The SAADC internal sample timer only works with a single enabled
channel, so hardware-timed multi-channel scan was not possible. Add
NRF52_SAADC_TIMER_PPI, a third trigger mode in which a general-purpose
TIMER compare event is routed to TASKS_SAMPLE over PPI. All enabled
channels are scanned, and the TIMER prescaler allows much lower sample
rates than the internal timer, which is limited to 16MHz/CC with CC in
80..2047.
NRF52_SAADC_CONTINUOUS is no longer tied to the internal timer and
works with either source. Its EasyDMA buffers now hold
NRF52_SAADC_CONTINUOUS_BUFLEN whole scans rather than that many single
samples, so MAXCNT becomes chan_len * BUFLEN. Samples are interleaved
scan by scan, so a channel map is built once at configure() time and
passed to the upper half with the batch; the upper half already accepts
a per-sample channel array. A single-channel configuration produces
the same MAXCNT and the same delivery as before.
Because both features want a PPI channel, add a build-time check that
NRF52_SAADC_PPI_CHANNEL and NRF52_SAADC_CONTINUOUS_PPI_CH differ, and
constrain the latter under the SoftDevice controller like the former.
NRF52_SAADC_CHANNELS gains a default and range for the new mode, and
documents that the internal timer is restricted to one channel.
Assisted-by: Claude Code
Signed-off-by: raiden00pl <raiden00@railab.me>
The i.MX9x platform page carried only a board toctree, so there was nowhere
describing what the chip supports.
Add a peripheral table and a section on the random number generator: the
Kconfig chain, which of DEV_RANDOM and DEV_URANDOM come on by themselves,
and the health checks a block must pass before a read returns it.
Signed-off-by: Royyan Zahir <royzah@gmail.com>
Describe kernel_oct and kernel_n8r2 next to the other configurations of this
board.
The entry for kernel_oct carries what a user needs and cannot guess: a KERNEL
build is the only mode with fork() on this chip, the page pool is reached
through a scratch mapping rather than a permanent window, the ROMFS is linked
into the kernel image so a change to an application needs the whole
export-import-mkromfsimg-relink chain, how to confirm that the ROMFS is really
in the image, and that the shell needs the full path of a program.
The entry for kernel_n8r2 states its limit. Each region of a process is 2
pages, ostest has 115 KiB of text against a 128 KiB text region, and a larger
program needs a module with more PSRAM.
Assisted-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Signed-off-by: Marco Casaroli <marco.casaroli@gmail.com>
Add a Features bullet and a "uart" configuration section to the
RTL8730E EVB board page describing UART0-2 as /dev/ttyS1-3 at
115200 8N1, the serialrx / serialblaster loopback examples and the
runtime TERMIOS support, following the pke8721daf board format.
Signed-off-by: dechao_gong <dechao_gong@realsil.com.cn>
Assisted-by: Claude <noreply@anthropic.com>
Add the ET-Minion core diagram from the Erbium documentation
(aifoundry-org/erbium, Apache-2.0) and a short description of the
ET-Minion neighborhood, as suggested in review. Link the Erbium core,
interrupt, memory map and UART documentation and ET-platform, and note
that silicon uses a 10 MHz mtime while the emulator default is 2 MHz.
Signed-off-by: Afonso Oliveira <afonso.oliveira707@gmail.com>
Describe the Erbium architecture and the Minion board: supported scope,
memory map and interrupts, toolchain constraints, Make and CMake
configurations, how to build the pinned public emulator, and how to run
the NSH and ostest images in it.
Signed-off-by: Afonso Oliveira <afonso.oliveira707@gmail.com>
A MIMXRT1176 flight controller built to the Pixhawk FMUv6X-RT standard, so
the port also covers the NXP MR-VMU-RT1176.
Board data comes from PX4, which already carries it as a NuttX board config:
the clock tree, the LPUART1 pinmux, and the Macronix octal flash
configuration block the boot ROM reads at offset 0x400.
The board ships with the PX4 bootloader in the first 128 KB of QSPI, so the
image links at 0x30020000 and is loaded by it rather than written to the
flash base. The console is CDC/ACM as on teensy-4.x, so a USB cable is the
only thing needed to run NuttX here.
Signed-off-by: Royyan Zahir <royzah@gmail.com>
- Switch board image directive from .. image:: to .. figure:: with
:scale: 50 % and a caption line, matching the format used by other
Ameba board docs (rtl8721dx, rtl8721f).
- Move rtl8730e_evb.png from img/ subdirectory to the same level as
index.rst, consistent with other boards.
- Add gpio configuration section describing the three registered pins
(PB19 output /dev/gpio0, PB20 input /dev/gpio1, PB11 interrupt
/dev/gpio2), usage examples and pin encoding notes.
- Add GPIO to the "Supported in this NuttX port" feature list.
Signed-off-by: dechao_gong <dechao_gong@realsil.com.cn>
Assisted-by: Claude <noreply@anthropic.com>
Record the vhost-net link in the board's Peripheral Support list and
describe the netnsh configuration alongside nsh, including how to bring
the interface up on both sides.
Assisted-by: Claude Code:claude-opus-5
Signed-off-by: Ulaş Sertan Kemeç <sertan.usk@gmail.com>
Adopt the zbus message bus on the linum-stm32h753bi (first adopter
board):
- scripts/flash.ld: include the iterable sections common fragments
(2 lines: common-rom.ld inside .text, common-ram.ld inside .data).
- configs/zbus/defconfig: board configuration enabling zbus with all
observer types, the zbus example and its cmocka test suite
(./tools/configure.sh linum-stm32h753bi:zbus).
- Board documentation: describe the new configuration.
Validated on hardware: the 16-test cmocka suite passes twice in the
same boot and the zbus example produces the expected output.
Assisted-by: Claude Code
Signed-off-by: Jorge Guzman <jorge.gzm@gmail.com>
Record the rptun/rpmsg link to the Linux A53 in the board's Peripheral
Support list.
Assisted-by: Claude Code:claude-opus-5
Signed-off-by: Ulaş Sertan Kemeç <sertan.usk@gmail.com>
The STM32H7 page did not say anything about the Ethernet MAC.
- Describe the time counter of the MAC, the STM32_ETH_PTP option and its
behavior when the interface goes down.
- Describe the pulse-per-second output and the pins it can use.
- Describe the /dev/ptp0 clock the driver registers and the operations it
offers, and show a configuration that enables all of it.
Signed-off-by: Daniel P. Carvalho <danieloak@gmail.com>
Assisted-by: Claude:claude-sonnet-5
The STM32F4 page did not say anything about the Ethernet MAC.
- Describe the time counter of the MAC and the options that enable the
timestamping of received packets, the pulse-per-second output and
the use of the counter as a high-resolution RTC.
- Describe the /dev/ptp0 clock that the driver registers: the
operations it offers, the numbering, and that the timestamps of the
received packets are values of the MAC counter and not of
CLOCK_REALTIME, so they have to be compared with /dev/ptp0.
- Show how to start ptpd with them and a configuration that enables
everything above.
- Say that the driver does not timestamp transmitted packets.
Signed-off-by: Daniel P. Carvalho <danieloak@gmail.com>
Assisted-by: Claude:claude-sonnet-5
Add the documentation for the new supported board configurations and for the architecture,
Assisted-by: Claude Code:claude-opus-4-7
Signed-off-by: Jukka Laitinen <jukka.laitinen@tii.ae>
Record the eCAP1 and eCAP2 APWM outputs in the board's Peripheral
Support list.
Assisted-by: Claude Code:claude-opus-5
Signed-off-by: Ulaş Sertan Kemeç <sertan.usk@gmail.com>
Record the EPWM0 and EPWM1 outputs in the board's Peripheral Support
list.
Assisted-by: Claude Code:claude-opus-5
Signed-off-by: Ulaş Sertan Kemeç <sertan.usk@gmail.com>
Document the purpose of the rv-virt elf and libcxx64 configurations and clarify that the LEDs used by leds64 are virtual/log-only and are not backed by a NuttX GPIO controller.
This addresses issue #20174.
Record the WKUP_I2C0 master in the board's Peripheral Support list.
Assisted-by: Claude Code:claude-opus-5
Signed-off-by: Ulaş Sertan Kemeç <sertan.usk@gmail.com>
Add a Peripheral Support section to the board page listing the GPIO and
MCU_MCSPI0 drivers, and replace the "UART console only" warning on both
the chip and board pages -- it no longer describes the port. The
replacement states what actually constrains the port: NuttX runs on the
R5F under RemoteProc and depends on the bootloader or Linux Device
Manager having powered and clocked the peripherals, because there is no
TISCI client yet.
Assisted-by: Claude Code:claude-opus-5
Signed-off-by: Ulaş Sertan Kemeç <sertan.usk@gmail.com>
Allow sim HCI socket users to select the host-side HCI target at runtime
with --bt-dev. Passing --bt-dev=hciN overrides CONFIG_SIM_HCISOCKET_DEVID
for the BlueZ HCI user channel, while omitting the option keeps the existing
configured default behavior.
Also allow --bt-dev=/path/to/socket to connect to an H:4 stream exposed
through a Unix-domain socket. This lets sim applications use a controller
provided by another host process or by a UART-to-Unix-socket bridge without
requiring BlueZ raw HCI privileges for the NuttX process.
Use host-side output for early --bt-dev parse errors, since NuttX stdio is
not initialized before nx_start().
Document the BlueZ and Unix socket modes, including the capability
requirements for BlueZ and the socat bridge example for Unix socket mode.
Testing:
Host: Ubuntu 22.04 x86_64
Board/config: sim:bthcisock
Style checks:
git diff --check HEAD~2..HEAD
PATH=/home/mi/bsim-auto-test/.venv/bin:$PATH \
./tools/checkpatch.sh -c -u -m -g HEAD~2..HEAD
Clean build:
make distclean
./tools/configure.sh -l -a ../../nuttx-apps sim:bthcisock
kconfig-tweak --file .config --set-val STACK_USAGE_WARNING 0
make olddefconfig
make -j16
Invalid runtime argument smoke test:
./nuttx --bt-dev=invalid
Verified the command exits with status 1 and reports the invalid target
without crashing before nx_start().
Unix socket HCI smoke test:
socat -d -d UNIX-LISTEN:/tmp/hci.sock,fork,reuseaddr \
/dev/ttyACM2,b1000000,raw,echo=0,crtscts=1
printf 'ifconfig\nbt bnep0 info\npoweroff\n' | \
timeout 20s ./nuttx --bt-dev=/tmp/hci.sock
Verified the sim registers the Bluetooth network device as bnep0 and
bt bnep0 info reads the controller state through the Unix-socket HCI
path, including BDAddr aa:bb:cc:dd:ee:ff from the attached controller.
Assisted-by: OpenAI Codex
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Add support for using a BabbleSim PHY as the monotonic time source for
the Linux sim target. When CONFIG_SIM_BSIM_TIME is enabled, the sim
host build links a small host-side time helper against the BabbleSim
PhyCom and Util libraries. The helper joins the BabbleSim PHY wait
protocol and advances NuttX monotonic time through PB_MSG_WAIT requests
instead of Linux wall-time sleeps.
A SIM binary built with CONFIG_SIM_BSIM_TIME enabled joins BabbleSim time
at startup. Runtime options allow the test runner to select the
BabbleSim simulation id, PHY id, and device number:
--sim-bsim-sid=<simulation-id>
--sim-bsim-pid=<phy-id>
--sim-bsim-dev=<device-number>
Keep the integration inside the sim host time path rather than exposing
a new application API. RTC/realtime reads still use the host realtime
clock; the BabbleSim source is used only for monotonic time after the sim
has joined the PHY. The Kconfig option depends on the sleep based
walltime mode and is disabled for SMP and non-Linux hosts.
The build requires BSIM_COMPONENTS_PATH for headers and either
BSIM_OUT_PATH or BSIM_LIBS_DIR for shared libraries. The path checks are
skipped for clean, distclean, clean_context, and context targets so a
tree with CONFIG_SIM_BSIM_TIME enabled can still be cleaned without
exporting the BabbleSim environment first.
Document the configuration, build environment, runtime options, and the
requirement that the BabbleSim PHY process is started separately by the
test runner.
Testing:
Host: Ubuntu 22.04 x86_64
Board/config: sim:nsh
Style check:
git diff --check
Default sim build and smoke test:
./tools/configure.sh -l -a ../nuttx-apps sim:nsh
make -j16
printf 'help\npoweroff\n' | timeout 20s ./nuttx
BabbleSim-enabled build:
kconfig-tweak --file .config \
-e SIM_WALLTIME_SLEEP \
-d SIM_WALLTIME_SIGNAL \
-e SIM_BSIM_TIME
make olddefconfig
BSIM_OUT_PATH=/tmp/bsworld/build/babblesim/bsim \
BSIM_COMPONENTS_PATH=/tmp/bsworld/build/babblesim/bsim/components \
make -j16
Verified actual BabbleSim PHY time integration without a controller by
starting bs_2G4_phy_v1 and running NSH usleep through the PHY wait
barrier:
bs_2G4_phy_v1 -s=<sid> -D=1 -defmodem=BLE_simple -nodump
printf 'usleep 1000000\npoweroff\n' | \
./nuttx --sim-bsim-sid=<sid> \
--sim-bsim-pid=2G4 \
--sim-bsim-dev=0
The same 1 second simulated sleep completed in 19 ms wall time when no
handbrake device was present. With handbrake registered as device 1:
bs_2G4_phy_v1 -s=<sid> -D=2 -defmodem=BLE_simple -nodump
bs_device_handbrake -s=<sid> -p=2G4 -d=1 -pp=50000 -r=1
the same NuttX usleep test completed in 985 ms wall time. A shorter
200 ms check showed the same behavior: 27 ms without handbrake and
172 ms with handbrake. This verifies that NuttX sim time advances
through the BabbleSim PHY and that the handbrake affects the NuttX sim
device.
Also verified make distclean succeeds after CONFIG_SIM_BSIM_TIME was
enabled and without exporting BSIM_COMPONENTS_PATH.
BSWorld out-of-tree native BLE examples:
./tools/configure.sh -l /path/to/bsim-auto-test/tests/nuttx/native_ble/source/advertiser/config
make -j16
exodus --tarball -o /path/to/bsim-auto-test/tests/nuttx/native_ble/source/advertiser/prebuilt/nuttx.tgz nuttx
./tools/configure.sh -l /path/to/bsim-auto-test/tests/nuttx/native_ble/source/scanner/config
make -j16
exodus --tarball -o /path/to/bsim-auto-test/tests/nuttx/native_ble/source/scanner/prebuilt/nuttx.tgz nuttx
pytest tests/nuttx/native_ble -q --no-ellisys
Assisted-by: OpenAI Codex
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
bitbucket.org/nuttx/buildroot returns 404, as does every other repository
under that Bitbucket organisation. The buildroot that still carries the
NuttX toolchain, ldnxflat included, is github.com/patacongo/buildroot.
Thirty three files carried the dead address, most of them as a "Bitbucket
download site" for a board's toolchain. There are no downloads to offer, so
those now name the repository, and the surrounding prose says so.
The other dead Bitbucket addresses are left alone: nuttx/nuttx, nuttx/tools,
nuttx/uclibc and nuttx/nxwidgets need a decision each about what replaces
them, which is not this patch. patacongo/obsoleted is still there.
Assisted-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Signed-off-by: Marco Casaroli <marco.casaroli@gmail.com>
Add a "fastboot_usb" section to the waveshare-rp2040-zero and
waveshare-rp2040-lcd-1.28 board doc pages, describing the USB fastboot
composite configuration added by the previous commits: fastbootd runs
on boot instead of NSH, composed together with CDC/ACM for the
console, and reachable on the host via fastboot devices/getvar/reboot.
Assisted-by: OpenCode:claude-sonnet-5
Signed-off-by: wangjianyu3 <wangjianyu3@xiaomi.com>
Drives the speed of the four application cores. The rate is set to any
of the operating points the vendor validates, all of which share a core
voltage, so this touches no regulator.
The cores run from the PLL being reprogrammed, so they park on a slower
clock first, through a selector the vendor names as glitch free. While
parked the PLL is stopped, given new dividers, restarted and watched
until it locks; if it never locks the cores stay parked, since returning
them to an unlocked PLL does not fail safely.
Above a gigahertz the bus ratio must be two to one before the cores
return: the bus fabric does not reach beyond about eight hundred
megahertz. That is the one step in the sequence software cannot recover
from, so the mux is moved before the ratio.
The rate is measured rather than derived. The cores are counted against
the crystal derived time counter and the result reported beside what the
clock tree computes, because the manual and the vendor's code number the
CPU PLL's outputs differently. The core selector's parent is
cpupll_fout1, and the three CPU PLL outputs are marked
CLK_GET_RATE_NOCACHE since this driver reprograms that PLL at run time.
Assisted-by: Claude:claude-opus-5
Signed-off-by: Justin Hammond <justin@dynam.ac>
Add a Testing section for sim:tflm and document Makefile tflm_hello,
AllocateTensors, and generic ops so the in-tree docs match the apps
TFLM changes.
Assisted-by: Cursor:Grok-4.6
Signed-off-by: Abhishek Mishra <mishra.abhishek2808@gmail.com>
The apps tree is apps/mlearning, but documentation lived under the
misspelled mlearing path as title-only stubs. TensorFlow Lite Micro and
standalone CMSIS-NN had no pages.
Rename the directory to mlearning, document each package from the
current Kconfig and build files, and add the sim:tflm board
configuration.
Assisted-by: Cursor:Grok-4.6
Signed-off-by: Abhishek Mishra <mishra.abhishek2808@gmail.com>
Wire the RTL8721F (amebagreen2) into the shared Ameba timer driver
(arch/arm/src/common/ameba/ameba_timer.c), registered at /dev/timer0
(TIM1) and /dev/timer1 (TIM2). Only the per-chip base addresses, RCC
masks and IRQs differ, so this adds a small ameba_timer_chip.h (the two
32-bit basic LTIM timers at 0x40819200 / 0x40819400, 32.768 kHz,
APBPeriph_LTIM1/2, IRQ_TIMER1/2, verified against the SoC hal_platform.h
/ sysreg_lsys.h / vector table) plus the Make.defs/CMakeLists build
hooks, the fwlib ram_common/ameba_tim.c RAM source (now also pulled in
by CONFIG_AMEBA_TIMER, matching the PWM rule), the board bring-up
registration and a timer defconfig. The shared driver is unchanged.
TIM0 is left untouched because the boot ROM claims it as the always-on
system timer; reprogramming it would break every SDK delay.
Assisted-by: Claude <noreply@anthropic.com>
Signed-off-by: dechao_gong <dechao_gong@realsil.com.cn>
Wire the RTL8720F into the shared Ameba timer driver
(arch/arm/src/common/ameba/ameba_timer.c), registered at /dev/timer0
(TIM1) and /dev/timer1 (TIM2). Only the per-chip base addresses, RCC
masks and IRQs differ, so this adds a small ameba_timer_chip.h (the two
32-bit basic LTIM timers at 0x40808200 / 0x40808400, 32.768 kHz,
APBPeriph_LTIM1/2, IRQ_TIMER1/2, verified against the SoC hal_platform.h
/ sysreg_lsys.h / vector table) plus the Make.defs/CMakeLists build
hooks, the fwlib ram_common/ameba_tim.c RAM source (now also pulled in
by CONFIG_AMEBA_TIMER, matching the PWM rule), the board bring-up
registration and a timer defconfig. The shared driver is unchanged.
TIM0 is left untouched because the boot ROM claims it as the always-on
system timer; reprogramming it would break every SDK delay.
Assisted-by: Claude <noreply@anthropic.com>
Signed-off-by: dechao_gong <dechao_gong@realsil.com.cn>
Add a parameterised NuttX timer lower-half for the Realtek Ameba
general-purpose timers, sitting on the SDK fwlib RTIM register layer and
registered at /dev/timerN. The shared driver
(arch/arm/src/common/ameba/ameba_timer.c) reads a per-chip instance
table (ameba_timer_chip.h) for each timer's base, input clock, RCC gate
masks and IRQ; the period is programmed directly in microseconds and
converted to the 32-bit auto-reload with one clkfreq formula.
On the pke8721daf two of the 32.768 kHz "basic" (LTIM) timers are
exposed: /dev/timer0 is TIM1 and /dev/timer1 is TIM2. TIM0 is left
untouched because the boot ROM claims it as the always-on system timer
(SYSTIMER); reprogramming it would break every SDK delay. The RTIM
time-base entry points resolve to ROM, while the interrupt-clear and
period-change helpers come from the fwlib RAM source ameba_tim.c (shared
with the PWM driver).
Verified on hardware with examples/timer against both devices: the
update interrupt fires at the requested 1 s interval (measured with the
independent ROM SYSTIMER = 32768 ticks = 1.000 s).
Also whitelist the vendor RTIM_ symbol prefix in tools/nxstyle.c,
alongside the existing RCC_/SYSTIMER_ Ameba SDK entries.
Assisted-by: Claude <noreply@anthropic.com>
Signed-off-by: dechao_gong <dechao_gong@realsil.com.cn>
The Tab5 ships in two hardware variants and the board supported only
one of them. The earlier units carry an ILI9881C panel and a GT911
touch controller, the later ones a ST7121/ST7123 panel and a ST7123
touch controller, and the two always come as a pair. On an earlier
unit the panel stays lit but black, and the touch bring-up fails with
"failed to register ST7123: -5".
Add the ILI9881C initialization table, taken from the Espressif BSP,
along with the display timings it needs, which differ from the ST7123
ones in the DPI clock (60 MHz instead of 70 MHz) and in every porch.
The panel identification lives on command page 1 and is read and
logged during bring-up, so the boot log says which panel answered.
Add the GT911 to the touch controller choice. These units have a
pull-up to 3V3 on the touch interrupt line that keeps the controller
from scanning, so the line is driven low instead of being used as an
interrupt, and contacts are picked up when the device is read. The
controller identification is logged the same way.
Split esp32p4_touch.c into one file per controller, which is how the
panels are already handled, and document both variants together with
the I2C scan that tells which one is fitted. The defaults are
unchanged, so an existing configuration still selects the ST7121
panel and the ST7123 touch controller.
Signed-off-by: Jorge Guzman <jorge.gzm@gmail.com>
Adopt the zbus message bus on the linum-stm32h753bi (first adopter
board):
- scripts/flash.ld: include the iterable sections common fragments
(2 lines: common-rom.ld inside .text, common-ram.ld inside .data).
- configs/zbus/defconfig: board configuration enabling zbus with all
observer types, the zbus example and its cmocka test suite
(./tools/configure.sh linum-stm32h753bi:zbus).
- Board documentation: describe the new configuration.
Validated on hardware: the 16-test cmocka suite passes twice in the
same boot and the zbus example produces the expected output.
Assisted-by: Claude Code
Signed-off-by: Jorge Guzman <jorge.gzm@gmail.com>
