Add ES7210 audio ADC driver for NuttX implementing the audio
lower-half interface. Supports 4-channel recording via I2S with
configurable sample rate, bit depth, and mic gain.
- drivers/audio/es7210.c: Codec driver using LPWORK for async buffer
management, I2C register access, and NuttX audio buffer management
- drivers/audio/es7210.h: Internal register definitions and macros
- include/nuttx/audio/es7210.h: Public header with platform config
structure and es7210_initialize() API
- drivers/audio/Kconfig, Make.defs, CMakeLists.txt: Build system
integration for CONFIG_AUDIO_ES7210
Key implementation details:
- ES7210_SDP_NORMAL (normal I2S) instead of TDM, matching NuttX
I2S standard Philips mode
- ES7210_ADC_PGA_POWER_ON bit in gain registers REG43-46, required
for analog front-end amplifier power-on
- 50ms startup delay in es7210_start for codec clock stabilization
- I2S_IOCTL(AUDIOIOC_STOP) in es7210_stop to notify I2S layer,
preventing DMA from running without buffers after stop
Signed-off-by: wangjianyu3 <wangjianyu3@xiaomi.com>
The fake audio driver aims to easily simulate the functions of audio driver through reading and writing files.
With it, you can conveniently customize and define various capture or playback audio drivers for debugging or automated testing.
Signed-off-by: yaojingwei <yaojingwei@xiaomi.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Ken Pettit has submitted the ICLA and we can migrate the licenses
to Apache.
Sebastien Lorquet has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Add basic sample rate conversion to the CXD56 Spresense audio
driver using libsamplerate. Currently conversion is only done
during playback and all output is fixed at 48 kHz.
Issues:
- 16 kHz SRC has glitches (unless data dump is enabled)
- 44.1 kHz SRC gets stuck
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Adds an initial Nuttx audio driver supporting the Spresense CXD56.
Being a work in progress the driver has a number of limitations:
- Audio playback only, no recording yet.
- Only 16 bit stereo playback is supported.
- In practice only 48kHz playback is supported due to missing SRC.
- Configure driver in "Device Drivers --> Audio Device Support".
