POSIX leaves the signedness of time_t and clock_t unspecified, but
mainstream implementations (Linux glibc/musl, the BSDs, macOS, RTEMS,
Zephyr's POSIX layer, Windows _time64) expose time_t as signed 64-bit.
NuttX has historically used uint64_t only because it was tied to the
CONFIG_SYSTEM_TIME64 knob; with that gone, switch:
time_t : uint64_t -> int64_t
clock_t : uint64_t -> int64_t
CLOCK_MAX: UINT64_MAX -> INT64_MAX
This lets (time_t)-1 sentinels, negative tick deltas, and host-side
headers behave as on every other POSIX system without source churn.
Headers updated:
- include/sys/types.h, include/limits.h, include/nuttx/clock.h
- include/nuttx/fs/hostfs.h (nuttx_time_t alias)
- include/nuttx/{mqueue.h,wdog.h,wqueue.h,timers/clkcnt.h}
Because clock_t is now signed 64-bit, the NuttX-internal sclock_t
alias becomes redundant: every sclock_t/SCLOCK_MAX use is folded
back to clock_t/CLOCK_MAX (notably in sched/wdog, sched/mqueue,
sched/sched, sched/clock, sched/timer, libs/libc/time, fs/vfs and
the drivers/arch consumers below).
Tick/period constants (NSEC_PER_SEC, USEC_PER_SEC, MSEC_PER_SEC,
SEC_PER_MIN, ...) in include/nuttx/clock.h are retyped from "long"
literals to INT64_C(...) so that 64-bit arithmetic no longer
depends on the host's long width.
Strip now-redundant (time_t)/(clock_t)/(unsigned long) casts and
unsigned-only branches across the tree:
- arch RTC / oneshot / tickless lowerhalfs:
arm: cxd56xx, efm32, imxrt, lc823450, max326xx, sam34, sama5,
samd5e5, samv7, stm32, stm32f7, stm32h7, stm32l4, stm32wb,
xmc4
mips: pic32mz sparc: bm3803 x86_64: intel64
risc-v/xtensa: espressif (esp_i2c[_slave], esp_rtc,
esp32c3{_i2c,_rtc,_wifi_adapter}, esp32{,s2,s3}_*),
mpfs_perf
- drivers: audio/tone, input/aw86225, power/pm/{activity,
stability}_governor, rpmsg/rpmsg_ping,
timers/{ds3231,mcp794xx,pcf85263,rx8010},
wireless/ieee80211/bcm43xxx, wireless/spirit/spirit_spi
- core: fs/vfs/{fs_poll,fs_timerfd}, mm/iob/iob_alloc,
libs/libc/{netdb/lib_dnscache,time/{lib_calendar2utc,
lib_time}}, net/icmp/icmp_pmtu, net/icmpv6/icmpv6_pmtu,
net/ipfrag, net/tcp/{tcp.h,tcp_timer},
net/utils/net_snoop, net/mld/mld_query (drop the now-dead
mld_mrc2mrd helper since signed math handles it directly),
sched/clock/{clock,clock_initialize},
sched/sched/{sched_profil,sched_setparam,sched_setscheduler},
sched/pthread/pthread_create,
sched/wdog/{wd_gettime,wd_start,wdog.h},
sched/timer/timer_gettime, sched/mqueue/*
Flip the few in-tree printf format strings that assumed an
unsigned 64-bit tv_sec:
* drivers/rpmsg/rpmsg_ping.c PRIu64 -> PRId64
* arch/xtensa/src/esp32{,s2,s3}/esp32*_oneshot_lowerhalf.c
PRIu32 (already wrong) -> PRId64
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
debug.h is a NuttX-specific, non-POSIX header. Placing it in the
top-level include/ directory creates naming conflicts with external
projects that define their own debug.h.
This commit moves the canonical header to include/nuttx/debug.h,
following the NuttX convention for non-POSIX/non-standard headers,
and updates all in-tree references.
A backward-compatibility shim is left at include/debug.h that
emits a deprecation #warning and re-includes <nuttx/debug.h>,
allowing out-of-tree code to continue building while migrating.
Signed-off-by: Piyush Patle <piyushpatle228@gmail.com>
modify the code of the adapted protocol stack to avoid deadlocks and the
logic that cannot be protected by locks after modification.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Nuttx currently has 2 types of sleep interfaces:
1. Signal-scheduled sleep: nxsig_sleep() / nxsig_usleep() / nxsig_nanosleep()
Weaknesses:
a. Signal-dependent: The signal-scheduled sleep method is bound to the signal framework, while some driver sleep operations do not depend on signals.
b. Timespec conversion: Signal-scheduled sleep involves timespec conversion, which has a significant impact on performance.
2. Busy sleep: up_mdelay() / up_udelay()
Weaknesses:
a. Does not actively trigger scheduling, occupy the CPU loading.
3. New interfaces: Scheduled sleep: nxsched_sleep() / nxsched_usleep() / nxsched_msleep() / nxsched_ticksleep()
Strengths:
a. Does not depend on the signal framework.
b. Tick-based, without additional computational overhead.
Currently, the Nuttx driver framework extensively uses nxsig_* interfaces. However, the driver does not need to rely on signals or timespec conversion.
Therefore, a new set of APIs is added to reduce dependencies on other modules.
(This PR also aims to make signals optional, further reducing the code size of Nuttx.)
Signed-off-by: chao an <anchao.archer@bytedance.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
The `xxx_ipv6multicast` function in each driver is not adapted to
multiple IPv6 addresses yet, and they're redundant, so try to take them
into common code.
Change:
1. Add MAC `g_ipv6_ethallnodes` and `g_ipv6_ethallrouters` in
`icmpv6_devinit` and call them in `netdev_register`
2. Add multicast MAC for Neighbor Solicitation when adding any IPv6
address, and remove them when IPv6 address is removed
3. Select `NET_MCASTGROUP` when `NET_ICMPv6` because now we need
`d_addmac` when we have ICMPv6
Note:
We want modules outside net stack to call functions like
`netdev_ipv6_add` and never touch the related MAC address, so these MAC
functions are added as internal functions to `net/netdev/netdev.h`
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
I added a function that I didn't use when I upstream another patch. Delete it
https://github.com/apache/nuttx/pull/10709
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
These structures need to be aligned with the firmware, packed_struct will cause the scan information from Wi-Fi firmware not to be parsed by broadcom Wi-Fi driver. Therefore, we need to remove the packed_struct of the structure associated with the scan information.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Remove TABs
Fix indentation
Fix Multi-line comments
Fix Comments to the Right of Statements.
Fix nuttx coding style
Fix Comments to the Right of Statements.
1. Update all CMakeLists.txt to adapt to new layout
2. Fix cmake build break
3. Update all new file license
4. Fully compatible with current compilation environment(use configure.sh or cmake as you choose)
------------------
How to test
From within nuttx/. Configure:
cmake -B build -DBOARD_CONFIG=sim/nsh -GNinja
cmake -B build -DBOARD_CONFIG=sim:nsh -GNinja
cmake -B build -DBOARD_CONFIG=sabre-6quad/smp -GNinja
cmake -B build -DBOARD_CONFIG=lm3s6965-ek/qemu-flat -GNinja
(or full path in custom board) :
cmake -B build -DBOARD_CONFIG=$PWD/boards/sim/sim/sim/configs/nsh -GNinja
This uses ninja generator (install with sudo apt install ninja-build). To build:
$ cmake --build build
menuconfig:
$ cmake --build build -t menuconfig
--------------------------
2. cmake/build: reformat the cmake style by cmake-format
https://github.com/cheshirekow/cmake_format
$ pip install cmakelang
$ for i in `find -name CMakeLists.txt`;do cmake-format $i -o $i;done
$ for i in `find -name *\.cmake`;do cmake-format $i -o $i;done
Co-authored-by: Matias N <matias@protobits.dev>
Signed-off-by: chao an <anchao@xiaomi.com>
In the past, header file paths were generated by the incdir command
Now they are generated by concatenating environment variables
In this way, when executing makefile, no shell command will be executed,
it will improve the speed of executing makfile
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
1.Don't check the return value of nxsem_init or nxmutex_init
2.Fix some style issue
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
