Rename atomic_fetch_add/sub/or/and/xor to atomic_add/sub/or/and/xor
to avoid conflicts with the C/C++ standard library naming. The
atomic_fetch_xxx naming is reserved by the standard; keeping it causes
function name conflicts when source files indirectly include both
<nuttx/atomic.h> and <atomic>/<stdatomic.h>.
Signed-off-by: zhangyu117 <zhangyu117@xiaomi.com>
In a kernel or protected build vfork() is reached through a system call, so
the return address and stack pointer that the entry point in
arm64_fork_func.S can snapshot for itself belong to the kernel-side stub, not
to the caller. A child built from that snapshot resumes at a kernel address
on a kernel stack. This is why arm64 selected the fork family only for the
flat build.
Record what the caller was actually doing instead. arm64_sync_exc passes the
exception frame to dispatch_syscall() in x7 -- x0-x6 carry the call number and
its six parameters, so x7 is free -- and dispatch_syscall() stores it in
xcp.sregs, mirroring what riscv_swint.c does.
arm64_fork() then chooses where the caller's registers live:
arm64_fork_syscall() when TCB_FLAG_SYSCALL is set, rebuilding the child
from xcp.sregs so that it returns from the very same
SVC as the parent;
arm64_fork_direct() otherwise, which is the flat build and any kernel
thread that calls the entry point as a plain function.
The stack copy and the relocation of pointers into it are shared by both
paths in arm64_fork_stack() and arm64_fork_reloc().
With that in place ARCH_ARM64 can select ARCH_HAVE_VFORK unconditionally.
Verified on qemu-armv8a:knsh (BUILD_KERNEL), qemu-armv8a:nsh (BUILD_FLAT) and
qemu-armv8a:citest_smp under qemu-system-aarch64: ostest's vfork_test passes
on all three, and it was absent from knsh before the change. The protected
configurations are build-verified only (fvp-armv8r:pnsh), there being no
emulator for them here.
Assisted-by: Claude Code:claude-opus-5
Signed-off-by: Marco Casaroli <marco.casaroli@gmail.com>
NuttX implemented fork() and vfork() as the same function. Both were libc
wrappers around a single up_fork() syscall; vfork() differed only by a
trailing waitpid(). Underneath, the child joined the parent's address
environment -- the same addrenv_join() that pthread_create() uses -- and got
a private copy of the stack. So the child shared .data, .bss and the heap
with its parent and ran concurrently with it.
That is not fork(). It is vfork()-with-a-private-stack under fork()'s name,
and the history says so: today's fork() is NuttX's old vfork(), renamed in
c33d1c9c97 (2023) without any change of behaviour. The failure was silent --
a program written against POSIX fork() compiled, ran, and had its child's
writes land in the parent's variables.
Separate them into two primitives, chosen by which function the caller
called rather than by what the hardware happens to be:
fork() child gets its own copy of the parent's memory at the same
virtual addresses; runs concurrently. Only where an address
environment can be duplicated -- elsewhere it is not declared at
all, so calling it is a build error naming the function.
vfork() child shares the parent's memory; parent suspended until the
child _exit()s or exec()s. Implementable everywhere.
Below libc there is still one syscall. up_fork() gains a bool saying which
primitive the caller used, since the per-architecture register snapshot is
the same for both, and passes it to nxtask_setup_fork(), which is the single
place the memory semantics are decided. The argument arrives in the first
argument register and is never touched: each architecture's snapshot takes
some other call-clobbered register for its scratch, so the flag is simply
still there when the C worker is called.
The vfork() parent suspension moves out of libc into nxtask_start_fork(),
released from nxsched_release_tcb() by nxtask_resume_vfork(). Two things
follow: the parent is resumed at exec(), since exec_swap() has already handed
the child's pid to the loaded program by the time the vfork stub exits, and
vfork() no longer depends on CONFIG_SCHED_WAITPID.
Releasing there requires one fix in nxtask_exit(). It raises rtcb->lockcount
directly rather than through sched_lock() while it tears the TCB down, so the
nxsem_post() that wakes the vfork() parent leaves it queued where a blocked
task collects while pre-emption is off -- g_pendingtasks, or g_readytorun on
SMP -- and the matching raw lockcount-- does not publish it the way
sched_unlock() would, leaving the parent stranded with nothing to move it on.
The fix mirrors sched_unlock() for each case: nxsched_merge_pending(), or
nxsched_deliver_task() under CONFIG_SMP. Both are no-ops while pre-emption is
still disabled, and up_exit() re-reads this_task() afterwards, so a change of
the ready-to-run head is honoured. Without it vfork() deadlocks wherever no
other task happens to call sched_unlock() afterwards -- rv-virt:nsh64 and
rv-virt:pnsh64, where NSH is blocked in waitpid() holding the lock, and
qemu-armv8a:citest_smp, which hangs the moment the vfork() test runs.
fork() is built on a new addrenv_fork(), backed by an up_addrenv_fork() hook
that duplicates an address environment into freshly allocated pages mapped at
the same virtual addresses -- unlike up_addrenv_clone(), which copies only
the representation and leaves both pointing at the same page tables. The
child then adopts the parent's stack geometry rather than being given a
relocated copy: a pointer to a stack local taken before fork() must name the
same object in the child that it named in the parent, and the parent's stack
is already in the duplicate, with its contents, at the parent's address.
No architecture implements up_addrenv_fork() yet, so this commit leaves
fork() unavailable everywhere. That is the intended state. It withdraws
fork() from ARCH_ARM, flat ARCH_ARM64, ARCH_RISCV, ARCH_SIM and ARCH_X86_64,
where until now it named the sharing primitive; per-architecture patches
restore it, with POSIX semantics, as up_addrenv_fork() lands. In the
meantime the sharing primitive is still there under the name that describes
it: vfork() for a child that runs a program, pthread_create() for a second
flow of control that shares memory, posix_spawn() for both at once.
Kconfig: ARCH_HAVE_VFORK inherits ARCH_HAVE_FORK's select lines, conditions
included, so no configuration gains machinery; ARCH_HAVE_FORK is redefined to
mean "can provide POSIX fork() semantics" and now depends on ARCH_ADDRENV.
There is one deliberate departure from "verbatim". ARCH_ARM selected the
fork family unconditionally, BUILD_KERNEL included, and that has never
worked: on a kernel build the architecture's fork entry point sees the
kernel's return address and stack pointer rather than the caller's, so the
child resumes at a kernel address. On qemu-armv7a:knsh master faults in
ostest's fork case with "Child did not run" and then a data abort; without
the condition this change faults the same way through vfork(). ARCH_ARM64
and ARCH_X86_64 already carried "if !BUILD_KERNEL" for exactly this reason --
ARM was the outlier. Conditioning it turns a runtime fault into an honest
absence, which is the whole point of the change; arch/arm takes the condition
off again in the patch that adds its saved-syscall-frame path. Only the
MMU-capable ARM ports are affected, since Cortex-M cannot build BUILD_KERNEL
at all.
Also fixes two latent syntax errors found on the way: a missing comma in
riscv_fork.c and mips_fork.c, both in *_FRAMEPOINTER && !SAVE_GP branches
that are never compiled today.
BREAKING CHANGE: fork() is withdrawn from every architecture. It is no
longer declared in unistd.h, so code that calls it fails to build with an error
naming the function, and the sharing behaviour it used to have is gone rather
than renamed. CONFIG_ARCH_HAVE_FORK no longer means "fork() exists"; it means
"this configuration can provide POSIX fork() semantics", and no architecture
selects it yet.
Quick fix, chosen by why the call was made:
to run a program vfork() + exec*(), or better posix_spawn()
a second flow of control that pthread_create()
shares the caller's memory
a genuinely independent copy keep fork(), and wait for the per-arch patch
of the process that implements up_addrenv_fork() and selects
CONFIG_ARCH_HAVE_FORK
Out-of-tree code that tests CONFIG_ARCH_HAVE_FORK to decide whether a
fork-then-exec path is available wants CONFIG_ARCH_HAVE_VFORK instead, which is
selected in exactly the places CONFIG_ARCH_HAVE_FORK used to be. The full
migration guide is Documentation/guides/fork_vfork_migration.rst.
Assisted-by: Claude Code:claude-opus-5
Signed-off-by: Marco Casaroli <marco.casaroli@gmail.com>
This change fixes NuttX’s CMake support when NuttX is embedded
in another project via add_subdirectory(). CMake’s CMAKE_SOURCE_DIR
and CMAKE_BINARY_DIR refer to the outermost project, causing NuttX
to access its .config, generated files, host tools, and build artifacts
in the parent project’s directories. The fix introduces NUTTX_DIR and
NUTTX_BINARY_DIR, based on CMAKE_CURRENT_SOURCE_DIR and
CMAKE_CURRENT_BINARY_DIR, and consistently uses them for NuttX
self-references while preserving existing standalone builds. It fixes
the Kconfig initialization failure reported in #19697 and allows an
embedded sim:nsh build to configure, build, and boot successfully.
The change affects only the CMake build system (not Make or Kconfig
defaults), requires the corresponding nuttx-apps change, and does not
extend add_subdirectory() support to cross-compiled non-sim boards due
to CMake’s toolchain-file limitation.
Fixes#19697.
Assisted-by: Claude:claude-sonnet-5
Signed-off-by: Alan Carvalho de Assis <acassis@gmail.com>
The CMake build referenced arm64_physpgaddr.c and arm64_virtpgaddr.c,
which no longer exist (consolidated into arm64_pgalloc.c, already
listed).
Signed-off-by: raiden00pl <raiden00@railab.me>
Assisted-by: Claude Code
arch_interface exists only for CONFIG_BUILD_PROTECTED, but x86_64 and
arm64 referenced it for any non-flat build, breaking CMake
configuration of kernel builds. Use the CONFIG_BUILD_PROTECTED guard
as arm and risc-v do.
Signed-off-by: raiden00pl <raiden00@railab.me>
Assisted-by: Claude Code
USDHC_PROCTL selects whether the usdhc uses SDMA or ADMA. This driver
only uses the SDMA or no DMA at all, so select that option. There might be a
wrong register value left by ROM code or an earlier bootloader which uses
ADMA.
Signed-off-by: Jukka Laitinen <jukka.laitinen@tii.ae>
On K3 SoCs the A53 cluster does not own device power, clocks, resets or
interrupt routing; these are managed by the DM/TIFS firmware and requested
over TISCI through the secure-proxy mailbox. Add:
- a TISCI client (secure-proxy transport plus device/clock/reset helpers)
- a GPIO driver for banks 0/1 with pad mux and TISCI power-on
- an OMAP-I2C driver for the main-domain I2C controllers
and wire them into the PocketBeagle2 and BeaglePlay bring-up.
Tested on PocketBeagle2 (SYSFW 11.2.5) with the TechLab cape attached:
nsh> i2c bus
nsh> i2c dev -b 0 0x03 0x77 # I2C0 detects onboard 0x20 and 0x50
nsh> gpio -o 1 /dev/gpio3 # drives a user LED; read back with:
nsh> gpio /dev/gpio3
Signed-off-by: Piyush Patle <piyushpatle228@gmail.com>
During the Toybox port to NuttX, Claude noticed that changes in the
menuconfig weren't taking affect. This issue exists for a long time on
NuttX, in fact BayLibre's presentation from 2017 make jokes about our
building system not been reliable:
https://www.youtube.com/watch?v=XUJK2htXxKw&t=320s
Stale archive members from $(AR)'s additive-only behavior can linger
after Kconfig toggles change which files provide a symbol, causing dead
weight or "multiple definition" link errors on incremental builds.
Fixed by splitting ARCHIVE into two macros: ARCHIVE keeps the original
additive behavior for apps/libapps.a, which many independent
subdirectories contribute to across a build, while the new
ARCHIVE_REBUILD deletes then archives for the far more common case
of a single Makefile building its own self-contained $(OBJS)
- all 39 such call sites now use it.
Assisted-By: Claude Sonnet 5
Signed-off-by: Alan C. Assis <acassis@gmail.com>
Fix build error where PWM0 pinout selection checks would still be
compiled even when PWM0 was not enabled.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
host_ioctl() reports unsupported ioctl requests from hostfs backends. Use
-ENOTTY for that case instead of -ENOSYS so callers can distinguish an
unsupported ioctl request from a missing host operation.
Keep the other host operation stubs returning -ENOSYS; this change is limited
to ioctl semantics. Update the ARM, ARM64, RISC-V, Xtensa and Windows sim
hostfs stubs to match that behavior.
Testing:
Host: Ubuntu 22.04 x86_64
- git diff --check
- make distclean
- ./tools/configure.sh -l -a ../nuttx-apps sim:nsh
- make -j16
- printf 'help\npoweroff\n' | timeout 20s ./nuttx
- make distclean
- ./tools/configure.sh -a ../nuttx-apps sabre-6quad:knsh
- make -j16
Assisted-by: Claude:Claude-Fable-5
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
host_flags_to_mode() used a trailing 0 entry in modeflags[] as the
loop-termination sentinel. O_RDONLY is defined as 0 and is exactly
modeflags[1], so the loop's termination check fired before ever
comparing that entry, and a bare O_RDONLY open always fell through
to -EINVAL.
Bound the loop by array size (nitems()) instead of a value sentinel.
Signed-off-by: liang.huang <liang.huang@houmo.ai>
I document the issues encountered with multi-block transfers, namely the
block count failing to be set correctly. Even though I did test with
that issue corrected, it required modifications to the upper-half MMCSD
driver which I am not prepared to test. It also did not fix the time-out
on multi-block transfers, likely because the method of verifying FIFOs
have space to write is finicky. For now, limiting the block count of
transfers resolves the bug!
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
Cache must be invalidated before the buffer is read since the
VideoCore's write will not invalidate the cache.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
CCM_CR_COUNT is defined as the last CCM root index in the non-SCMI tables, and CCM_CR_PALCAMESCAN also uses that value. Use a strict greater-than check so root 94 reaches the CCM register helpers.
Generated-by: OpenAI Codex
Signed-off-by: Old-Ding <35417409+Old-Ding@users.noreply.github.com>
Align the NuttX open(2) flag constants with the Linux asm-generic
values so that the FUSE wire protocol and other cross-platform
interfaces work without conversion.
All code that used '(flags & O_RDONLY)' as a bitmask check (always 0
now that O_RDONLY=0) has been updated to use '(flags & O_ACCMODE)'
comparisons.
The NUTTX_O_* constants in include/nuttx/fs/hostfs.h are updated to
match, and the sim hostfs open flag mapping is fixed.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
This commit adds support for I2C transfers spread across multiple
messages using the I2C_M_NOSTOP/I2C_M_NOSTART. The approach greedily
merges as many sequential I2C messages together as possible and
considers them as a single transfer.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
Correct build errors when CONFIG_ENABLE_ALL_SIGNALS is not defined
- sched makefiles: Move pending-signal helpers from the ENABLE_ALL_SIGNALS-only
list to the !DISABLE_ALL_SIGNALS list so signal dispatch is available in
PARTIAL builds sched: make SIG_PREALLOC_ACTIONS, SIG_ALLOC_ACTIONS and
SIG_DEFAULT depend on ENABLE_ALL_SIGNALS
- sched: fix ifdefs around pending-signal queue access and signal-mask for
PARTIAL/DISABLE modes
- arch: gate SYS_signal_handler / _return calls and SYSCALL_LOOKUP(signal)
with ENABLE_ALL_SIGNALS
Signed-off-by: Jukka Laitinen <jukka.laitinen@tii.ae>
__start is the kernel boot entry for each chip, while _start (defined
in crt0.c) is the correct C runtime entry point for ELF executables.
Signed-off-by: leisiji <2265215145@qq.com>
This change causes the frame buffer allocation to use the connected
device's physical resolution by default. The user also has the option to
force a request for a different, compile-time selected resolution if the
physical display can support something else the user would prefer.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
Add the AM62x architecture support needed to boot NuttX on TI K3
AM62x platforms. This includes the chip integration, memory map, IRQ
definitions, low-level console support, boot code, and the AM62x 16550
serial lower half.
Signed-off-by: Piyush Patle <piyushpatle228@gmail.com>
AM62x enters NuttX through EL2 before dropping to EL1. Enable the
GICv3 system register interface for lower exception levels during the
EL2 handoff so EL1 can use the CPU interface without depending on
firmware state.
Signed-off-by: Piyush Patle <piyushpatle228@gmail.com>
Now that time_t is unconditionally 64-bit (signed int64_t) and the
struct timespec fields tv_sec / tv_nsec are wide enough on their own,
the explicit (uint64_t)/(int64_t)/(int) casts that used to guard the
multiplications and subtractions in *_us / *_ms / *_ns helpers are no
longer needed. Drop them to keep the timekeeping math readable and
consistent with the previous sclock_t/time_t cleanup.
In the same spirit, this commit also:
* Normalises the printf-style format specifiers and casts used to
print tv_sec / tv_nsec / tv_usec values across arch/, drivers/,
fs/, sched/ and libs/. The prior code was a mix of
"%d"/"%u"/"%ld"/"%lu"/"%lld"/PRIu32/PRIu64 with matching
(int)/(unsigned long)/(long long)/PRIu* casts; some formats
truncated time_t on 32-bit hosts, others mismatched signedness or
width. Replace all such cases with the portable POSIX-recommended
forms:
- tv_sec (time_t, signed, impl-defined width) -> %jd + (intmax_t)
- tv_nsec (long, signed) -> %ld (no cast)
- tv_usec (suseconds_t / long) -> %ld (no cast)
Add #include <stdint.h> where required.
* Drops a few stale `(FAR const time_t *)&ts.tv_sec` casts and
related `(FAR struct tm *)` / `(const time_t *)` casts in
gmtime_r() / localtime_r() / gmtime() callers; ts.tv_sec is plain
time_t now and the casts only obscured the type.
* Fixes one overflow in fs/procfs/fs_procfscritmon.c where
all_time.tv_sec * 1000000 could overflow on 32-bit time_t before
being multiplied again; cast to uint64_t at the start.
No behavioural change.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
BREAKING CHANGE: remove PWM_MULTICHAN option
PWM_MULTICHAN option is redundant, we can just set CONFIG_PWM_NCHANNELS > 1.
At default CONFIG_PWM_NCHANNELS is set to 1, so the default behavior is preserved.
Access to single channel API is now `info->channels[0].XXX` instead of `info->XXX`
This is the first step to simplify PWM implementation and make it more portable.
Signed-off-by: raiden00pl <raiden00@railab.me>
Add support for the i.MX9 SAR ADC block.
The driver provides initialization, deinitialization, channel-mask
validation, and one-shot reads for the supported ADC channels. It also
handles the ADC clock bring-up, power-up sequence, calibration, and raw
12-bit result extraction from the per-channel data registers.
Signed-off-by: Joonas Ihonen <joonas.ihonen@tii.ae>
The goal is to only execute recipes when there is an actual change in
the prerequisites.
There are several issues which cause the nuttx binary target to be
re-made every time the top level make is run.
1. Previously the target nuttx$(EXEEXT), was used, but make resolved
this in the relative directory make -C $(ARCH_SRC), and couldn’t find
it (need an absolute path: `$(TOPDIR)/..).
2. The .tmp prerequisite for nuttx was always deleted
3. libboard's recipe had a sub-make which may or may not update that
target. This was a phony target, and was therefore always considered out
of date.
These issues were causing the nuttx recipe to be run every make, which
was hiding some missing prerequisites:
1. the .config is a prerequisite for the .tmp target
2. libapps.a (and other linklibs) are pre-requisites for nuttx
Changes:
The changes are only in the build system, and only for arm.
Track nuttx$(EXEEXT) via vpath so Make knows when it's already up to
date without an explicit path. Add $(TOPDIR)/.config as a dependency
to the linker script preprocessing so config changes trigger
re-preprocessing.
Keep the .tmp linker script on disk (clean already removes it) so
timestamp-based dependency checking works across builds. These .tmp
files need to be added to the gitignore or the CI will complain.
Use FORCE pattern for board/libboard to ensure it's always checked
but use the actual library file as the link dependency so nuttx is
only re-linked when library content changes. Add staging libs as
dependency to nuttx link rule so changed app libs trigger re-link.
Signed-off-by: Liam Hickey <williamhickey@geotab.com>
Create a bidirectional dshot lower-half driver, using the flexio block.
This driver enables use of DShot protocol for Electronic Speed Controllers
(ESCs) typically used in drone motor control.
Eight channels of DShot per flexio block are supported in:
- Normal mode in all DShot speeds, with telemetry request (uart response
needs to be handled outside of this driver)
- Bidirectional mode in all DShot speeds, with telemetry request & response
- Configurable to use either independent TX timers for each channel, or to
use a common TX timer for all channels to synchronize the output
- For bidirectional RX, each channel always uses an own timer.
In normal mode, the driver operates without any interrupts.
In bidirectional mode, the driver reconfigures the FlexIO timers (as needed)
and shifters from TX to RX in the interrupt handler, and reads out the
raw response packet.
Signed-off-by: Jukka Laitinen <jukka.laitinen@tii.ae>
debug.h is a NuttX-specific, non-POSIX header. Placing it in the
top-level include/ directory creates naming conflicts with external
projects that define their own debug.h.
This commit moves the canonical header to include/nuttx/debug.h,
following the NuttX convention for non-POSIX/non-standard headers,
and updates all in-tree references.
A backward-compatibility shim is left at include/debug.h that
emits a deprecation #warning and re-includes <nuttx/debug.h>,
allowing out-of-tree code to continue building while migrating.
Signed-off-by: Piyush Patle <piyushpatle228@gmail.com>
include/cxx contains NuttX's mini C++ ABI shims and must only be added
to the include path when CONFIG_LIBMINIABI is selected. tools/Config.mk
was adding it unconditionally for every non-LIBCXX/non-UCLIBCXX build,
and the platform.cmake files for arm, arm64, risc-v, x86_64 and tricore
were adding it inside the CONFIG_LIBCXXTOOLCHAIN block.
With an unpatched downloaded ARM GNU Toolchain, <cstdlib> uses
newlib's stdlib.h, defining div_t as an anonymous struct. A later
inclusion of NuttX's stdlib.h via <cstdio>->stdio.h->kmalloc.h then
redefines div_t with struct tag div_s, causing a conflicting declaration
error.
Guard the div_t/ldiv_t/lldiv_t definitions in stdlib.h with
redefinitions when a toolchain stdlib.h was already processed.
Also fix lldiv_s members typed as long instead of long long.
Signed-off-by: trns1997 <trns1997@gmail.com>
imx9_dmapreflight() rejected unaligned buffers unconditionally, but
dmarecvsetup() has a bounce path via priv->rxbuffer for small
transfers. Add a buflen > sizeof(priv->rxbuffer) check so that
small reads (e.g. ext_csd 512-byte stack buffer) can use the
bounce buffer instead of failing with -EFAULT.
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
Port USDHC1 (eMMC) driver to the i.MX95 FRDM EVK board:
- Create imx95_pinmux.h with SD1/USDHC1 pin definitions
- Add USDHC1 pin macros to board.h
- Create board-level imx9_usdhc.c glue code
- Update imx9_bringup.c with DMA allocator and USDHC init
- Add SCMI clock guards in imx9_usdhc.c (imx95 clock roots
are owned by System Manager, direct CCM writes are no-ops)
- Fix CCM_CR_USDHC2 copy-paste bug to CCM_CR_USDHC1
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
Add imx95 GPIO register definitions (same IP block as imx93), fill
g_gpio_base[] array for imx95, include imx95_gpio.h from the common
header, and compile imx9_gpio.c/imx9_gpiobase.c for imx95 in cmake.
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
Rename IMX9_IRQ_uSDHC{1,2,3} to IMX9_IRQ_USDHC{1,2,3} in both arm
and arm64 imx95_irq.h to follow the all-caps naming convention used
by imx93_irq.h and the rest of the NuttX codebase. Remove the now
unnecessary USDHC IRQ alias block from arm64 imx95_irq.h.
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
arm64_modifyreg8.c, arm64_modifyreg16.c, arm64_modifyreg32.c were
present in Make.defs but missing from CMakeLists.txt, causing link
errors when building with cmake.
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
Fix 269 occurrences of duplicate "the" word typo found in 209 files
across source code, header files, and configuration.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
* Fix GPIO unspecified behavior on some GPIO ports.
* Fix GPIO undefined behavior caused by uncleared set or reset bits.
Signed-off-by: Saurav Pal <resyfer.dev@gmail.com>
Mainline Linux doesn't use data encapsuation or flow control in its
tty_rpmsg driver. Create a NuttX counterpart which matches this
implementation.
This driver uses the static "rpmsg-tty" name to connect with the
remote service.
Signed-off-by: Maarten Zanders <maarten@zanders.be>
