The lvglterm page still told the reader to pick the input source that
matches the hardware, which was the whole thing being removed: it has
one physical keyboard variant now, and reads whatever is registered.
The hidkbd page pointed at HIDKBD_ENCODED, which no longer exists. What
produces that byte stream now is INPUT_KEYBOARD_BYTESTREAM.
system/kbd had no page at all.
Signed-off-by: Jorge Guzman <jorge.gzm@gmail.com>
Enable the OTG FS host on the Linum board so an external USB HID keyboard
can be used: configure the USB VBUS, power-switch and over-current GPIOs
at board bring-up (the power switch on PI12 is active low) and start the
USB host from stm32_bringup() through stm32_usbhost_initialize().
Add the lvglterm_kbda configuration - the LVGL terminal driven by a USB
HID keyboard on /dev/kbda - with the microSD card enabled alongside the
USB host. They coexist once CONFIG_MMCSD_MMCSUPPORT is left disabled, so
an SD card is not probed as an MMC device.
Also switch esp32s3-m5-cardputer:lvglterm to the renamed matrix-keyboard
input option (EXAMPLES_LVGLTERM_INPUT_KBD_MATRIX) to match the reworked
lvglterm example Kconfig.
Update the documentation accordingly: the LVGL Terminal example page for
the three-way input choice (touch, matrix, USB HID) with cursor-key
scrolling and per-variant configuration plus a photo of the USB variant
running on the Linum, the lvglterm_kbda entry on the Linum board page,
and the matrix-keyboard variant name on the M5Stack Cardputer board page.
Signed-off-by: Jorge Guzman <jorge.gzm@gmail.com>
Add an "lvglterm" configuration that runs the on-screen NuttShell terminal
(apps/examples/lvglterm, touch input variant) on the display: an on-screen
LVGL keyboard driven by the FT5X06 touchscreen feeds the shell and the NSH
output is rendered in an LVGL text area.
Update the apps/examples/lvglterm documentation to describe the two input
variants (on-screen touch keyboard and physical keyboard) and their
configuration options (input source, keyboard device and font choices).
Signed-off-by: Jorge Guzman <jorge.gzm@gmail.com>
BREAKING: In an effort to simplify NuttX initialization, NSH_ARCHINIT is
removed. board_app_initialize is also removed. BOARD_LATE_INITIALIZE now
performs all board initialization logic, and is by default enabled. All
references to these symbols are removed. BOARDIOC_INIT remains, but will
result in -ENOTTY when called. It is to be removed in a later commit.
Quick fix: Boards relying on NSH_ARCHINIT should now enable
CONFIG_BOARD_LATE_INITIALIZE instead. If the application needs
fine-grained control over board initialization from userspace, the logic
performed by BOARDIOC_INIT may be copied to the board_finalinitialize
function and used instead via BOARDIOC_FINALINIT. All
board_app_initialize logic provided by NuttX is now moved to
board_late_initialize, and the same should be done for out-of-tree
boards.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
