Add support for the QMI8658 6-axis IMU sensor (accelerometer + gyroscope)
on the lckfb-szpi-esp32s3 board.
Changes:
- New esp32s3_qmi8658.c driver initializes sensor on I2C0 at address 0x6A
- Registers uORB devices: /dev/uorb/sensor_accel0 and /dev/uorb/sensor_gyro0
- Adds esp32s3_qmi8658_initialize() function declaration to header
- Integrates with board bringup when CONFIG_SENSORS_QMI8658=y
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Support for hardware accelerated HMAC-SHA(1/256) for ESP32
was added, this commit updates the documentation to reflect
this as well.
Signed-off-by: Vlad Pruteanu <pruteanuvlad1611@yahoo.com>
Introduce EXT1 wakeup functionality to the ESP32-S3 power management
subsystem. With this feature, the ESP32-S3 can wake up from PM_STANDBY
or PM_SLEEP when one or more RTC GPIOs trigger the EXT1 condition.
Changes include:
- Added EXT1 wakeup configuration and preparation logic in rtc code.
- Integrated EXT1 handling in pmstandby() and pmsleep().
- New board-level Kconfig options under ESP32-S3 DevKit menu:
- CONFIG_PM_EXT1_WAKEUP: enable EXT1 wakeup support
- CONFIG_PM_EXT1_WAKEUP_RTC_GPIO<n>: select RTC GPIOs as wake sources
- CONFIG_PM_EXT1_WAKEUP_TRIGGER_MODE: choose wakeup on HIGH or LOW level
- Fixing Kconfig style
- Fixing comments standard
- Adding PM documentation for esp32s3-devkit
Impact:
- No build impact unless CONFIG_PM_EXT1_WAKEUP is enabled.
- When enabled, ESP32-S3 can wake from low-power states via RTC GPIOs.
- No new public API introduced; controlled via board Kconfig.
Tested on ESP32-S3 DevKit:
- Configured GPIO4 and GPIO5 as EXT1 wake sources.
- Verified wakeup from light sleep and deep sleep on external signals.
- Wakeup reason correctly reported as EXT1.
Signed-off-by: Thiago Finelon <thiago.sfinelon@gmail.com>
- Added esp32s3_board_spislavedev.c with board-level SPI slave logic
- Added esp32s3_board_spislavedev.h public header in common/include
- Updated Make.defs to include the new source when CONFIG_SPI_SLAVE_DRIVER=y
- Adding spislv board config to esp32s3-devkit
- Adding documentation of esp32s3 devkit spi slv
- Fixing path include in esp32s3_board_spislavedev.c
- Fixing relative path in the header of esp32s3_board_spislavedev.h
- Removing neasted check in Make.defs, consistency reasons
This provides initial support for SPI slave device initialization
on ESP32-S3 boards, making the feature available under conditional
build configuration.
Signed-off-by: Thiago Finelon <thiago.sfinelon@gmail.com>
This enables the use of the cryptographic accelerator within
the ESP32. The support algorithms are: SHA1, SHA256, SHA384
and SHA512.
Signed-off-by: Vlad Pruteanu <pruteanuvlad1611@yahoo.com>
This updated the command used for running the openocd-esp32 for
all the supported Espressif's SoCs. It enables using SW-defined
breakpoints.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
Change the ESP32S3-WROOM-2-N16R8V to ESP32S3-WROOM-1-N8R2.
Reason: not testing on 16MB but successfully tested smaller flash and PSRAM.
Also updated documentation on this defconfig.
Signed-off-by: Filipe Cavalcanti <filipe.cavalcanti@espressif.com>
Modify addressing to allow only 2 byte node address.
Allow modifying the node address by modifying the ipv6 address
(the ipv6 address has a direct relation with the node address)
Introduce the option to add a 4 byte random number to the mac header
as a preparation for ciphered data exchange.
Introduce a FCB (frame control byte) as a replacement for the INFO
field in the mac header.
Update esp32-devkitc:espnow config to reflect address size change.
Update the documentation to reflect address size changes.
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
