POSIX leaves the signedness of time_t and clock_t unspecified, but
mainstream implementations (Linux glibc/musl, the BSDs, macOS, RTEMS,
Zephyr's POSIX layer, Windows _time64) expose time_t as signed 64-bit.
NuttX has historically used uint64_t only because it was tied to the
CONFIG_SYSTEM_TIME64 knob; with that gone, switch:
time_t : uint64_t -> int64_t
clock_t : uint64_t -> int64_t
CLOCK_MAX: UINT64_MAX -> INT64_MAX
This lets (time_t)-1 sentinels, negative tick deltas, and host-side
headers behave as on every other POSIX system without source churn.
Headers updated:
- include/sys/types.h, include/limits.h, include/nuttx/clock.h
- include/nuttx/fs/hostfs.h (nuttx_time_t alias)
- include/nuttx/{mqueue.h,wdog.h,wqueue.h,timers/clkcnt.h}
Because clock_t is now signed 64-bit, the NuttX-internal sclock_t
alias becomes redundant: every sclock_t/SCLOCK_MAX use is folded
back to clock_t/CLOCK_MAX (notably in sched/wdog, sched/mqueue,
sched/sched, sched/clock, sched/timer, libs/libc/time, fs/vfs and
the drivers/arch consumers below).
Tick/period constants (NSEC_PER_SEC, USEC_PER_SEC, MSEC_PER_SEC,
SEC_PER_MIN, ...) in include/nuttx/clock.h are retyped from "long"
literals to INT64_C(...) so that 64-bit arithmetic no longer
depends on the host's long width.
Strip now-redundant (time_t)/(clock_t)/(unsigned long) casts and
unsigned-only branches across the tree:
- arch RTC / oneshot / tickless lowerhalfs:
arm: cxd56xx, efm32, imxrt, lc823450, max326xx, sam34, sama5,
samd5e5, samv7, stm32, stm32f7, stm32h7, stm32l4, stm32wb,
xmc4
mips: pic32mz sparc: bm3803 x86_64: intel64
risc-v/xtensa: espressif (esp_i2c[_slave], esp_rtc,
esp32c3{_i2c,_rtc,_wifi_adapter}, esp32{,s2,s3}_*),
mpfs_perf
- drivers: audio/tone, input/aw86225, power/pm/{activity,
stability}_governor, rpmsg/rpmsg_ping,
timers/{ds3231,mcp794xx,pcf85263,rx8010},
wireless/ieee80211/bcm43xxx, wireless/spirit/spirit_spi
- core: fs/vfs/{fs_poll,fs_timerfd}, mm/iob/iob_alloc,
libs/libc/{netdb/lib_dnscache,time/{lib_calendar2utc,
lib_time}}, net/icmp/icmp_pmtu, net/icmpv6/icmpv6_pmtu,
net/ipfrag, net/tcp/{tcp.h,tcp_timer},
net/utils/net_snoop, net/mld/mld_query (drop the now-dead
mld_mrc2mrd helper since signed math handles it directly),
sched/clock/{clock,clock_initialize},
sched/sched/{sched_profil,sched_setparam,sched_setscheduler},
sched/pthread/pthread_create,
sched/wdog/{wd_gettime,wd_start,wdog.h},
sched/timer/timer_gettime, sched/mqueue/*
Flip the few in-tree printf format strings that assumed an
unsigned 64-bit tv_sec:
* drivers/rpmsg/rpmsg_ping.c PRIu64 -> PRId64
* arch/xtensa/src/esp32{,s2,s3}/esp32*_oneshot_lowerhalf.c
PRIu32 (already wrong) -> PRId64
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
debug.h is a NuttX-specific, non-POSIX header. Placing it in the
top-level include/ directory creates naming conflicts with external
projects that define their own debug.h.
This commit moves the canonical header to include/nuttx/debug.h,
following the NuttX convention for non-POSIX/non-standard headers,
and updates all in-tree references.
A backward-compatibility shim is left at include/debug.h that
emits a deprecation #warning and re-includes <nuttx/debug.h>,
allowing out-of-tree code to continue building while migrating.
Signed-off-by: Piyush Patle <piyushpatle228@gmail.com>
Implement Linux-compatible TFD_TIMER_CANCEL_ON_SET flag for timerfd to
allow applications to detect discontinuous changes to CLOCK_REALTIME.
Background:
According to Linux timerfd_create(2) man page, when a timerfd is created
with CLOCK_REALTIME and TFD_TIMER_CANCEL_ON_SET flag is specified, the
read() operation should fail with ECANCELED if the real-time clock
undergoes a discontinuous change. This allows applications to detect
and respond to system time changes.
Implementation:
1. Add clock notifier infrastructure (clock_notifier.h/c) to notify
interested parties when system time changes
2. Implement TFD_TIMER_CANCEL_ON_SET flag support in timerfd
3. Register timerfd with clock notifier when flag is set
4. Cancel timer and return ECANCELED when clock change is detected
5. Notify clock changes in:
- clock_settime()
- clock_initialize()
- clock_timekeeping_set_wall_time()
- rpmsg_rtc time synchronization
Changes include:
- New files: include/nuttx/clock_notifier.h, sched/clock/clock_notifier.c
- Modified: fs/vfs/fs_timerfd.c to handle TFD_TIMER_CANCEL_ON_SET
- Modified: clock subsystem to call notifier chain on time changes
- Modified: rpmsg_rtc to notify time changes during sync
Use case example:
Applications using timerfd with absolute time can now detect when
system time is adjusted (e.g., NTP sync, manual time change) and
take appropriate action such as recalculating timeouts or updating
scheduled events.
Reference: https://man7.org/linux/man-pages/man2/timerfd_create.2.html
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
Fix MISRA Rule 10.3 exist clock to sclock cause wide type implicit conversion to narrow type, NSEC_PER_USEC to l
Signed-off-by: jiangtao16 <jiangtao16@xiaomi.com>
This patch is a rework of the NuttX file descriptor implementation. The
goal is two-fold:
1. Improve POSIX compliance. The old implementation tied file description
to inode only, not the file struct. POSIX however dictates otherwise.
2. Fix a bug with descriptor duplication (dup2() and dup3()). There is
an existing race condition with this POSIX API that currently results
in a kernel side crash.
The crash occurs when a partially open / closed file descriptor is
duplicated. The reason for the crash is that even if the descriptor is
closed, the file might still be in use by the kernel (due to e.g. ongoing
write to file). The open file data is changed by file_dup3() and this
causes a crash in the device / drivers themselves as they lose access to
the inode and private data.
The fix is done by separating struct file into file and file descriptor
structs. The file struct can live on even if the descriptor is closed,
fixing the crash. This also fixes the POSIX issue, as two descriptors
can now point to the same file.
Signed-off-by: Ville Juven <ville.juven@unikie.com>
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
This patch fixed userspace headers conflict. Architecture-related definition and API should not be exposed to users.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
Summary:
1.Add configuration to allocate memory from the specified section
2.Replace all memory operations (kmm_) in the vfs with
fs_heap_. When FS_HEAPSIZE > 0, memory is requested for the file system by specifying a configured heap location. By default (i.e. FS_HEAPSIZE=0) fs_heap_ is equivalent to kmm_
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
Summary:
1.Modified the i_crefs from int16_t to atomic_int
2.Modified the i_crefs add, delete, read, and initialize interfaces to atomic operations
The purpose of this change is to avoid deadlock in cross-core scenarios, where A Core blocks B Core’s request for a write operation to A Core when A Core requests a read operation to B Core.
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
Using the ts/tick conversion functions provided in clock.h
Do this caused we want speed up the time calculation, so change:
clock_time2ticks, clock_ticks2time, clock_timespec_add,
clock_timespec_compare, clock_timespec_subtract... to MACRO
Signed-off-by: ligd <liguiding1@xiaomi.com>
nx_open in timerfd_create will increase reference count,
Therefore, the reference count starts with a value of 0.
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
1.Don't check the return value of nxsem_init or nxmutex_init
2.Fix some style issue
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
here is the reason:
1.clock_systime_timespec(core function) always exist regardless the setting
2.CLOCK_MONOTONIC is a foundamental clock type required by many places
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
