railab.me>
Change syslog API naming more reasonable:
1. rename syslog_channel() to syslog_channel_register()
2. rename syslog_channel_remove() to syslog_channel_unregister()
Signed-off-by: chao an <anchao@lixiang.com>
This slightly revised the USB host documentation and fixed typos
encountered in the document and some source files.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
support to control the opening or closing of the specified channel through the syslogmask command at runtime
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
