nuttx/drivers/timers
Kerogit 689ed188c6 sched/clock/clock_delay: added config flag to remove weak up_udelay
While attempting to create architecture-specific implementation
of up_udelay, it was discovered that the overriding function is not
included in the final binary, the weak implementation was used instead.

Further investigation and experimentation showed that the linker
only overrides the weak implementation with the custom one if
the custom one is present in a .c source file that contains at least
one other function that is called from somewhere. Some additional
testing revealed that at least one other already present up_udelay
override (rv32m1-vega:nsh) is affected by this.

In a short mailing list discussion it was determined that this
is a likely result of using static libraries during the build process
and it was suggested to introduce configuration option that will
exclude weak implementations of the function from the build altogether.
This patch does that.

This patch does not enable this configuration option for any existing
board/chip because doing so would change its behaviour and needs
to be tested by users of the hardware.

Also changed is the static assertion in sched/clock/clock_delay.c
to not prevent building the code when architecture declares that
it does not use BOARD_LOOPSPERMSEC to determine required loop count.
BOARD_LOOPSPERMSEC is made undefined in such case.

Patch was tested by building breadxavr:nsh (identical binary by SHA256),
rv32m1-vega:nsh (identical text section) and rv-virt:nsh (text section
differs because of different ordering of functions in the binary, ostest
passed though.)

Signed-off-by: Kerogit <kr.git@kerogit.eu>
2026-06-12 09:55:11 -04:00
..
arch_alarm.c sched/clock/clock_delay: added config flag to remove weak up_udelay 2026-06-12 09:55:11 -04:00
arch_rtc.c rtc_time:set zero rtc_time struct 2025-12-19 01:58:44 +01:00
arch_timer.c sched/clock/clock_delay: added config flag to remove weak up_udelay 2026-06-12 09:55:11 -04:00
capture.c include/debug.h: Move to include/nuttx/debug.h 2026-04-07 07:50:06 -03:00
CMakeLists.txt !drivers: separate pulse count feature from PWM driver 2026-05-25 14:33:11 +02:00
cs2100-cp.c include/debug.h: Move to include/nuttx/debug.h 2026-04-07 07:50:06 -03:00
ds3231.c !nuttx: drop redundant casts on tv_sec/tv_nsec and fix printf formats 2026-05-19 16:21:28 +08:00
ds3231.h drivers: migrate to SPDX identifier 2024-11-06 18:02:25 +08:00
dshot.c drivers/timers: Add common include files, definitions and upper-half for DSHOT 2026-04-30 12:24:47 +08:00
fake_capture.c include/debug.h: Move to include/nuttx/debug.h 2026-04-07 07:50:06 -03:00
goldfish_timer.c driver/timers: Simplify Goldfish timer driver. 2025-11-24 19:43:07 +08:00
Kconfig !drivers: separate pulse count feature from PWM driver 2026-05-25 14:33:11 +02:00
Make.defs !drivers: separate pulse count feature from PWM driver 2026-05-25 14:33:11 +02:00
mcp794xx.c !nuttx: drop redundant casts on tv_sec/tv_nsec and fix printf formats 2026-05-19 16:21:28 +08:00
mcp794xx.h drivers: migrate to SPDX identifier 2024-11-06 18:02:25 +08:00
oneshot.c include/debug.h: Move to include/nuttx/debug.h 2026-04-07 07:50:06 -03:00
pcf85263.c rtc/ptc85263A: Add handling of stop_enable flag. 2026-05-29 01:27:03 +08:00
pcf85263.h rtc/ptc85263A: Add handling of stop_enable flag. 2026-05-29 01:27:03 +08:00
pl031.c drivers: migrate to SPDX identifier 2024-11-06 18:02:25 +08:00
ptp_clock.c drivers: Fix comment typos — 'register' → 'registered' across drivers. 2026-05-28 22:21:47 +08:00
ptp_clock_dummy.c drivers: Fix comment typos — 'register' → 'registered' across drivers. 2026-05-28 22:21:47 +08:00
pulsecount.c !drivers: separate pulse count feature from PWM driver 2026-05-25 14:33:11 +02:00
pwm.c !drivers: separate pulse count feature from PWM driver 2026-05-25 14:33:11 +02:00
rpmsg_rtc.c fs/timerfd: implement TFD_TIMER_CANCEL_ON_SET to detect clock changes 2026-01-30 17:20:24 +08:00
rtc.c drivers: migrate to SPDX identifier 2024-11-06 18:02:25 +08:00
rx8010.c !nuttx: drop redundant casts on tv_sec/tv_nsec and fix printf formats 2026-05-19 16:21:28 +08:00
rx8010.h drivers: migrate to SPDX identifier 2024-11-06 18:02:25 +08:00
timer.c include/debug.h: Move to include/nuttx/debug.h 2026-04-07 07:50:06 -03:00
timer_wdog.c include/debug.h: Move to include/nuttx/debug.h 2026-04-07 07:50:06 -03:00
watchdog.c include/debug.h: Move to include/nuttx/debug.h 2026-04-07 07:50:06 -03:00