Gregory Nutt 559f1ef825 Networking: Clean up and consolidate some clunky stuff by adding new net_timedwait() function		2015-02-09 07:50:10 -06:00
..
arp.h	Networking: Break out Ethernet definitions into a separate file; add IPv6 multicast addresses as common globals, Ethernet drivers need to filter link-local, all nodes Ethernet address	2015-02-04 14:51:20 -06:00
cs89x0.h	wdog.h does not contain any application interface, only internal OS interface. Further, it is non-standard. Move wdog.h from include/ to include/nuttx. For the same reason, move the description of the watchdog timer interfaces from the Users Guide to the Porting Guide.	2014-08-21 11:16:55 -06:00
enc28j60.h	More trailing whilespace removal	2014-04-13 14:32:20 -06:00
encx24j600.h	Add ENCX24J600 Ethernet driver and support for the ENCX24J600 with the Olimex STM32 P107 board. From Max Holtberg	2013-08-25 11:21:54 -06:00
ethernet.h	Networking: Changes need to build ICMPv6 'router' configuration on STM32 with network debug enabled	2015-02-05 11:47:56 -06:00
gmii.h	In order to get PHY interrupts, they must be enabled at the PHY (still don't get PHY interrupts)	2014-08-17 13:03:18 -06:00
icmp.h	Networking: Replace all references to net_ipaddr_t with either in_addr_t on net_ipv6addr_t. The goal is to support both IPv4 and IPv6 simultaneously. This requires that the two types be distinct and not conditionally typedef'ed to net_ipaddr_t.	2015-01-16 12:30:18 -06:00
icmpv6.h	Networking: Add support for sending ICMPv6 Router Solicitation and receiving Router advertisement. This is a part of the ICMPv6 auto-configuration logic is still still not complete	2015-02-03 13:25:28 -06:00
igmp.h	Networking: Misck IPv6 detanglement	2015-01-15 12:19:44 -06:00
iob.h	Networking: The are issues with the TCP write-ahead buffering if CONFIG_NET_NOINTS is enabled: There is a possibility of deadlocks in certain timing conditions. I have not seen this with the Tiva driver that I have been users but other people claim to see the issue on other platforms. Certainly it is a logic error: The network should never wait for TCP read-ahead buffering space to be available. It should drop the packets immediately.	2015-01-27 21:23:42 -06:00
ioctl.h	Add an ioctal() that can be used to perform ICMPv6 auto-configuration	2015-02-03 08:54:42 -06:00
ip.h	Remove inclusion of some un-necessary header files.	2015-02-06 08:50:53 -06:00
ipopt.h	NET: rename include/net/ip.h to ipopt.h	2014-07-04 16:44:53 -06:00
mii.h	In order to get PHY interrupts, they must be enabled at the PHY (still don't get PHY interrupts)	2014-08-17 13:03:18 -06:00
net.h	Networking: Clean up and consolidate some clunky stuff by adding new net_timedwait() function	2015-02-09 07:50:10 -06:00
netconfig.h	Various fixes to get Unix domain sockets to build on the simulator without Ethernet	2015-01-27 14:11:46 -06:00
netdev.h	Networking: Add logic to search the Neighbor Table and update the destination address in the output Ethernet header OR to send an ICMPv6 Neighbor Solicitation if there is no entry in the Neighbor table for the IPv6 address	2015-01-20 14:37:02 -06:00
netstats.h	Networking: Clean up network status collection and presentation for IPv6	2015-01-24 08:26:12 -06:00
phy.h	Finishes the ioctl definition to subscribe to PHY events. Revamp network ioctl signature to support arguments other than struct mii_ioctl_data.	2014-08-16 14:08:04 -06:00
pkt.h	NET: Most of the contents of include/nuttx/net/pkt.h moved to net/pkt/pkt.h	2014-07-05 13:59:22 -06:00
slip.h	Move SLIP prototypes from net.h to new slip.h	2014-08-16 10:28:45 -06:00
tcp.h	Networking: Final detangle off IPv4 and IPv6 TCP/UDP send logic. The Networking subsystem now compiles with IPv6 enabled	2015-01-18 08:56:05 -06:00
udp.h	Networking: Final detangle off IPv4 and IPv6 TCP/UDP send logic. The Networking subsystem now compiles with IPv6 enabled	2015-01-18 08:56:05 -06:00