The previous interrupt implementation allowed only one single interrupt
mode to be selected. The debug assertion is now updated to allow the
entire range of possible interrupt combinations (a 4-bit field), up to
0xf.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
This commit introduces initial support for the Seeed Studio XIAO ESP32C6
board. Five configurations are available:
- nsh: Basic NuttShell support over UART0
- usbnsh: Basic NuttShell support over USB
- gpio: NuttShell over USB + GPIO
- wifi: NuttShell over USB + Wifi support
Signed-off-by: Rodrigo Sim <rcsim10@gmail.com>
This commit adds the documentation for the Seeed Studio XIAO ESP32C6
board. It includes examples for NSH, USBNSH, GPIOs and Wifi.
Signed-off-by: Rodrigo Sim rcsim10@gmail.com
The guide:
- explains the different OP-TEE transports available
in NuttX
- gives brief instructions on how to enable the OP-TEE
driver
- documents the IOCTLs supported, and
- shows typical usage in a NuttX app
Signed-off-by: George Poulios <gpoulios@census-labs.com>
So far NuttX has supported OP-TEE interfacing over
local and RPMsg sockets. This commit introduces support
for direct invocation of OP-TEE through arm SMCs. The
SMC transport is enabled through CONFIG_DEV_OPTEE_SMC.
This SMC implementation has been tested only with arm64,
OP-TEE rev 4.4.
Note that it does not support reverse direction RPCs,
i.e. from the Secure World to the Normal World to
something like optee supplicant. A basic RPC handling
skeleton is provided with implementation for some
basic functions (alloc/free mem, and foreign interrupts)
but no supplicant command handling.
(+one minor change s/parm/param in arch/arm64/include/syscall
to satisfy the spellchecker during PR)
Signed-off-by: George Poulios <gpoulios@census-labs.com>
Adds support for SHM_REGISTER IOCTL. Registration can
be requested both against the driver (for automatic cleanup)
and against the secure OS (for sharing).
Introduces also `optee_{msg,free}_alloc()` to allocate
aligned memory for message arguments depending on the
`alignment` specified in the driver's private data. For
alignment greater than word size, memory is allocated on the
heap, otherwise it's allocated on the stack (similar to the
previous implementation but using `alloca()` instead).
Signed-off-by: George Poulios <gpoulios@census-labs.com>
Besides a few checks for NULL IOCTL argument values, this
commits introduces also a check to ensure that user specified
memory (mainly IOCTL arguments) indeed belongs to the user.
This is applicable only with `CONFIG_ARCH_ADDRENV`.
Signed-off-by: George Poulios <gpoulios@census-labs.com>
Prepares the ground for introducing new transports to
the OP-TEE driver. "transports" as in alternatives to
RPMsg and local network.
Signed-off-by: George Poulios <gpoulios@census-labs.com>
When using pthread_kill, the signal should be delivered to the
specified thread. Current implementation, however, may add the
signal to the groups pending list, if the signal is masked at the
time of dispatch. From the group's pending list it can be delivered
to any thread of the group, which is wrong.
Fix this by adding a new field "FAR struct tcb_s *tcb" to
"struct sigpendq", marking if the signal needs to be delivered
to a specific thread. Use NULL for the value if delivery to any
thread in the group is ok.
Signed-off-by: Jukka Laitinen <jukka.laitinen@tii.ae>
The kmm_alloc can break the critical section, if it sleeps on the
heap mutex. If we run out of pending signal structures, allocate more
right after entering the critical section but before checking if the signal
needs to be added to the pending queue.
Signed-off-by: Jukka Laitinen <jukka.laitinen@tii.ae>
The TCB used in find_action is locked by spinlock, so it doesn't belong
inside critical section. Just find the possible action already in the
beginning of nxsig_tcbdispatch.
Signed-off-by: Jukka Laitinen <jukka.laitinen@tii.ae>
- Remove the redundant holder, as nxsem now manages hoder TID
- Remove DEBUGASSERTIONS which are managed in nxsem
- Remove the "reset" handling logic, as it is now managed in nxsem
- Inline the simplest functions
Signed-off-by: Jukka Laitinen <jukka.laitinen@tii.ae>
This enables the mutex fast path for nxsem_wait, nxsem_trywait and nxsem_post also when
the priority inheritance is enabled.
Signed-off-by: Jukka Laitinen <jukka.laitinen@tii.ae>
This puts the mutex support fully inside nxsem, allowing
locking the mutex and setting the holder with single atomic
operation.
This enables fast mutex locking from userspace, avoiding taking
critical_sections, which may be heavy in SMP and cleanup
of nxmutex library in the future.
Signed-off-by: Jukka Laitinen <jukka.laitinen@tii.ae>
The task which is deleted should be removed from the semaphores waitlist,
if the task happens to be blocked.
Signed-off-by: Jukka Laitinen <jukka.laitinen@tii.ae>
The board has got only 64KB of flash, and is on the limit. Removing printf floating point
support frees up ~3kB of flash.
Signed-off-by: Jukka Laitinen <jukka.laitinen@tii.ae>
This patch adds definitions for listed chips. No other changes are needed
as the chips are similar to the previously supported AVR128DA28 and all
that is needed is some definitions for extra peripherals.
AVR DA/DB family chips have single interrupt vector for all changes
on an I/O port. This poses problem when multiple drivers want to claim
the same interrupt (might happen for example with button and discrete
joystick drivers using pins on the same port.)
The I/O multiplexer solves it by providing interface similar
to irq_attach. However, it allows registration of multiple handlers
for the same interrupt vector with additional information recording
which pins should be serviced by each handler.
Only handler for pins that triggered the interrupt is then called.
Initial support adds chip specific files like Kconfig, flags for the compiler,
and basic functionality like system timer. Some files are stubs derived
from corresponding ATmega files but without the functionality they are
supposed to add (to be done in later patches)
Part of the work is altered copies of corresponding files for ATMega MCUs.
Initially supported is AVR128DA28.
This patch marks host GCC toolchain option with ARCH_TOOLCHAIN_GCC,
enabling various other settings depending on it. One of the enabled
settings is DEBUG_OPT_UNUSED_SECTIONS.
This patch also adjusts compiler and linker flags based on the value
of DEBUG_OPT_UNUSED_SECTIONS so unused sections are removed
Newer AVR chips (DA/DB family) use mixed-case constants in header
file defining constants for I/O register values (provided
by manufacturer.)
Based on mailing list discussion, this patch adds some
of the lowercase suffixes used (the less prevalent constants
are then redefined in NuttX.)
The .progmem section in the .text section contains data marked
to not be copied into RAM and instead used directly from program
memory. Unlike other sections that naturally align to 2 byte words,
this section may be odd in length.
If this happens, following sections will end up misaligned
and the compilation will fail. This patch forces correct alignment
after the .progmem section end.
