Add support for ST7123 touchscreen controller (I2C only).
It requires board level init to register a callback, as polling
mode is not supported.
Signed-off-by: Filipe Cavalcanti <filipe.cavalcanti@espressif.com>
As analyzed, the NuttX initial keyboard API design uses event
type KBD_SPECPRESS/KBD_SPECREL to deliver special keys
and KBD_PRESS/KBD_RELEASE to deliver ASCII codes.
But it seems that this design choice has not been followed
in virtio-input, goldfish_events and sim_keyboard designs
and result is that external keyboard special keys events
are mapped to KEYCODE_xxx values which start from 0 and
overlaps with ASCII keys.
The issue is tracked under #19527 number.
This set of changes correct events reporting for mentioned
keyboards to report right event type for special keys.
The solution is only partial at this phase.
Virtual and more complex keyboards usually deliver
key pressures as scancodes (key position on keyboard)
and mapping to ASCII for keys which corresponds to letter
and other similar keys lacks mapping of national alphabets,
second row symbols and switch to capital letter according
to modifiers.
Signed-off-by: Pavel Pisa <pisa@fel.cvut.cz>
This driver adds support to MPR121 Capacitive Keypad usually found
at Aliexpress. The MPR121 is a touch sensor chip from Freescale/NXP
that supports up to 12 sensor electrodes and 1 proximity electrode.
Signed-off-by: Alan C. Assis <acassis@gmail.com>
Add a generic kmatrix lower-half with polling/debounce, STM32 board adapters, Kconfig options, a public API header, and a test example/documentation.
Signed-off-by: Felipe Moura <moura.fmo@gmail.com>
decouple kbd / keypad.
Fix some comments
add documentation
fix rule issues
Update CMakeLists.txt
update documentation.
improve documentation
This commit creates a sbutton device that uses a single button to
create a keyboard driver that returns TAB or ENTER depending how
long the user keeps the button pressed.
Signed-off-by: Alan C. Assis <acassis@gmail.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Add new driver frameworks: force feedback for vibrator, like linux,
unify vendor vibrator driver using.
Incorporating a force feedback-based driving framework to replace the
conventional driver/motor setup for controlling vibrators not only
enhances the precision and responsiveness of the haptic feedback but
also aligns better with the advancements in Linux-based driver systems.
refs docs link: https://www.kernel.org/doc/html/v4.19/input/ff.html
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
1. Update all CMakeLists.txt to adapt to new layout
2. Fix cmake build break
3. Update all new file license
4. Fully compatible with current compilation environment(use configure.sh or cmake as you choose)
------------------
How to test
From within nuttx/. Configure:
cmake -B build -DBOARD_CONFIG=sim/nsh -GNinja
cmake -B build -DBOARD_CONFIG=sim:nsh -GNinja
cmake -B build -DBOARD_CONFIG=sabre-6quad/smp -GNinja
cmake -B build -DBOARD_CONFIG=lm3s6965-ek/qemu-flat -GNinja
(or full path in custom board) :
cmake -B build -DBOARD_CONFIG=$PWD/boards/sim/sim/sim/configs/nsh -GNinja
This uses ninja generator (install with sudo apt install ninja-build). To build:
$ cmake --build build
menuconfig:
$ cmake --build build -t menuconfig
--------------------------
2. cmake/build: reformat the cmake style by cmake-format
https://github.com/cheshirekow/cmake_format
$ pip install cmakelang
$ for i in `find -name CMakeLists.txt`;do cmake-format $i -o $i;done
$ for i in `find -name *\.cmake`;do cmake-format $i -o $i;done
Co-authored-by: Matias N <matias@protobits.dev>
Signed-off-by: chao an <anchao@xiaomi.com>
