Summary:
In order to reduce the cost of using coredump, we disable BOARD_COREDUMP_COMPRESSION by default when it is not necessary.
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
This commit introduces support for querying TSC frequency using CPUID 0x40000010. This function can be tested with the following command: `sudo qemu-system-x86_64 -enable-kvm -cpu host,+invtsc,+vmware-cpuid-freq -m 2G -kernel nuttx -nographic -serial mon:stdio -s`
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
To avoid level-1 interrupt break retrieve PC/A0/SP/A2 register,
PS.EXCM set to 1 by CPU HW while handling exception/interrupt.
But if context switching happens and new thread created,
the thread initial value of PS.EXCM is used.
Same behevior as ESP-IDF code:
https://github.com/espressif/esp-idf/blob/master/
components/freertos/FreeRTOS-Kernel/portable/xtensa/port.c#L366
Signed-off-by: Gao Feng <Feng.Gao@sony.com>
Add initial support for Seeed Studio XIAO RP2350 Board. Initial
support includes serial and usb NuttShell, and a combo
configuration for gpio, leds and ws2812.
Signed-off-by: Rodrigo Sim <rcsim10@gmail.com>
Fix build and initialization issues on EFuses using MCUBoot for RISC-V based Espressif devices
Signed-off-by: Eren Terzioglu <eren.terzioglu@espressif.com>
Summary:
When the operating environment does not support virtio-9p and the virtio-9p server driver is not provided, -ENODEV should be returned for virtio-9p to avoid crash caused by continued execution.
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
In a recent patch the socketcan timestamp generation was moved
to add it also when there is an active reader (previously the timestamp
was only added before storing the CAN frame in the read-ahead list).
It was working fine but I realized that the can_callback function is
also called when sending frames. In this case, the IO block is not allocated
yet and the code breaks.
This PR is to only generate the timestamp if the IO block is not NULL
(reading path) and skip it when it is NULL (sending path)
Signed-off-by: Javier Casas <javiercasas@geotab.com>
When a udp frame is processed without a listener a icmp frame is
returned indicating that there is no listener. The PR enables
sending this icmpv6 response over sixlowpan.
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
The kernel mapping should be performed in sem_wait (thread level) as
virtual memory mappings cannot be added from interrupt, at least for now.
The reason?
kmm_map() depends on mm_map_add(), which in turn uses a mutex for mutual
exclusion. Using mutexes from interrupt level is not permitted.
Mapping tcb->waitobj into kernel virtual memory directly in sem_wait()
makes sense, since accessing tcb->waitobj via a user virtual address can
lead to unexpected results (the wrong mappings can be in place).
Add the mtimer _tick operations for use when tickless mode is not used.
This corrects the tick-based timing calculations, removing tick timer drift
and rounding errors causing early wdog expirations.
Signed-off-by: Jukka Laitinen <jukka.laitinen@tii.ae>
I found that the gpio example code can't be tested on nrf5340-dk.
Enabling CONFIG_DEV_GPIO wouldn't register gpio pins as /dev/gpio*.
NRF5340-dk has 4 LEDs and 4 User Buttons.
By setting CONFIG_DEV_GPIO=y,
- 4 LEDs will be configured as GPIO outputs
- 2 Buttons as GPIO inputs, and
- 2 Buttons as GPIO interrupt inputs
This PR will allows user to test GPIO examples on NRF5340-dk board.
Signed-off-by: Aung Khant Maw <aungkhantmaw64@gmail.com>
Use the CDCACM as a SYSLOG output device, send message to remote proc.
If there are more than one CDCACM devices, then a device minor number
may also need to be provided. Default: 0
Signed-off-by: yangsong8 <yangsong8@xiaomi.com>
Add support for the STM32H5 ICACHE peripheral. The CortexM33 does not have typical embedded icache and dcache. Instead STM32H5 provides the ICACHE as a separate peripheral that needs to be configured. This commit adds the stm32h5 specific icache driver. This driver named functions like those in <nuttx/cache.h>. However since the CortexM33 does not have cache itself, ARCH_ICACHE is not enabled. Therefore these stm32h5 specific functions were developed.
Signed-off-by: kywwilson11 <kwilson@2g-eng.com>
This commit addresses an issue where calling `wd_cancel_period` within the periodic watchdog callback would fail to cancel the watchdog timer.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
This prevents CI from testing esp32s3-devkit:python automatically,
avoiding it to be overloaded. Manual testing can be triggered to
test xtensa-03.dat.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
I found an issue when using SPI with nbits=8: SPI reads return unreliable
results because SPI ignores nbits value and always performs 16-bit reads.
Signed-off-by: Daniel Martín Gómez <danielmartingomez@geotab.com>
Fix build error with the following condition.
- CONFIG_BOARD_CRASHDUMP_CUSTOM=y
- CONFIG_COREDUMP=n
The condition for calling `coredump_initialize()` is incorrect.
CONFIG_BOARD_CRASHDUMP_CUSTOM is not dependent on CONFIG_COREDUMP.
Signed-off-by: SPRESENSE <41312067+SPRESENSE@users.noreply.github.com>
Fix timestamp in socket CAN. Right now the timestamp is only generated
if there is no reader and the frame is stored in the read ahead list.
This is solved by moving the timestamp generation before the code flow
branch.
Signed-off-by: Javier Casas <javiercasas@geotab.com>
This PR adds a photo of PINE64 StarPro64 SBC to the StarPro64 page.
I shot the photo myself with a Sony NEX-7 camera.
Signed-off-by: Lup Yuen Lee <luppy@appkaki.com>
radio transceivers. This initial support includes transmit and receive
functionality and configuration and reading of radio parameters like
frequency and bandwidth.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
ifdelay description (delay between frames) matches the DLYBCT field
(delay between consecutive transfers without removing chip select)
much better compared to stopdelay (delay between last CLK and CS
innactive). The option for stopdelay does not seem to be configurable
in SAMv7 peripheral.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
This PR adds support for the PINE64 StarPro64 64-bit RISC-V SBC,
based on ESWIN EIC7700X SoC. Most of the code was derived from NuttX
for Milk-V Duo S (SOPHGO SG2000). The modified code is explained here:
https://lupyuen.github.io/articles/starpro64#appendix-port-nuttx-to-starpro64
`platforms/risc-v/eic7700x/index.rst`:
Added StarPro64 to EIC7700X SoC
`platforms/risc-v/eic7700x/boards/starpro64/index.rst`:
Building and booting NuttX for StarPro64
Signed-off-by: Lup Yuen Lee <luppy@appkaki.com>
This PR adds support for the PINE64 StarPro64 64-bit RISC-V SBC,
based on ESWIN EIC7700X SoC. Most of the code was derived from NuttX
for Milk-V Duo S (SOPHGO SG2000). The modified code is explained here:
https://lupyuen.github.io/articles/starpro64#appendix-port-nuttx-to-starpro64
Modified Files:
boards/Kconfig: Added StarPro64 board
New Files in boards/risc-v/eic7700x/starpro64:
src/eic7700x_appinit.c: Startup Code
include/board.h: StarPro64 Definitions
include/board_memorymap.h: Memory Map
src/etc/init.d/rc.sysinit, rcS: Startup Script
src/.gitignore: Ignore the tmp filesystem
scripts/ld.script: Linker Script
scripts/Make.defs: StarPro64 Makefile
src/Makefile: StarPro64 Makefile
Kconfig: StarPro64 Config
configs/nsh/defconfig: Build Config for starpro64:nsh
Signed-off-by: Lup Yuen Lee <luppy@appkaki.com>
Data form serial framework will be written to usb reqbuf directly,
and data form cdcacm will be read form reqbuf directly.
Signed-off-by: yangsong8 <yangsong8@xiaomi.com>
