The link support is no longer limited to the pseudo file system and now
covers both soft (symbolic) links and hard links across the VFS. Rename
the configuration option PSEUDOFS_SOFTLINKS to the more accurate FS_LINKS
and update all references in the source, headers, Kconfig, documentation
and board defconfigs accordingly.
This is a configuration rename; any out-of-tree defconfig that still
selects PSEUDOFS_SOFTLINKS must be updated to FS_LINKS.
Signed-off-by: zhengyu16 <zhengyu16@xiaomi.com>
Switch all esp32s3-devkit defconfigs still on nsh_main (adc, audio,
ble, blewifi, buttons, capture, crypto, cxx, efuse, elf, eth_lan9250,
fastboot, fastboot_tcp, gpio, i2c, i2schar, knsh, ksta_softap, mbedtls,
mcuboot_nsh, mcuboot_update_agent, motor, nsh, nxlooper, oneshot,
ostest, pm, psram_octal, psram_quad, psram_usrheap, pwm, python,
qemu_debug, qemu_openeth, qemu_toywasm, qencoder, random, rmt, romfs,
rtc, sdm, sdmmc, sdmmc_spi, smp, sotest, spi, spiflash, spislv,
sta_softap, stack, temperature_sensor, tickless, timer, toywasm, twai,
ulp, usb_device, usbnsh, watchdog, wifi) to nxinit (init_main) as the
system init entry point, matching this board's adb/txtable configs
that already use nxinit, and matching the lckfb-szpi-esp32s3 board
(see 73c949c87e) for consistency across esp32s3 boards.
For each defconfig:
- CONFIG_INIT_ENTRYPOINT switched to "init_main"
- CONFIG_INIT_STACKSIZE set to 8192. Measured on lckfb-szpi-esp32s3
with CONFIG_STACK_COLORATION=y on the worst case available: a config
whose init.rc starts two services (console sh + adbd). At the 2048
Kconfig default the board panics at runtime (xtensa_user_panic, task
"sh"); at 4096 init_main reaches FILLED=99.5%, i.e. no headroom; at
8192 it settles at USED=4336 (53.6%). A single-service config only
fills 46.9% of a 3072-byte init stack, so 8192 is deliberately
uniform rather than minimal: it covers the two-service worst case
with roughly 2x margin and keeps every defconfig off the 2048
default, where the init stack overflows and clobbers the global
inode/mount tree - the procfs mount disappears, "ls /" crashes in
read_pseudodir and "ps" reports "/proc not mounted".
- CONFIG_SYSTEM_NXINIT=y added, plus its direct Kconfig dependencies
(CONFIG_EXPERIMENTAL, CONFIG_LIBC_EXECFUNCS, CONFIG_SCHED_CHILD_STATUS,
which depends on CONFIG_SCHED_HAVE_PARENT)
- CONFIG_SYSTEM_NSH_STACKSIZE=8192 added: nsh now runs as a service
spawned by init.rc instead of being init itself, so the shell
workload is carried by its own stack rather than the init stack.
Without this it falls back to CONFIG_DEFAULT_TASK_STACKSIZE (2048
unless the defconfig overrides it) and crashes in getumask while
running "ps", too small to reach the procfs read path.
esp32s3-devkit:stack was the only defconfig that already set this
option (at 4096); it is raised to 8192 with the rest.
- ETC_ROMFS/FS_ROMFS added where missing, needed to ship init.rc via
the board's ROMFS
nsh continues to run as a console service started by init.rc
(boards/xtensa/esp32s3/common/src/etc/init.d/init.rc), not as the
top-level init, matching this board's existing adb/txtable configs.
Verified 59 of the 60 changed defconfigs build cleanly with make.
esp32s3-devkit:qemu_openeth fails to link on this host both before
and after this change (MERGEBIN error: missing ESPTOOL_BINDIR, a
pre-existing local build-invocation issue unrelated to this patch).
esp32s3-devkit:stack segfaults the linker on this host both before
and after this change (pre-existing toolchain issue on this host,
unrelated to this patch). esp32s3-devkit:ulp fails at context/rule
generation on this host due to a missing local RISC-V ULP toolchain
setup, also unrelated to this patch.
Runtime behavior (init_main spawning nsh as a console service) was
confirmed on lckfb-szpi-esp32s3 hardware, which shares the same
nxinit/init.rc mechanism; this board has no hardware attached for a
flash/boot pass in this session, so the build-verified defconfigs are
the extent of local testing here.
Assisted-by: Kiro:claude-sonnet-5
Assisted-by: Kiro:claude-opus-5
Signed-off-by: wangjianyu3 <wangjianyu3@xiaomi.com>
The 32-bit system clock has a limited range (~497 days) and the
configuration knob is no longer worth the complexity given that
practically every modern target already enables it. Make 64-bit
time_t/clock_t/sclock_t/nuttx_time_t the only supported flavor.
Specifically:
- Drop the SYSTEM_TIME64 Kconfig option and its dependent
PERF_OVERFLOW_CORRECTION/HRTIMER guards in sched/Kconfig.
- Remove every #ifdef CONFIG_SYSTEM_TIME64 branch in headers
(include/{sys/types.h,limits.h,inttypes.h,nuttx/clock.h,
nuttx/fs/hostfs.h}) and core code paths
(sched/clock/clock.h, drivers/power/pm/pm_procfs.c,
drivers/rpmsg/rpmsg_ping.c, fs/procfs/fs_procfsuptime.c,
libs/libc/wqueue/work_usrthread.c,
arch/avr/src/avrdx/avrdx_timerisr_tickless_alarm.c).
- Strip CONFIG_SYSTEM_TIME64=y from every board defconfig.
- Update Documentation/guides/rust.rst accordingly.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
BREAKING: In an effort to simplify NuttX initialization, NSH_ARCHINIT is
removed. board_app_initialize is also removed. BOARD_LATE_INITIALIZE now
performs all board initialization logic, and is by default enabled. All
references to these symbols are removed. BOARDIOC_INIT remains, but will
result in -ENOTTY when called. It is to be removed in a later commit.
Quick fix: Boards relying on NSH_ARCHINIT should now enable
CONFIG_BOARD_LATE_INITIALIZE instead. If the application needs
fine-grained control over board initialization from userspace, the logic
performed by BOARDIOC_INIT may be copied to the board_finalinitialize
function and used instead via BOARDIOC_FINALINIT. All
board_app_initialize logic provided by NuttX is now moved to
board_late_initialize, and the same should be done for out-of-tree
boards.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
Add documentation for the RC/LIRC character driver subsystem covering
device registration, the LIRC interface, and usage from user space.
Remove placeholder empty files under drivers/rmt that were left over
from the rmtchar era and are no longer referenced.
Signed-off-by: Piyush Patle <piyushpatle228@gmail.com>
This commit updates the common-source integration for Xtensa-based
Espressif devices (ESP32, ESP32-S2, and ESP32-S3). This is part of a larger
common-source update split by architecture for better maintainability.
Major components updated:
- IRQ allocator refactoring with intr_alloc integration
- Common-source drivers (GPIO, RMT, I2C, SPI, UART, etc.)
- Espressif components upgrade to release/master.b-test
- Peripheral drivers (ADC, PWM, LEDC, MCPWM, PCNT, Temperature Sensor, etc.)
- Wireless adapters (Wi-Fi and BLE)
- esp_timer migration to the common-source path for Xtensa devices
- Common-source power management implementation (auto-sleep and wakeup paths)
- Board defconfigs for all Xtensa Espressif boards
- SMP support improvements for ESP32-S3
- Critical section handling improvements
Key architectural changes:
- IRQ Allocator: The new interrupt allocator enables multiple mapping
options from interrupt sources to CPU interrupts, providing flexibility
required by modern peripherals. Although this introduces breaking changes
to the interrupt handling API, the required ARCH_MINIMAL_VECTORTABLE
Kconfig option is explicitly checked during startup to ensure proper
configuration. This validation prevents runtime issues from configuration
mismatches.
- Xtensa-specific interrupt handling via esp_xtensa_intr.c providing
NuttX-native implementations of xt_ints_on/off and interrupt handlers,
avoiding conflicts with NuttX's core Xtensa macros.
- Timer/RTC unification: ESP32/ESP32-S2/ESP32-S3 move from chip-specific
RTC/RT-timer code to common-source Espressif integration, including
esp_timer_adapter/esp_rtc paths and the required bringup/defconfig updates.
- Power management consolidation: Xtensa PM follows the common-source
implementation, including common-source auto-sleep behavior, UART/Wi-Fi
wakeup coordination, and tickless-safe sleep flow compatibility.
Note: This is a large commit to maintain bisectability. Breaking the
changes into smaller commits would result in non-building intermediate
states across the common-source infrastructure update.
Tested configurations:
- All defconfigs were tested, including `ostest`.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
Aligns `CONFIG_INTERPRETER_*` options to `CONFIG_INTERPRETERS_*` to be
consistent with other interpreters.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
Upperhalf supports multiple working modes at the same time,
which is specified by NIC when register
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Renaming "modlib" to "libelf" is more in line with the implementation content,
which makes it easier for individual developers to understand the capabilities of this module.
CONFIG_LIBC_MODLIB -> CONFIG_LIBC_ELF
Signed-off-by: chao an <anchao.archer@bytedance.com>
The defconfigs that select the ESP32-S3's WROOM-2-N32R8V module
contains an octal SPI flash chip and a octal SPIRAM module.
This commit updates the defconfig to avoid errors while booting the
device.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
This commit moves some internal libraries' .bss sections to the
external PSRAM chip, freeing internal memory for other usages. Note
that it is necessary to update `esp32s3-devkit:python` defconfig
otherwise it would fail to build.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
