test:
1.use mps3-an547 build helloxx as module and run it
2.use qemu-armv7a:knsh test kernel build helloxx and run it
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
Unify liker scripts for all stm32f0l0g0.
This fixes crash due to unaligned access to rodata for these boards.
Signed-off-by: raiden00pl <raiden00@railab.me>
Support for development using STM32H750B-DK, including configuration of onboard memory, flash, etc., and configuration of LVGL runtime environment has been added.
Signed-off-by: liujp <liujp@xiaomi.com>
boards/arm: Add CMakeLists for the nucleo-l476rg.
Adds CMakeLists files for the STM32L4 architectures
and one of the development boards. Files are adapted
from the similar STM32F7 boards, but built to reflect
the existing Make.defs.
Signed-off-by: Kye Morton <pryre.dev@outlook.com>
This commit adds support for the BMP180 sensor on the
STM32F401RC-RS485 board and updates the board documentation
accordingly. It also enables the BMP180 UORB driver in the
STM32 common logic.
Signed-off-by: Rodrigo Sim <rcsim10@gmail.com>
Use configuration CDCACM_DISABLE_TXBUF or CDCACM_DISABLE_RXBUF to choose
whether to use usb req buffer as the serial buffer. Since the default
value is n (not using req buf), the original configuration of buf is valid.
This reverts commit 21c8ed80bd.
This change adds support for the Pico ResTouch 2.8" LCD module to enhance display options for NuttX-based systems.
Signed-off-by: Zhu Zhongjie <zhongjiezhu1@gmail.com>
Added initial support for Seeed Studio XIAO RA4M1 Board. Initial
support to NuttShell via Serial, gpio and userleds. Also two
configurations is available: nsh for basic NuttShell access and
combo for gpio and userleds.
Signed-off-by: Rodrigo Sim <rcsim10@gmail.com>
Implement functionality to mount the tmpfs file system during the bring-up process.
* Added conditional compilation for tmpfs support
* Included error logging for mount failures
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Add initial support for Seeed Studio XIAO RP2350 Board. Initial
support includes serial and usb NuttShell, and a combo
configuration for gpio, leds and ws2812.
Signed-off-by: Rodrigo Sim <rcsim10@gmail.com>
I found that the gpio example code can't be tested on nrf5340-dk.
Enabling CONFIG_DEV_GPIO wouldn't register gpio pins as /dev/gpio*.
NRF5340-dk has 4 LEDs and 4 User Buttons.
By setting CONFIG_DEV_GPIO=y,
- 4 LEDs will be configured as GPIO outputs
- 2 Buttons as GPIO inputs, and
- 2 Buttons as GPIO interrupt inputs
This PR will allows user to test GPIO examples on NRF5340-dk board.
Signed-off-by: Aung Khant Maw <aungkhantmaw64@gmail.com>
add discard-data=on in proxy launch command, so the proxy side
will clean the share memory to make sure that the shared memory is clean
every time server and proxy are started.
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
Summary
Board logic change.
This PR adds weak_function attributes to the RP2040 common SPI board logic.
This allows board developers to override and extend the SPI board logic.
Signed-off-by: Kevin Witteveen (MartiniMarter) <kevinwit1999@gmail.com>
Many STM32L4 boards are missing stm32_bringup.c. That confusion
was created when stm32_appinit.c was created. It introduced a new
way to do the board initialization without depending on NSH arch
specific initialization.
Signed-off-by: Alan C. Assis <acassis@gmail.com>
Many STM32L4 boards are missing stm32_bringup.c. That confusion
was created when stm32_appinit.c was created. It introduced a new
way to do the board initialization without depending on NSH arch
specific initialization.
Signed-off-by: Alan C. Assis <acassis@gmail.com>
Many STM32L4 boards are missing stm32_bringup.c. That confusion
was created when stm32_appinit.c was created. It introduced a new
way to do the board initialization without depending on NSH arch
specific initialization.
Signed-off-by: Alan C. Assis <acassis@gmail.com>
Many STM32L4 boards are missing stm32_bringup.c. That confusion
was created when stm32_appinit.c was created. It introduced a new
way to do the board initialization without depending on NSH arch
specific initialization.
Signed-off-by: Alan C. Assis <acassis@gmail.com>
Many STM32L4 boards are missing stm32_bringup.c. That confusion
was created when stm32_appinit.c was created. It introduced a new
way to do the board initialization without depending on NSH arch
specific initialization.
Signed-off-by: Alan C. Assis <acassis@gmail.com>
This adds minimal support for NXP MCX-N236 CPU. Peripherals supported are:
- GPIO
- PINMUX
- CLOCK
- LPUART
An example board, FRDM-MCXN236 is also added, with a basic profile that
boots into nsh.
Signed-off-by: Ville Juven <ville.juven@unikie.com>
boards/nucleo-f302r8/cansock: enable SocketCAN utils, so user can easly use CAN tools.
This board has only 64KB of FLASH which requires some additional optimization to fit CAN tools on it.
Signed-off-by: raiden00pl <raiden00@railab.me>
This adds initial bootable PROTECTED mode config `qemu-armv7r:pnsh`,
more tests are still needed. Flat mode config qemu-armv7r:nsh still
works.
- The nuttx.ld is for building nuttx ELF
- The nuttx_user.ld is for building nuttx_user ELF
They both include the memory.ld with preprocessing.
To run, use the QEMU mentioned in PR:
```sh
$ qemu-system-arm -M virt -semihosting -nographic -cpu cortex-r5f \
-device loader,file=nuttx_user -device loader,file=nuttx
```
Signed-off-by: Yanfeng Liu <p-liuyanfeng9@xiaomi.com>
This aligns linker script file name with built program name so that
nuttx.ld helps to build nuttx ELF
Signed-off-by: Yanfeng Liu <p-liuyanfeng9@xiaomi.com>
boards/nucleo-g431rb: fix CAN bit timings, calculated with https://phryniszak.github.io/stm32g-fdcan/
also update bit rate to 250000 so it's the same as for other stm32 boards
Signed-off-by: raiden00pl <raiden00@railab.me>
