Move the stm32l1 sources, headers and boards into arch/arm/src/stm32l1,
arch/arm/include/stm32l1 and boards/arm/stm32l1, then finalize the split:
source each split family directly in arch/arm/Kconfig and boards/Kconfig and
remove the now-empty combined arch/arm/src/stm32 and boards/arm/stm32 trees.
BREAKING CHANGE: The legacy STM32 architecture and board paths were split into
stm32f1, stm32l1, stm32f2, stm32f3, stm32f4, and stm32g4 directories.
Out-of-tree boards must move from stm32 to the matching split family.
Signed-off-by: raiden00pl <raiden00@railab.me>
Move the stm32c0 sources, headers and boards into arch/arm/src/stm32c0,
arch/arm/include/stm32c0 and boards/arm/stm32c0, then finalize the split:
source each split family directly in arch/arm/Kconfig and boards/Kconfig and
remove the now-empty combined arch/arm/src/stm32f0l0g0 and
boards/arm/stm32f0l0g0 trees.
BREAKING CHANGE: The combined STM32F0/L0/G0/C0 architecture and board
paths were split into stm32f0, stm32l0, stm32g0, and stm32c0 directories.
Out-of-tree boards, include paths, source paths, and defconfigs must move
from stm32f0l0g0 to the matching split family.
Signed-off-by: raiden00pl <raiden00@railab.me>
BREAKING: In an effort to simplify NuttX initialization, NSH_ARCHINIT is
removed. board_app_initialize is also removed. BOARD_LATE_INITIALIZE now
performs all board initialization logic, and is by default enabled. All
references to these symbols are removed. BOARDIOC_INIT remains, but will
result in -ENOTTY when called. It is to be removed in a later commit.
Quick fix: Boards relying on NSH_ARCHINIT should now enable
CONFIG_BOARD_LATE_INITIALIZE instead. If the application needs
fine-grained control over board initialization from userspace, the logic
performed by BOARDIOC_INIT may be copied to the board_finalinitialize
function and used instead via BOARDIOC_FINALINIT. All
board_app_initialize logic provided by NuttX is now moved to
board_late_initialize, and the same should be done for out-of-tree
boards.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
nucleo-144 combines 3 different ST boards. This approach is inconsistent with
the support for the rest of the nucleo boards, where each board is in separate folders.
Also nucleo-144 is no longer reserved for STM32F7 chips but other families also use this format.
After this commit nucleo-144 is divided into 3 boards:
- nucleo-f746zg
- nucleo-f767zi
- nucleo-f722ze
ignore known warnings:
/home/raiden00/git/RTOS/nuttx/nuttx/Documentation/reference/os/netdev.rst:61: WARNING: Duplicate C declaration, also defined at reference/os/netdev:39.
Declaration is '.. c:struct:: net_driver_s'.
/home/raiden00/git/RTOS/nuttx/nuttx/Documentation/reference/user/07_signals.rst:180: WARNING: Duplicate C declaration, also defined at reference/user/structures:112.
Declaration is '.. c:struct:: sigaction'.
__dtoa is not used because currently NuttX uses other
function called __dtoa_engine() to do the same thing
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Port based on arch/arm/nrf53.
Modem not fully supported yet. At the moment, initialization and AT interface work.
Sockets and GNSS interface will be added later.
