This commit updates the common-source integration for Xtensa-based
Espressif devices (ESP32, ESP32-S2, and ESP32-S3). This is part of a larger
common-source update split by architecture for better maintainability.
Major components updated:
- IRQ allocator refactoring with intr_alloc integration
- Common-source drivers (GPIO, RMT, I2C, SPI, UART, etc.)
- Espressif components upgrade to release/master.b-test
- Peripheral drivers (ADC, PWM, LEDC, MCPWM, PCNT, Temperature Sensor, etc.)
- Wireless adapters (Wi-Fi and BLE)
- esp_timer migration to the common-source path for Xtensa devices
- Common-source power management implementation (auto-sleep and wakeup paths)
- Board defconfigs for all Xtensa Espressif boards
- SMP support improvements for ESP32-S3
- Critical section handling improvements
Key architectural changes:
- IRQ Allocator: The new interrupt allocator enables multiple mapping
options from interrupt sources to CPU interrupts, providing flexibility
required by modern peripherals. Although this introduces breaking changes
to the interrupt handling API, the required ARCH_MINIMAL_VECTORTABLE
Kconfig option is explicitly checked during startup to ensure proper
configuration. This validation prevents runtime issues from configuration
mismatches.
- Xtensa-specific interrupt handling via esp_xtensa_intr.c providing
NuttX-native implementations of xt_ints_on/off and interrupt handlers,
avoiding conflicts with NuttX's core Xtensa macros.
- Timer/RTC unification: ESP32/ESP32-S2/ESP32-S3 move from chip-specific
RTC/RT-timer code to common-source Espressif integration, including
esp_timer_adapter/esp_rtc paths and the required bringup/defconfig updates.
- Power management consolidation: Xtensa PM follows the common-source
implementation, including common-source auto-sleep behavior, UART/Wi-Fi
wakeup coordination, and tickless-safe sleep flow compatibility.
Note: This is a large commit to maintain bisectability. Breaking the
changes into smaller commits would result in non-building intermediate
states across the common-source infrastructure update.
Tested configurations:
- All defconfigs were tested, including `ostest`.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
INT32_C(x) is currently defined as x ## ll on Xtensa, which
produces a long long int constant. However, int32_t is
defined as long int on this architecture.
This mismatch can break C++ template overload resolution
and causes build failures in downstream projects such as PX4.
Fix the macro by using x ## l so INT32_C expands to the same
underlying type as int32_t.
Signed-off-by: Adwait Godbole <adwaitngodbole@gmail.com>
Rename STACK_ALIGNMENT macro to STACKFRAME_ALIGN throughout the codebase
to provide clearer naming semantics. The new name better reflects the macro's
purpose of frame alignment rather than general stack alignment.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Add support to disable signals actions related struct
Co-authored-by: guoshichao <guoshichao@xiaomi.com>
Signed-off-by: Chengdong Wang <wangchengdong@lixiang.com>
The architecture defines maximum of 128 interrupts, whereas previous
code only supported 32 interrupts. For every 32 interrupts added,
there are three additional registers: INTERRUPT, INTCLEAR, and INTENABLE.
This patch adds support for handling these registers.
Signed-off-by: chenxiaoyi <chenxiaoyi@xiaomi.com>
Modify types.h and inttypes.h to use the correct _int32_t and _uint32_t types.
Type is now defined according to recent compiler versions.
Signed-off-by: Filipe Cavalcanti <filipe.cavalcanti@espressif.com>
Relocate the enum ota_img_ctrl_e and ota_img_bootseq_e
to a directory visible to the application.
Inspect if the MTD partition (factory/ota_0/ota_1) is mapped as text.
Adding an ioctl interface ota_invalidate_bootseq() to the ESP32 partitions,
by deleting the corresponding otadata, makes the boot sequence (ota_0/1) invalid.
Signed-off-by: nuttxs <zhaoqing.zhang@sony.com>
Inline & inline_function both used make confuze, let's modify all inline
in irq.h to inline_function, also clear the always_inline_funcion
declaration.
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
reason:
up_set_current_regs initially had two functions:
1: To mark the entry into an interrupt state.
2: To record the context before an interrupt/exception. If we switch to a new task, we need to store the upcoming context regs by calling up_set_current_regs(regs).
Currently, we record the context in other ways, so the second function is obsolete. Therefore, we need to rename up_set_current_regs to better reflect its actual meaning, which is solely to mark an interrupt.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
1. add IS_ALIGNED() definitions for NuttX;
2. replace all the ALIGN_UP() and ALIGN_DOWN() to use common
align implementation;
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
Some app with same code runs on different cores in AMP mode,
need the physical core on which the function is called.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Signed-off-by: fangxinyong <fangxinyong@xiaomi.com>
- Fix `MAKE_PC_FROM_RA` macro to consider the instruction region
base address;
- Add sanity check for calculated PC and SP registers;
- Check if the stack pointer is within the interrupt stack to
enable backtrace dump if an exception occurs during the ISR;
This defconfig is an example of the recorded stack and it became
faulty recently after the implementation of the `up_current_regs`
functions. The `noinstrument_function` directive must be used for
preventing it from being looped when instrumentation is enabled.
Also, this commit places `sched/instrument/stack_record.c` in IRAM.
reason:
1 On different architectures, we can utilize more optimized strategies
to implement up_current_regs/up_set_current_regs.
eg. use interrupt registersor percpu registers.
code size
before
text data bss dec hex filename
262848 49985 63893 376726 5bf96 nuttx
after
text data bss dec hex filename
262844 49985 63893 376722 5bf92 nuttx
size change -4
Configuring NuttX and compile:
$ ./tools/configure.sh -l qemu-armv8a:nsh_smp
$ make
Running with qemu
$ qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic \
-machine virt,virtualization=on,gic-version=3 \
-net none -chardev stdio,id=con,mux=on -serial chardev:con \
-mon chardev=con,mode=readline -kernel ./nuttx
Signed-off-by: hujun5 <hujun5@xiaomi.com>
The Simple Boot feature for Espressif chips is a method of booting
that doesn't depend on a 2nd stage bootloader. Its not the
intention to replace a 2nd stage bootloader such as MCUboot and
ESP-IDF bootloader, but to have a minimal and straight-forward way
of booting, and also simplify the building.
This commit also removes deprecated code and makes this bootloader
configuration as default for esp32s3 targets and removes the need
for running 'make bootloader' command for it.
Other related fix, but not directly to Simple Boot:
- Instrumentation is required to run from IRAM to support it during
initialization. `is_eco0` function also needs to run from IRAM.
- `rtc.data` section placement was fixed.
- Provide arch-defined interfaces for efuses, in order to decouple
board config level from arch-defined values.
Signed-off-by: Almir Okato <almir.okato@espressif.com>
This commit provides an interface to register ISRs that run from
IRAM and keeps track of the non-IRAM interrupts. It enables, for
instance, to avoid disabling all the interrupts during a SPI flash
operation: IRAM-enabled ISRs are, then, able to run during these
operations.
It also makes the code look more similar to the ESP32-S3 SPI flash
implementation by creating a common `esp32_spiflash_init` that is
responsible to create the SPI flash operation tasks. The function
intended to initialize the SPI flash partions was, then, renamed to
`board_spiflash_init`.
This commit provides an interface to register ISRs that run from
IRAM and keeps track of the non-IRAM interrupts. It enables, for
instance, to avoid disabling all the interrupts during a SPI flash
operation: IRAM-enabled ISRs are, then, able to run during these
operations.
The low-level Wi-Fi driver registers two peripheral interrupts to
the same CPU interrupt. Although the registered ISR is the same for
both peripherals interrupt, it's needed to call `up_enable_irq` to
ensure that the interrupt matrix is being set accordingly.
Please note that the current implementation of the ESP32-S3's IRQ
driver - although allow us to set a callback for each IRQ, which
represents the peripherals interrupt - doesn't allow us to call
both callbacks when these IRQs refers to a same CPU interrupt.
`g_cpu0_intmap` (or `g_cpu1_intmap`) associates each CPU interrupt
to a single IRQ/peripheral and, then, when a CPU interrupt is
triggered, only the last registered IRQ's callback will be called.
This isn't a problem here because 1) the registered callback is the
same for both IRQ's (in fact, it considers the CPU interrupt) and
2) we know in advance which peripheral interrupts will be attached
to which CPU interrupt and, then, we can set them directly.
- Fix macro values from `arch/xtensa/include/esp32s3/irq.h`
- Remove references to unexisting edge-triggered CPU interrupts
- Add `esp32s3_getirq` to get IRQ based on core and the `cpuint`
