It is not recommend to just copy defconfig to .config instead of
running ./tools/configure.sh. The configure script will do more
than just copying the defconfig, it will create backup config,
it will check if apps/ dir exists, etc.
Signed-off-by: Alan C. Assis <acassis@gmail.com>
This updated the command used for running the openocd-esp32 for
all the supported Espressif's SoCs. It enables using SW-defined
breakpoints.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
Renaming "modlib" to "libelf" is more in line with the implementation content,
which makes it easier for individual developers to understand the capabilities of this module.
CONFIG_LIBC_MODLIB -> CONFIG_LIBC_ELF
Signed-off-by: chao an <anchao.archer@bytedance.com>
This commit adds support for the BMP180 sensor on the
STM32F401RC-RS485 board and updates the board documentation
accordingly. It also enables the BMP180 UORB driver in the
STM32 common logic.
Signed-off-by: Rodrigo Sim <rcsim10@gmail.com>
This patch adds support for the NAU7802 24 bit ADC from Nuvoton.
Please read the documentation for more details.
Signed-off-by: Daniel Byshkin <online@bskdany.com>
Use configuration CDCACM_DISABLE_TXBUF or CDCACM_DISABLE_RXBUF to choose
whether to use usb req buffer as the serial buffer. Since the default
value is n (not using req buf), the original configuration of buf is valid.
This reverts commit 21c8ed80bd.
This commit adds the documentation for the Texas Instruments ADS1115 Driver.
Signed-off-by: Tony Lin <99093620+justapotato213@users.noreply.github.com>
Move debug related pages from Guides to a separate top level page.
This way all pages related to debugging will be in one place
which is more user friendly.
Related Github issue: https://github.com/apache/nuttx/issues/15667
Signed-off-by: raiden00pl <raiden00@railab.me>
Adds initial documentation to the IOCTL commands of wireless character devices.
Signed-off-by: Kevin Witteveen (MartiniMarter) <kevinwit1999@gmail.com>
This PR adds support for the PINE64 Yuzuki Avaota-A1 SBC,
based on Allwinner A527 Arm64 SoC.
Most of the code was derived from NuttX for
QEMU Arm64 Kernel Build qemu-armv8a:knsh.
The modified code is explained here:
https://lupyuen.github.io/articles/avaota#appendix-port-nuttx-to-avaota-a1
platforms/arm64/a527/index.rst:
Added Avaota-A1 to Allwinner A527 SoC
platforms/arm64/a527/boards/avaota-a1/avaota-a1.jpg:
Photo of Avaota-A1, taken by me
platforms/arm64/a527/boards/avaota-a1/index.rst:
Building and booting NuttX for Avaota-A1
Signed-off-by: Lup Yuen Lee <luppy@appkaki.com>
Change the ESP32S3-WROOM-2-N16R8V to ESP32S3-WROOM-1-N8R2.
Reason: not testing on 16MB but successfully tested smaller flash and PSRAM.
Also updated documentation on this defconfig.
Signed-off-by: Filipe Cavalcanti <filipe.cavalcanti@espressif.com>
Modify addressing to allow only 2 byte node address.
Allow modifying the node address by modifying the ipv6 address
(the ipv6 address has a direct relation with the node address)
Introduce the option to add a 4 byte random number to the mac header
as a preparation for ciphered data exchange.
Introduce a FCB (frame control byte) as a replacement for the INFO
field in the mac header.
Update esp32-devkitc:espnow config to reflect address size change.
Update the documentation to reflect address size changes.
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
This PR adds support for the Allwinner A527 Arm64 SoC.
This will be used by the upcoming port of NuttX for
PINE64 Yuzuki Avaota-A1 SBC.
Most of the code was derived from NuttX for
QEMU Arm64 Kernel Build qemu-armv8a:knsh.
The modified code is explained here:
https://lupyuen.github.io/articles/avaota#appendix-port-nuttx-to-avaota-a1
platforms/arm64/a527/index.rst: Added A527 SoC
Signed-off-by: Lup Yuen Lee <luppy@appkaki.com>
This PR adds a photo of PINE64 StarPro64 SBC to the StarPro64 page.
I shot the photo myself with a Sony NEX-7 camera.
Signed-off-by: Lup Yuen Lee <luppy@appkaki.com>
This PR adds support for the PINE64 StarPro64 64-bit RISC-V SBC,
based on ESWIN EIC7700X SoC. Most of the code was derived from NuttX
for Milk-V Duo S (SOPHGO SG2000). The modified code is explained here:
https://lupyuen.github.io/articles/starpro64#appendix-port-nuttx-to-starpro64
`platforms/risc-v/eic7700x/index.rst`:
Added StarPro64 to EIC7700X SoC
`platforms/risc-v/eic7700x/boards/starpro64/index.rst`:
Building and booting NuttX for StarPro64
Signed-off-by: Lup Yuen Lee <luppy@appkaki.com>
This PR adds support for the ESWIN EIC7700X RISC-V SoC.
This will be used by the upcoming port of NuttX for PINE64 StarPro64 SBC.
Most of the code was derived from NuttX for SOPHGO SG2000 SoC.
The modified code is explained here:
https://lupyuen.github.io/articles/starpro64#appendix-port-nuttx-to-starpro64
platforms/risc-v/eic7700x/index.rst: Added EIC7700X SoC
Signed-off-by: Lup Yuen Lee <luppy@appkaki.com>
