Add new RISC-V 64-bit QEMU configuration with:
- 64-bit RISC-V (RV64) architecture support
- RISC-V Vector Extension (RVV/V-extension) enabled
- LVGL graphics framework integration
- VirtIO GPU and input device support
- NSH shell with built-in applications
This configuration enables developers to build and test LVGL graphical
applications on 64-bit RISC-V targets with Vector extension support,
providing a foundation for future SIMD optimization work.
Includes:
- defconfig: Complete configuration file with all necessary options
- Updated index.rst: Build and run instructions with QEMU launch command
Signed-off-by: rongyichang <rongyichang@xiaomi.com>
Add support for the QMI8658 6-axis IMU sensor (accelerometer + gyroscope)
on the lckfb-szpi-esp32s3 board.
Changes:
- New esp32s3_qmi8658.c driver initializes sensor on I2C0 at address 0x6A
- Registers uORB devices: /dev/uorb/sensor_accel0 and /dev/uorb/sensor_gyro0
- Adds esp32s3_qmi8658_initialize() function declaration to header
- Integrates with board bringup when CONFIG_SENSORS_QMI8658=y
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
The secure CPU variant of vexriscv immediately panics after bring up.
However, the linux CPU variant of the vexriscv core does work successfully.
Signed-off-by: Justin Erenkrantz <justin@erenkrantz.com>
Updates the docs to the new esp32c3-devkit naming, after deprecating support
for now esp32c3-legacy.
Signed-off-by: Filipe Cavalcanti <filipe.cavalcanti@espressif.com>
This patch adds support for Two-Wire interface in AVR Dx chips.
Only master mode is supported in this version.
The driver was tested using TC74Ax thermal sensor and simple application
that read the temperature from it. (Driver for the sensor is not in-tree.)
Signed-off-by: Kerogit <kr.git@kerogit.eu>
Support for hardware accelerated HMAC-SHA(1/256) for ESP32
was added, this commit updates the documentation to reflect
this as well.
Signed-off-by: Vlad Pruteanu <pruteanuvlad1611@yahoo.com>
- Updated information about the RA4M1 microcontroller capabilities, including the General Purpose Timer (GPT).
- Added information about the PWM driver support for the Arduino R4 Minima board using the GPT timer.
Signed-off-by: leocafonso <leocafonso@gmail.com>
Gdbstub support
===========
The Qemu version must be above 9.2 to support two serial ports.
One window:
./tools/configure.sh qemu-armv7a:gdbstub; make -j25
qemu-system-arm -cpu cortex-a7 -nographic -machine virt,virtualization=off,gic-version=2 -net none -kernel ./nuttx -serial mon:stdio -serial pty
char device redirected to /dev/pts/26 (label serial1)
nx_start: Entry
uart_register: Registering /dev/console
uart_register: Registering /dev/ttyS0
Another window:
gdb-multiarch nuttx -ex "target remot /dev/pts/26"
GNU gdb (Ubuntu 15.0.50.20240403-0ubuntu1) 15.0.50.20240403-git
Copyright (C) 2024 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Type "show copying" and "show warranty" for details.
This GDB was configured as "x86_64-linux-gnu".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<https://www.gnu.org/software/gdb/bugs/>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
For help, type "help".
Type "apropos word" to search for commands related to "word"...
Reading symbols from nuttx...
Remote debugging using /dev/pts/26
gdb_get_registers (state=0x402052f8) at gdbstub/lib_gdbstub.c:1020
1020 reg = state->running_regs;
(gdb) c
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Add description of new graphics configuration, and indicate HDMI video
output support (with notes) in the supported peripherals table.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
Gdbstub demo::
The Qemu version must be above 9.2 to support two serial ports.
One window:
./tools/configure.sh qemu-armv8a:gdbstub; make -j25
qemu-system-aarch64 -cpu cortex-a53 -nographic -machine virt,virtualization=on,gic-version=3 -net none -kernel ./nuttx -serial mon:stdio -serial pty
char device redirected to /dev/pts/27 (label serial1)
- Ready to Boot Primary CPU
- Boot from EL2
- Boot from EL1
- Boot to C runtime for OS Initialize
Another window:
gdb-multiarch nuttx -ex "target remot /dev/pts/27"
GNU gdb (Ubuntu 15.0.50.20240403-0ubuntu1) 15.0.50.20240403-git
Copyright (C) 2024 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Type "show copying" and "show warranty" for details.
This GDB was configured as "x86_64-linux-gnu".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<https://www.gnu.org/software/gdb/bugs/>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
For help, type "help".
Type "apropos word" to search for commands related to "word"...
Reading symbols from nuttx...
Remote debugging using /dev/pts/26
gdb_get_registers (state=0x403e1590) at gdbstub/lib_gdbstub.c:1020
1020 reg = state->running_regs;
(gdb) c
Signed-off-by: hujun5 <hujun5@xiaomi.com>
The documentation is now updated to reflect the new EMMC support. I have
also improved the format to match the standard board documentation
template, and included better support descriptions for features that
have varying levels of implementation.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
Adding the stm32h5 pwm driver. This is almost an exact copy of the stm32h7 pwm driver. I confirmed the timers for the h5 are version v2 and added the preprocessor definition. This commit was tested on a stm32h5 nucleo-h563zi development board. Necessary board files and a pwm config have been added. Added pin mappings for all timer outputs.
Signed-off-by: kywwilson11 <kwilson@2g-eng.com>
Added documentation regarding nucleo-h563zi:pwm config.
Removed CONFIG_STM32H5_PWM guard at the top. Fixed IRQs for tim1 and tim8. Added H5 to list of Timer IP v2 timers.
Conditionally compile stm32_serial.c.
Add stm32_pwm.c to CMakeLists.txt
Migrated legacy README.txt documentation to RST format which aligns with
the standard template for board documentation.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
Migrated legacy README.txt documentation to RST format following the
standard board documentation template.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
Migrate README.txt about ROMFS to SIM documentation in RST format. Also
cleans up the formatting of the board documentation to leverage RST's
features.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
Migrate the legacy README.txt documentation file to RST format following
the standard board template.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
Added ioctls and functions for watchdogs 2 & 3. Modifed wdog1 functions. Needs testing.
Fixed issues with started variable.
Change to add only 3 ioctls, a config for each watchdog. Created cfg structures for watchdog1 and watchdog23. Added code to set difsel register. stop conversions before changing watchdog configs. Other logic changes.
Define AN_STM32H5_FIRST and AN_STM32H5_NCMDS in nuttx/analog/ioctl.h
Remove hardcoded AN_STM32H5_FIRST.
Style fixes.
Fix thershold for watchdog1
Got working watchdog driver with queue and signal. Needs polish.
Refined isr for watchdogs. Added value back to event. value is more accurate, but not guaranteed. It accomdates dma.
Used stm32_adc_sigcfg_s structure inside stm32_adc_sig_s structure. Used common naming for ioctls.
Added stopifstarted and startifstopped for setting watchdogs and other bits. Added adc_reset_dma, which must be run after stopping conversions in circular mode, because buffer and conversions become misaligned. Other refinements.
Added guard around adc_reset_dma, added comment blocks to new functions
NuttX style fixes.
Add return value to wdog configure functions.
Correct number of stm32h5 adc ioctls.
Minor style fix.
Reduce watchdog commit to fit NuttX standards. Remove Queue and Signal aspects. Added Kconfig to initialize watchdog.
Signed-off-by: kywwilson11 <kwilson@2g-eng.com>
Added guard around code referencing priv->circular. Added adc_watchdog config for testing watchdog1 with adc1. Added documentation about adc_watchdog config.
Adjusted documentation for adc_watchdog config. Added detailed test procedure.
Longer underline under adc_watchdog title.
Add code for differential adc calibration. Need to calibrate both single-ended and differential if a given adc has both single-ended and differential channels.
Fixed typo.
Initialize watchdog1 parameters at compile time when configured. Added comments to new elements in stm32_dev_s. Confirmed style is good.
Add proper guards around ADC WDG1 variables and functions.
Implemented feedback per raiden00. 1. Changed to use old chanlist type uint8_t. 2. Added smpr1, smpr2, and difsel variables to stm32_dev_s structure. 2. smpr1 and smpr2 are initialized to board defined values if BOARD_ADCx_SMPRx is defined, otherwise initialized to default. 3. difsel initialized to BOARD_ADCx_DIFSEL if defined, otherwise use default (0) for all single-ended.
This commit adds an entry on Documentation regarding ESP32-C3,
ESP32-C6 and ESP32-H2 boards that implement the `buttons` defconfig
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
Add documentation for the WeAct STM32H750 board, including
board features, LED configuration, UART setup, SDMMC interface, available
configurations (nsh, usbnsh, sdcard, st7735), and flashing instructions
via DFU and SWD.
Signed-off-by: Sergey Rzhevsky <rzsa@yandex.ru>
