After adding the cross-core crypto driver, there are now three encryption modes:
1. Hardware driver in local core
2. Crypto driver in remote core
3. Software encryption in local core
This prioritizes local hardware driver first, then remote driver (typically hardware),
and finally local software encryption as a fallback.
Signed-off-by: makejian <makejian@xiaomi.com>
Replace dynamic memory allocation with stack-based variables in cryptodev_op().
This eliminates kmm_malloc/kmm_free overhead and simplifies error handling
by removing the need for goto bail cleanup paths.
Signed-off-by: makejian <makejian@xiaomi.com>
Add ivlen field to crypt_op and crp_ivlen to cryptop structure to support
cipher algorithms with different IV lengths.
Signed-off-by: makejian <makejian@xiaomi.com>
Add olen field to crypt_op structure and crp_olen to cryptop structure
to support output length tracking in virtio crypto mode.
Signed-off-by: makejian <makejian@xiaomi.com>
Add pid field to task_info_s and move getpid() implementation to user
space TLS access. Remove getpid from syscall interface as it now returns
cached PID from thread local storage instead of kernel lookup.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Replace global enter_critical_section() calls with lightweight spinlock in
addrenv_switch() to reduce interrupt latency, and convert refs counter to
atomic_t for thread-safe reference counting without blocking operations.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Move stack alignment and kernel stack macros from architecture-specific internal
headers to public include/nuttx/irq.h. Consolidates duplicate definitions across
17 architecture families, reducing code duplication while enabling common code
to access these core alignment utilities without architecture dependencies.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Rename siphash related symbols to avoid conflicts with compiler-generated
section names. Tricore-gcc produces function sections with '_end' suffix,
which conflicts with siphash_end symbol.
Signed-off-by: makejian <makejian@xiaomi.com>
Already copy the rpmsg_internal.h from openamp to the nuttx/include,
so do not need add the include patch for .c files.
Signed-off-by: yangao1 <yangao1@xiaomi.com>
Signed-off-by: wangshaoxin <wangshaoxin@xiaomi.com>
The SRN number in TriCore far exceeds the PN number.
Using IRQ as the PN number would result in an overflow.
Therefore, MINIMAL_VECTORTABLE is used to ensure that
the PN number does not overflow.
Signed-off-by: zhangyuan29 <zhangyuan29@xiaomi.com>
Use share memory to send PANIC and RESET command to peer if the rptun
driver do not support panic() and reset ops.
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
Signed-off-by: ligd <liguiding1@xiaomi.com>
Support enable/disable the kasan when initialize the heap.
This requirement is from rptun, because rptun use share memory init
the heap and share memory is precious, so we need disable the kasan
feature for rptun's heap to save the share memory.
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
Signed-off-by: wangzhi16 <wangzhi16@xiaomi.com>
Support user pass it own heap struct to the mm_initialize_heap() to
avoid the heap struct is reserved from the heap range
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
Now rptun only as remoteproc and remoteproc_virtio transport layer,
because the rpmsg virtio device should be a stand alone virtio/vhost
driver in the virtio bus
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
This is the virtio-rpmsg and vhost-rpmsg common implementation for
VirtIO-Rpmsg: drivers/virtio/virtio-rpmsg.c
Vhost-Rpmsg: drivers/vhost/vhost-rpmsg.c
Later we will seperate the rpmsg virtio from the rptun framework to
make the rpmsg virtio can work with all the virtio transport layer.
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
Add support for storing driver-specific private data in the crypto
driver structure. This allows crypto drivers to maintain session
state and other driver-specific information.
Signed-off-by: makejian <makejian@xiaomi.com>
This commit is workaround for the list conflicts introduced by the wqueue and wdog. By spliting the list type definition and the list implementation, we can avoid the list conflicts with user-defined lists.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
Since lists are traversed sequentially in most cases, moving the next pointer before the prev pointer can optimize memory access on some architectures.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
Correct and clarify the documentation note for nxmutex_destroy function
to properly document behavior and safety considerations in OS context.
Signed-off-by: makejian <makejian@xiaomi.com>
The logic for obtaining the info and configuring the user buffer
have been optimized.
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
Signed-off-by: likun17 <likun17@xiaomi.com>
Remove deprecated group_exitinfo() function and related critical section locking
from binfmt_exec.c, moving module unload setup directly into exec_module() where
it integrates naturally with task activation, simplifying code flow and reducing
unnecessary synchronization overhead.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Signals in NuttX serve two primary purposes:
1. Synchronization and wake-up:
Signals can be used to block threads on specific signal sets and later
wake them up by delivering the corresponding signals to those threads.
2. Asynchronous notification:
Signals can also be used to install callback handlers for specific signals, allowing threads to
asynchronously invoke those handlers when the signals are delivered.
This change introduces the ability to disable all signal functionality to reduce footprint for NuttX.
Signed-off-by: Chengdong Wang wangchengdong@lixiang.com
Signals in NuttX serve two primary purposes:
1. Synchronization and wake-up:
Signals can be used to block threads on specific signal sets and later
wake them up by delivering the corresponding signals to those threads.
2. Asynchronous notification:
Signals can also be used to install callback handlers for specific signals, allowing threads to
asynchronously invoke those handlers when the signals are delivered.
This change introduces the ability to partially disable signal functionality: to disable only signal functions for
Asynchronous notification, keeping functions for Synchronization and wake-up.
This enables finer-grained control over signal usage while preserving existing behavior for supported use cases.
Co-authored-by: Guo Shichao guoshichao@xiaomi.com
Signed-off-by: Chengdong Wang wangchengdong@lixiang.com
Add key management interfaces and support for generating key pairs in RSA and ECDSA cryptographic processes to the cryptodev module.
Signed-off-by: makejian <makejian@xiaomi.com>
To ensure consistency, in all places where the "sendmsg" function is used
either directly or indirectly, the type of the "struct msghdr *msg" parameter
needs to be modified to "const struct msghdr *msg".
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
The notifier doesn't need to hold the critical section for the entire
operation, allowing for better performance and reduced lock contention
on multi-core systems.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
When cross-compiling PSE52 VSX testcases based on Vela, VSX defines its
own "OK" constant as a macro, which conflicts with the "OK" constant
defined as an enum in <sys/types.h>. To ensure compatibility, we
have undef'd the macro version of "OK" in advance.
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
Add three POSIX‑required pthread‑related constants to limits.h:
- _POSIX_THREAD_DESTRUCTOR_ITERATIONS
- _POSIX_THREAD_KEYS_MAX
- _POSIX_THREAD_THREADS_MAX
These constants are needed for full POSIX pthread compatibility and are
required by certain PSE52 test suites and applications.
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
implement the ulimit() based on getrlimit/setrlimit function.
the ulimit() function is requiredd by vsx testset
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
Rename imr_interface to imr_address in struct ip_mreqn to match the Linux definition.
This ensures compatibility with standard socket APIs and existing Linux applications.
Signed-off-by: daichuan <daichuan@xiaomi.com>
It's the first simple version of rpmsg-net, include:
- Transfer command with data copy (maybe optimize later), no need to ack
- Control command with ack, but only ifup/ifdown no need to ack
- Client side: Another module can call `net_rpmsg_drv_alloc` to
create netdev and register it.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
expose the query interface of the network card to the network card
driver so that the network card driver can support more features.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
1. According to the POSIX specification, the functions `pthread_kill`
and `pthread_sigmask` have been moved from `pthread.h` to `signal.h`.
2. As required by the POSIX standard, the pthread-related constants
have been relocated from `pthread.h` to `sys/types.h`.
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
Extend AES-CBC algorithm support to include 192-bit and 256-bit key sizes in addition to the existing 128-bit support. This enables broader compatibility with cryptographic standards and provides applications with additional key length options for enhanced security requirements.
Signed-off-by: makejian <makejian@xiaomi.com>
The TCB initializes the pid early, but the argvstack is not initialized
at that time. This may cause invalid addresses to be obtained when
nxsched_get_stackargs is called during task enumeration.
Initialize the argv pointer to NULL to enable safe validity checks.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
