The defconfigs that select the ESP32-S3's WROOM-2-N32R8V module
contains an octal SPI flash chip and a octal SPIRAM module.
This commit updates the defconfig to avoid errors while booting the
device.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
SPI flash operation modes - Dual Output (dout), Dual I/O (dio),
Quad Output (qout), Quad I/O (qio) and Octal (opi) were not being
properly selected. This commit fixes this behavior and the device
is now able to boot and initialize the proper SPI flash mode.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
Support for development using STM32H750B-DK, including configuration of onboard memory, flash, etc., and configuration of LVGL runtime environment has been added.
Signed-off-by: liujp <liujp@xiaomi.com>
boards/arm: Add CMakeLists for the nucleo-l476rg.
Adds CMakeLists files for the STM32L4 architectures
and one of the development boards. Files are adapted
from the similar STM32F7 boards, but built to reflect
the existing Make.defs.
Signed-off-by: Kye Morton <pryre.dev@outlook.com>
This commit adds support for the BMP180 sensor on the
STM32F401RC-RS485 board and updates the board documentation
accordingly. It also enables the BMP180 UORB driver in the
STM32 common logic.
Signed-off-by: Rodrigo Sim <rcsim10@gmail.com>
This commit moves some internal libraries' .bss sections to the
external PSRAM chip, freeing internal memory for other usages. Note
that it is necessary to update `esp32s3-devkit:python` defconfig
otherwise it would fail to build.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
This commit fixed `fb_putc` for early-print.
- Modified fb_putc to return an int instead of void.
- Handled error cases where the character is not found by replacing it with a '.'.
- Ensured cursor position is updated correctly after each character is processed.
- Fixed above 4G framebuffer memory mapping.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
This commit enables the SPI Flash's MTD block driver. This block
driver enables testing the SPI Flash device without any associated
filesystems.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
This commit enables the SPI Flash's MTD block driver. This block
driver enables testing the SPI Flash device without any associated
filesystems.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
This commit enables the SPI Flash's MTD block driver. This block
driver enables testing the SPI Flash device without any associated
filesystems.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
This commit enables the SPI Flash's MTD block driver. This block
driver enables testing the SPI Flash device without any associated
filesystems.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
This commit enables the SPI Flash's MTD block driver. This block
driver enables testing the SPI Flash device without any associated
filesystems.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
This commit enables the SPI Flash's MTD block driver. This block
driver enables testing the SPI Flash device without any associated
filesystems.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
Use configuration CDCACM_DISABLE_TXBUF or CDCACM_DISABLE_RXBUF to choose
whether to use usb req buffer as the serial buffer. Since the default
value is n (not using req buf), the original configuration of buf is valid.
This reverts commit 21c8ed80bd.
This change adds support for the Pico ResTouch 2.8" LCD module to enhance display options for NuttX-based systems.
Signed-off-by: Zhu Zhongjie <zhongjiezhu1@gmail.com>
When enable both `DEV_GPIO` and `GPIO_LOWER_HALF` for a GPIO pin device for an I/O expander pin.
See esp32s3_gpio.c for more details.
Log
xtensa-esp32s3-elf-ld: /workspace/nuttx/staging/libboard.a(esp32s3_bringup.o):(.literal.esp32s3_bringup+0x14): undefined reference to `esp32s3_gpio_init'
xtensa-esp32s3-elf-ld: /workspace/nuttx/staging/libboard.a(esp32s3_bringup.o): in function `esp32s3_bringup':
/workspace/nuttx/boards/xtensa/esp32s3/common/board/esp32s3_bringup.c:409: undefined reference to `esp32s3_gpio_init'
Signed-off-by: wangjianyu3 <wangjianyu3@xiaomi.com>
Added initial support for Seeed Studio XIAO RA4M1 Board. Initial
support to NuttShell via Serial, gpio and userleds. Also two
configurations is available: nsh for basic NuttShell access and
combo for gpio and userleds.
Signed-off-by: Rodrigo Sim <rcsim10@gmail.com>
This PR adds support for the PINE64 Yuzuki Avaota-A1 SBC,
based on Allwinner A527 Arm64 SoC.
Most of the code was derived from NuttX for
QEMU Arm64 Kernel Build qemu-armv8a:knsh.
The modified code is explained here:
https://lupyuen.github.io/articles/avaota#appendix-port-nuttx-to-avaota-a1
Modified Files:
boards/Kconfig: Added Avaota-A1 board
New Files in boards/arm64/a527/avaota-a1:
src/a527_appinit.c: Startup Code
src/a527_boardinit.c: Init Code
src/a527_bringup.c: Bringup Code
src/a527_power.c: Power Off and Reset
src/avaota-a1.h: Board Declarations
include/board.h: Board Definitions
include/board_memorymap.h: Memory Map
scripts/ld.script, gnu-elf.ld: Linker Scripts
Makefile, scripts/Make.defs: Makefiles
CMakeLists.txt, src/CMakeLists.txt: CMakefiles
Kconfig: Avaota-A1 Config
configs/nsh/defconfig: Build Config for avaota-a1:nsh
Signed-off-by: Lup Yuen Lee <luppy@appkaki.com>
Change the ESP32S3-WROOM-2-N16R8V to ESP32S3-WROOM-1-N8R2.
Reason: not testing on 16MB but successfully tested smaller flash and PSRAM.
Also updated documentation on this defconfig.
Signed-off-by: Filipe Cavalcanti <filipe.cavalcanti@espressif.com>
