This commit updates the common-source integration for Xtensa-based
Espressif devices (ESP32, ESP32-S2, and ESP32-S3). This is part of a larger
common-source update split by architecture for better maintainability.
Major components updated:
- IRQ allocator refactoring with intr_alloc integration
- Common-source drivers (GPIO, RMT, I2C, SPI, UART, etc.)
- Espressif components upgrade to release/master.b-test
- Peripheral drivers (ADC, PWM, LEDC, MCPWM, PCNT, Temperature Sensor, etc.)
- Wireless adapters (Wi-Fi and BLE)
- esp_timer migration to the common-source path for Xtensa devices
- Common-source power management implementation (auto-sleep and wakeup paths)
- Board defconfigs for all Xtensa Espressif boards
- SMP support improvements for ESP32-S3
- Critical section handling improvements
Key architectural changes:
- IRQ Allocator: The new interrupt allocator enables multiple mapping
options from interrupt sources to CPU interrupts, providing flexibility
required by modern peripherals. Although this introduces breaking changes
to the interrupt handling API, the required ARCH_MINIMAL_VECTORTABLE
Kconfig option is explicitly checked during startup to ensure proper
configuration. This validation prevents runtime issues from configuration
mismatches.
- Xtensa-specific interrupt handling via esp_xtensa_intr.c providing
NuttX-native implementations of xt_ints_on/off and interrupt handlers,
avoiding conflicts with NuttX's core Xtensa macros.
- Timer/RTC unification: ESP32/ESP32-S2/ESP32-S3 move from chip-specific
RTC/RT-timer code to common-source Espressif integration, including
esp_timer_adapter/esp_rtc paths and the required bringup/defconfig updates.
- Power management consolidation: Xtensa PM follows the common-source
implementation, including common-source auto-sleep behavior, UART/Wi-Fi
wakeup coordination, and tickless-safe sleep flow compatibility.
Note: This is a large commit to maintain bisectability. Breaking the
changes into smaller commits would result in non-building intermediate
states across the common-source infrastructure update.
Tested configurations:
- All defconfigs were tested, including `ostest`.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
In order to turn longjmp context-switch safe, it's necessary
to disable interrupts before modifying windowbase and windowstart.
Otherwise, after a context switch, windowstart and windowbase
would be different, leading to a wrongly set windowstart bit due to
longjmp writing it based on the windowbase before the context switch.
This corrupts the registers at the next window overflow reaching
that wrongly set bit.
*Background:*
This PR is related to an issue first observed on ESP-IDF
https://github.com/espressif/esp-idf/issues/5229 and it was, then,
checked on NuttX using a test application.
*The test application:*
To check if the problem affects ESP32, ESP32-S2 and ESP32-S3 on
NuttX, it was created an application based on:
https://en.cppreference.com/w/c/program/longjmp
The application creates 16 tasks (`#define NUMBER_OF_TASKS 16`)
that implements the following daemon:
```
static int setjmp_longjmp_daemon(int argc, char *argv[])
{
for (int i = 0; i < NUMBER_OF_TASKS * 2; i++)
{
jmp_buf env;
volatile int count = 0;
if (setjmp(env) != UINT16_MAX)
{
foo(&env, ++count);
}
}
sem_post(&g_sem);
return EXIT_SUCCESS;
}
```
The main function also initializes a semaphore to avoid application
exiting before tasks return successfully:
```
sem_init(&g_sem, 0, -NUMBER_OF_TASKS);
```
Finally, the round-robin interval was lowered to 1ms to raise the
chances of the longjmp being interrupted by a context switch
(`CONFIG_RR_INTERVAL=1).
This setup was able to reproduce the problem prior to this patch
being applied.
The name used in Tensilica support file core-isa.h for all vendors is
`XCHAL_NUM_INTLEVELS`.
Use a new name may be confused by newer porting xtensa arch.
Change-Id: Ie108d3fdfcc02c81f0eacfca852a1cfc9eea17de
